A researcher observes hydrogen emitting photons of energy 1.89 eV. What are the quantum numbers of the two states involved in the transition that emits these photons?

Where r is the radius, v is the tangential speed, and is the angular speed The tangential speed is 2.1 m/s as a result.

To know more about tangential velocity here

https://brainly.com/question/19660334

#SPJ4

A wave crest is the tallest point in the wave with the greatest displacement value. The junction of the 3-meter and 2-meter waves produces a 1 metre amplitude.

What exactly is amplitude ?

The amplitude of a wave is the measurement of the wave from its still position to its crest or trough. It is measured in metres.

When the wave is crossed, the elevation is 3 metres and the depression is 2 metres, resulting in an amplitude that causes destructive interference. Because 3 m is above the baseline and 2 m is below it, the resultant amplitude is 3 - 2 = 1 m.

As a consequence, the resultant amplitude is one metre.

To learn more about amplitude follow the given link: brainly.com/question/13814350

#SPJ4

A baseball player throws a ball which has a certain change in momentum. The magnitude of the net force on the ball is 72.22 N.

Given that,

Change in momentum Δp = 6.5 kg m/s

Time t = 90 ms = 90 × 10⁻³ s

Change in momentum can be written as,

Δp = m Δv = F×t

As we need net force on the ball,

Δp = F×t

Making F as subject and putting the values we have,

F = Δp/t = 6.5/(90 × 10⁻³) = 72.22 N

Thus, the required net force on the ball is calculated to be 72.22 N.

To know more about momentum:

https://brainly.com/question/15260623

#SPJ4

Answer:

The net force is now 12

Explanation:

The boy is applying a force of 5 newtons + his mother is helping him to apply 7 newtons = 12 newtons.

The largest force that an energy source containing 100 joules can exert continuously over a distance of 25 meters is 25 Newtons (N).

This means that the energy source can exert a force of 25 N for every 100 joules of energy it contains.

The equation for calculating force is Force = Work/Distance (F = W/D).

So, in this case, Force = 100 Joules/25 Meters = 25 Newtons.

Force is a push or pull exerted on an object. It is measured in units of Newtons (N) and is calculated by dividing the amount of work done by the distance over which the work is done. Force can be used to cause an object to accelerate, change its direction, or change its shape.

Learn more about Force:

https://brainly.com/question/12970081

#SPJ4

Answer:

The potential energy can be increased by increasing the mass of the object, by varying the distance between the two objects, decreasing the kinetic energy of the molecules, by freezing, by compressing or stretching, and so on.

Explanation:

Hope this helped !

The balloon's helium has a mass of 2.52 KG.

The quantity of things—which could include humans, animals, plants, or objects—in a given space is referred to as density. To determine density, divide the number of objects by the area's measurement. The number of people in a country divided by its area in square kilometers or miles is known as its population density.

The term "density" refers to the ratio between the volume (the amount of space taken up by an object or substance) and the amount of matter contained therein (its mass). The amount of mass per unit of volume is another method to define density.

The more about density visit:-

https://brainly.com/question/29775886

#SPJ1

Answer:

0 ms-1

Explanation:

This is a trick question.

* Don't be confused with average speed with average velocity

Since the runner ends in the same spot as she started,

the total displacement covered by the runner is zero.

Since  average velocity = total displacement/total time,

As total displacement is zero ,

average velocity = 0 / 50  ms-1

                            = 0 ms-1

Torque is one of the key ideas to comprehend in order to solve problems with rotational motion. Torque is the tendency of a force to produce or change rotational motion.

Torque is a measure of an engine's capacity to control a load and generate a certain level of power to turn the engine on its axis. which is an important part of an automobile engine's power-generating process. Per foot (ft) of rotation about a single point, the force is expressed in pounds (lb).

The force that can cause an object to revolve around an axis is measured in torque. In linear kinematics, force causes an item to accelerate, and torque causes an object to produces the angular acceleration of an object. A vector quantity is a torque.

To know more about torque visit:-

https://brainly.com/question/6855614

#SPJ4

The spring with the higher spring constant (15.0 N/cm) will be more difficult to stretch than the spring with the lower spring constant (10.0 N/cm).

