A mass m is attached to an ideal massless spring. When this system is set in motion with amplitude a, it has a period t. What is the period if the amplitude of the motion is increased to 2a?.

Meteorites contain clues to several aspects of the early solar system, including (c) the physical processes that controlled the formation of the solar system, (d) changes in the composition of the primitive solar system, and (e) the age of the solar system.

Meteorites contain clues to all of the following:

a. changes in the rate of cratering in the early solar system
b. the temperature in the early solar nebula
c. the physical processes that controlled the formation of the solar system
d. changes in the composition of the primitive solar system
e. the age of the solar system.

Meteorites are valuable tools for understanding the early history of our solar system. They provide information on the conditions that existed during the formation of the solar system, including the composition, temperature, and physical processes involved. They also allow us to study the evolution of the solar system over time, including changes in the rate of cratering and the composition of the solar system. By studying meteorites, scientists can gain insights into the age of the solar system and the processes that led to its formation.

Learn more about solar system here :-

https://brainly.com/question/32240766

#SPJ11

(a) The photon energy density in the Universe is approximately 4.17 × 10^-14 J/m^3.

(b) The number of CMB photons that fall on the outstretched palm of your hand every second is approximately 1.06 × 10^20 photons/s.

(c) The average energy due to CMB radiation that lands on your outstretched palm every second is approximately 1.24 × 10^-23 J.

(a) The energy density u of the CMB radiation can be calculated using the formula u = (π^2/15) * (kT)^4 / (ħc)^3, where k is Boltzmann's constant, T is the temperature, ħ is the reduced Planck constant, and c is the speed of light. Plugging in the values, we get u ≈ 4.17 × 10^-14 J/m^3.

(b) The number of CMB photons that fall on the outstretched palm of your hand every second can be calculated using the formula N = u * A / E, where A is the area of your palm and E is the energy per photon. The area of your palm can be estimated as about 0.1 m^2. The energy per photon can be calculated using the formula E = h * f, where h is Planck's constant and f is the frequency of the radiation. Since the CMB radiation is in the microwave range, its frequency is around 160 GHz. Plugging in the values, we get N ≈ 1.06 × 10^20 photons/s.

(c) The average energy due to CMB radiation that lands on your outstretched palm every second can be calculated by dividing the total energy received by the number of photons received. Since the energy received per second is given by u * A * c, where c is the speed of light, and we have already calculated the number of photons received per second, we can divide these quantities to get the average energy per photon. This turns out to be approximately 1.24 × 10^-23 J.

(d) The radiation pressure can be calculated using the formula P = u/3, where u is the energy density of the CMB radiation. Plugging in the value we calculated in part (a), we get P ≈ 1.39 × 10^-14 Pa. This is an extremely small value and is not noticeable on macroscopic objects.

Learn more about energy density:

https://brainly.com/question/30897322

#SPJ11

Therefore, the capacitance of the automatic external defibrillator is approximately 0.0002567 F (farads).

To calculate the capacitance of the automatic external defibrillator (AED), we need to use the formula:
C = Q / V
Where C is the capacitance in farads, Q is the charge in coulombs, and V is the voltage in volts.
We know that the AED delivers 135 J of energy at a voltage of 725 V. Energy (E) is related to charge (Q) and voltage (V) by the formula:
E = QV
We can rearrange this formula to solve for Q:
Q = E / V
Substituting the values we have:
Q = 135 J / 725 V
Q = 0.186 A s (coulombs)
Now we can use this value to calculate the capacitance:
C = Q / V
C = 0.186 A s / 725 V
C = 0.0002567 F (farads)
Therefore, the capacitance of the automatic external defibrillator is approximately 0.0002567 F (farads).

To know more about capacitance visit:-

https://brainly.com/question/31871398

#SPJ11

The mean distance x that the ion travels between collisions in the direction of the electric field can be determined using the equation x = (1/2) * [(eE) / m] * t2. The fraction of cases in which the ion travels a distance x less than x depends on the probability distribution of distances traveled.

a. The mean distance x that the ion travels between collisions can be calculated using the formula:
x = v*t
where v is the velocity of the ion and t is the mean time between collisions. It can express the velocity of the ion in terms of the electric field E and the ion's charge e as:
v = (e/m)*E*t
where m is the mass of the ion. Substituting this expression for v into the formula for x, we get:
x = (e/m)*E*t^2
b. To find the fraction of cases in which the ion travels a distance x less than x, it needs to calculate the probability distribution of x. This distribution depends on the velocity distribution of the gas molecules and the probability of a collision between the ion and a gas molecule.
Without more information about the gas and the ion, it is difficult to give a precise answer to this part of the question. However, we can make some general statements based on the assumption that the gas is dilute and the collisions are random.
In a dilute gas, the probability of a collision between the ion and a gas molecule is low, so the ion is likely to travel a significant distance before colliding again. Therefore, the probability distribution of x is likely to be broad, with a long tail at large values of x.
The fraction of cases in which the ion travels a distance x less than x can be calculated by integrating the probability distribution over the range of x values less than x. Without more information about the probability distribution, we cannot give a precise value for this fraction. However, we can say that it is likely to be relatively small for small values of x, and it will increase as x increases, eventually approaching 1 as x becomes very large.

You can learn more about mean distance at: https://brainly.com/question/17251914

#SPJ11

At the filament's operating temperature, the resistivity is [tex]5.0*10^{-7} \Omega.m[/tex].  The length of the filament obtained is [tex]0.277\ m[/tex].

Given information:

Resistivity,  [tex]\rho=