This is because the spring constant is directly related to the amount of force required to stretch the spring. Therefore, the higher the spring constant, the more force that is required to stretch the spring.

The spring constant is a measure of how difficult it is to stretch or compress a spring. It is determined by the stiffness of the spring material, its shape and size, and how much the spring is compressed or stretched.

The higher the spring constant, the more force is required to stretch or compress the spring. The lower the spring constant, the less force is required to stretch or compress the spring.

Learn more about the spring:

https://brainly.com/question/1968517

#SPJ4

53.24 km/hr is the journey's average speed.

Average speed is determined by dividing the entire distance covered by the body in a given amount of time, or Average Speed=Total time.

total radius. A scalar quantity, that is. M/s is its unit.

The length of the entire path traveled divided by the duration of the motion is the definition of average speed.

Total miles traveled: 31.9 + 25.7 + 23.33 = 80.5 km

Average trip speed would be 80.5/1.512=53.24 km.

Total time required to travel this distance is 0.58 hours, 0.266 hours, and 0.666 hours.

To now more about average speed visit:-

https://brainly.com/question/12322912

#SPJ4

The velocity at Point P is 1.72 x 10^(6) m/s.

Mass of proton is Mp = 1.67x10^(-27)

Initial velocity Vo = 2.1x10^6 m/ s

As the proton is moving its Total energy should remain constant throughout the motion to point P.

Conserving the energy,  

Initial energy = Final energy

(1\2)MpVo^2 + (kQ1Q2)/R1 = (1/2)MpV^2 +(kQ1Q2)/R2  

Given R1 = 3.0 mm  

R2 = 4.0 mm  

2kQ1Q2( 1/R1 - 1/ R2) = Mp( V^2 - Vo^2)

2x9x10^9x(-10x10^(-9))x1.6x10^(-19) x {(1000/3)-(1000/4)} = 1.67x10^(-27){ V^2 - Vo^2}  

-2.4x10^(-15) = 1.67x10^(-27){V^2- Vo^2}  

-1.44x10^12 + Vo^2 = V^2  

-1.44x10^12 + (2.1x10^6)^2. = V^2  

2.97x10^(12) = V^2

V = 1.72x10(^6) m/s  

Hence velocity at Point P is 1.72 x 10^(6) m/s.

Proton's speed is dependent on a variety of factors, such as its energy and environment. When protons are released from an accelerator, their speed can be as high as nearly the speed of light, or roughly 300 million meters per second. When protons are found in an environment such as space or the Earth’s atmosphere, their speed is much lower.

In space, protons typically move at around 100 km/s or 0.1% of the speed of light. Within Earth’s atmosphere, protons tend to move much slower, usually around 10 km/s. In the upper atmosphere, protons may be accelerated by solar wind or cosmic rays to speeds of up to 400 km/s. Protons may also be slowed down by collisions with other particles, such as electrons or atoms. In general, the speed of a proton is determined by its energy and the environment it is in.

To learn more about Proton's speed visit here:

brainly.com/question/28216423

#SPJ4

Complete Question:

A proton follows the path shown in (Figure 1). Its initial speed is

[tex]V_0[/tex] = 2.1x10^6 m/s.

Part A What is the proton's speed as it passes through point P? Express your answer to two significant figures and include the appropriate units.

[tex]V_P[/tex][tex]= ?[/tex]

Conclusion part of the scientific method tells us the real answer to the problem.

Analysis and Conclusion ,In this step, the experiment's outcomes are determined using appropriate mathematical and other scientific techniques. The study can be used to determine the best course of action moving forward. The hypothesis is accepted if the evidence from the analysis support it.

The scientific method is a procedure used by scientists to explore, confirm, or create a precise and trustworthy model of any natural phenomenon. They are carried out by developing an objective framework for scientific inquiry, analyzing the findings objectively, and drawing a conclusion that either confirms or disproves the initial observation.

To know more about scientific method

https://brainly.com/question/7980104

#SPJ4

The piston's position, velocity, and acceleration at t = 1.15 s are :

Position: 3.45 m

Velocity: 3 m/s

Acceleration: 0 m/s^2

To calculate the piston's position, velocity, and acceleration at t = 1.15 s, we need to know the angular position, velocity, and acceleration of the wheel.

The angular position of the wheel at t = 1.15 s is given by

θ = ωt + [tex]A_{0}[/tex]

where ω is the angular frequency, t is the time, and [tex]A_{0}[/tex] is the initial angular position.

Since the angular frequency is given as 12 rad/s and the initial angular position is 0, the angular position of the wheel at t = 1.15 s is

θ = 12 x 1.15 = 13.8 radians

The piston's position is given by

r = Rθ

where R is the radius of the wheel.

Substituting the value of R and θ,

r = 0.25 x 13.8 = 3.45 m

The velocity of the piston is given by

v = r' = Rθ' = Rω

Substituting the values

v = Rω = 0.25 x 12 = 3 m/s

Acceleration of the piston is given by

a = v' = Rθ'' = Rω' = R(ω^2)θ

As the angular frequency is constant, the angular acceleration is 0 so the linear acceleration is also 0.

Note: Linear acceleration is not equal to the derivative of linear velocity, it is equal to the derivative of velocity with respect to time, which is zero in this case.

Read more about linear and angular kinematics :

https://brainly.com/question/12977552

#SPJ4

the linear charge density of the infinite line of charge is 5 x 10^-6 C/m.

The linear charge density (λ) of an infinite line of charge is a measure of the charge per unit length. It is given by the equation:

λ = E / k. Where E is the electric field strength at a given point and k is the Coulomb's constant (9 x 10^9 N m²/C²). We know that the electric field strength at a distance of 2.0 m from the line of charge is 4.5 x 10^4 N/C. So we can substitute these values into the equation above to find the linear charge density:λ = (4.5 x 10^4 N/C) / (9 x 10^9 N m²/C²) λ = 5 x 10^-6 C/m Therefore, the linear charge density of the infinite line of charge is 5 x 10^-6 C/m. This means that there is 5 x 10^-6 Coulombs of charge per meter of length on the line of charge.

Learn more about linear charge density here:

https://brainly.com/question/12968377

#SPJ4

Sometimes in phase and sometimes out of phase.The voltage across the resistor and generator will depend on the phase difference between the current and voltage in the circuit.

The voltage across the resistor and generator will depend on the phase difference between the current and voltage in the circuit. If the phase difference is 0°, then the voltage across the resistor and generator will be in phase. If the phase difference is 180°, then the voltage across the resistor and generator will be out of phase. In any other scenario, the voltage across the resistor and generator will be somewhere in between in phase and out of phase.

Sometimes in phase and sometimes out of phase.

learn more about current here

https://brainly.com/question/17120024

#SPJ4

Answer:

1) -5 N, Left

2) 14 N, Up

3) 13, Right

4) 10, Right

5) 22, Down

6) 9, Left

Explanation:

IF: Left or Down, then Negative

1) 15+15=30

Left= 30

Right= 25

30-25=5

30>25

2) 60+10=70

Down= 70

84-70= 14

70<84

3) Left= 62

75-62= 13

Resistance and impedance (in AC circuits) are one such pair of synonyms (DC circuits). Technically speaking, they both stand in the way of current flow, but factor ability of impedance also takes resistance into account.

Obviously all, reactance and inductance are also included in this (capacitors).

Impedance, which results from the interaction of reactance and ohmic resistance, is the active resistance to AC of an electric circuit or component. We also describe it as any restriction of an electric current's ability to move energy when voltage is applied.

The more precise meaning is the overall resistance a circuit of electricity provides to an AC current flowing at a single frequency. In conclusion, we measure reactance and resistance in ohms, and we denote this measurement with the sign Z.

For such more question on impedance .

https://brainly.com/question/13134405

#SPJ4

The greater the mass of an object, the more particles there are in the sample and the more thermal energy it possesses at the same temperature. Assume you have some boiling hot water at 100 degrees Celsius to demonstrate this concept.

Thermal energy is shown by boiling water on a stove. Thermal energy is created when the atoms and molecules of a material vibrate faster as the temperature rises.

Mass is best defined as the quantity of matter contained in any item or body. Everything in our environment has mass. For example, a table, a chair, your bed, a football, a glass, and even air has mass. That being said, all objects are light or heavy because of their mass.

Learn more about   thermal energy  to visit this  link

https://brainly.com/question/18989562

#SPJ4

The continuous acceleration needed to raise a car's speed from 23 mph to 53 mph in four seconds is

The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate. Acceleration is the rate at which speed and direction of velocity vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates.

starting speed is 23 m/h, or 0.0063 m/s.

ultimate speed is 53 m/h, or 0.0147 m/s.

(Final velocity - Initial velocity) / Time = acceleration

= (0.0147 - 0.0063) / 4

= 0.0021m/[tex]s^{2}[/tex]

The acceleration required to increase the speed of a car is 0.0021m/[tex]s^{2}[/tex]

To know more about acceleration on

https://brainly.com/question/28175950

The correct answer is D) Before the mechanic left, the molecules were moving in place. When she returned, they were moving around each other. The change in phase from solid to liquid is due to a change in the motion of molecules.

Molecules are formed when two or more atoms come together and form a chemical bond. Molecules exist in all forms of matter and are the building blocks of all living organisms. Molecules can range in size from the very small, such as hydrogen, to the very large, such as proteins. Generally, molecules are composed of two or more atoms of the same element or different elements that are held together by chemical bonds. Molecules can also be composed of multiple subatomic particles, such as protons and neutrons, which form the nucleus of an atom. Molecules may also contain electrons, which are held in orbit around the nucleus by electrostatic forces. Molecules can have different shapes depending on the arrangement of their constituent atoms. Molecules are essential to all forms of life, as they are responsible for many of the physical and chemical processes that take place in living organisms.

To learn more about molecules
https://brainly.com/question/23080116
#SPJ1

The hand over hand technique lets you turn the steering wheel as much as a half turn while still keeping both hands on the wheel.

Turn the vehicle by lowering the steering wheel in the desired direction (for left turns, pull with your left hand, and vice versa). Relax your other hand and lower the driving wheel. Bring it down to meet your "pulling" hand above your but-tocks, along the wheel. When they come together, let go of the "pulling" hand and let the other to take con-trol.

It is not a good idea to turn off the ignition while the vehicle is in mo-tion, therefore Even though the car has a steering wheel lock, it is not a good idea to switch it off while it is going since it can cause the car to lose con-trol, which can cause problems and accidents.

To know more about steering wheel

https://brainly.com/question/4209682

#SPJ4

A full stop means that there is a complete cessation of the forward movement of the vehicle, or stop with no forward motion.

If two or more automobiles arrive at a four-way stop at the same time, the car to the right shall proceed first. "If two or more automobiles arrive at a four-way stop at the same moment, the car on the right shall proceed first."

Your headlights will allow you to see roughly 400 feet ahead of you. You should travel at a speed that permits you to stop within this distance, which is around 50 miles per hour.

Learn more about to forward motion

https://brainly.com/question/14375816

#SPJ4

The interval by which the factor by which the office noise is related to the standard threshold of hearing is (100,000, 10,000,000].

The factor by which the office noise is related to the standard threshold of hearing is given by x = 10^(d/10), where d is the sound intensity in decibels. Since the decibel reading was consistently above 50 but never above 70, we can calculate the range of x using the following:

50 < d <= 70

10^(50/10) < x <= 10^(70/10)

To find the range of x, we need to calculate the 10^(50/10) and 10^(70/10)

10^(50/10) = 10^5 = 100000

10^(70/10) = 10^7 = 10000000

Therefore, the range of x, the factor by which the office noise is related to the standard threshold of hearing is (100,000, 10,000,000].

Learn more about Threshold value here: https://brainly.com/question/726252

#SPJ4

Your question is incomplete but most probably the complete question is:

Sound intensity, in decibels, d, can be written using a comparison factor, x, that compares sound intensity to the standard threshold of hearing. d = 10log(x) A sensor measures the sound intensity, in decibels, of an office over time. The decibel reading was consistently above 50, but never above 70. On what interval is the factor by which the office noise is related to the standard threshold of hearing? (17, 18.5) (17, 18.5] (100,000, 10,000,000] (100,000, 10,000,000)

The rocket's velocity that goes 700 km north in 25 seconds, then travels another 700km south in 25 seconds is 28,000 m/s.

Given,

To know more about Velocity here

https://brainly.com/question/25749514

#SPJ4

The new velocity of the object after the event is 7.99m/s.

We are given that,

Mass = m = 50kg

Initial velocity = v = 11.2m/s

Energy = E = 1539j

The kinetic energy of object can be calculated as,

K= (1/2)mv²

K = (50×125.44)/2

K = 3136J

Consequently, since both the initial kinetic energy and the total amount of energy transferred are known. The article's resulting energy is easily discernible.

Final energy = initial kinetic energy - the ending energy

Final energy  = 3136-1539= 1597 joules

Therefore, using the equation for kinetic energy derivation, the speed of the object can now be determined.

K.E = 1/2MV²

1597 = 50/2V²

3194 = 50V²

V = 7.99m/s

Therefore , the new velocity of the object after the event would be 7.99m/s.

To know more about velocity

https://brainly.com/question/24926862

#SPJ4

The ideal mechanical advantage is 5.

Here, we have value larger radius , R = 20 cm and smaller radius = 4 cm

So, as per the problem, mechanical advantage will be 20/4 = 5.

A wheel and axle must be permanently joined in order to be considered a simple machine, and the wheel must by definition have a bigger radius than the axle. A point on the wheel moves a distance of 2 R whereas a point on the axle moves a distance of 2 r when you turn the wheel through a full revolution, which likewise causes the axle to turn through a full revolution.

The force you apply F R times the distance the point moves equals the effort W required to move a point on the wheel through one full revolution. Work is energy, and since energy must be conserved, a point on the axle must be subjected to a larger force F r because it moves a shorter distance.

The mathematical relationship is:

W = Fr (subscript) ×2πr/θ =F r(subscript) ×2πR/θ

Where ​θ​ is the angle that the wheel is turned.

And therefore:

Fr(r in subscript) / FR(R in subscript) = R/r

Learn more about mechanical advantage here :

brainly.com/question/16617083

#SPJ4

The energy of the molecules in the ground increases in the given case when the temperature increases.

Convection and conduction are two ways that the Earth's heat is released.

Conduction takes place when the transferring of heat takes place from something hot to something cold.

On the other hand, convection takes place when the transferring of heat takes place by the movement of hot gases or liquids like water, air, or magma to a cooler region.  

Near the surface of the ground, the convection of heat water results in the hot springs and geysers to shoot up into the air through a hole in the ground.

To know more about temperature:

https://brainly.com/question/18271013

#SPJ4

The E = -kλo/xo is the magnitude of the electric field at the origin, negative sign the direction is towards the origin.

What is electric field ?

The force per unit charge imposed on a positive test charge that is at rest at a given position is mathematically defined as the electric field, which is a vector field that can be associated with any point in space.

What is magnitude ?

According to the physics definition, magnitude is just "distance or quantity." It demonstrates how an object moves as it is moving, including whether the movement is absolute, relative, or of a particular size. It serves as a means of describing the size or scope of something. Physicists use the word "magnitude" to indicate size or distance.

a)Lets take an element dx at x distance from origin

Field due to that element of origin; E = k*((λo)dx)/x2 (E = kq/r2)

Integrating from xo to ∞

E =integral( kλo/x2 dx )(xo to ∞)

E = -kλo/xo

b)As we have negative sign the direction is towards the origin

Therefore, E = -kλo/xo is the magnitude of the electric field at the origin, negative sign the direction is towards the origin.

Learn more about electric field from the given link.

https://brainly.com/question/19878202

#SPJ4

Answer:

27s

Explanation:

Time = distance/speed

Time = 219/8

Time = 27.375 s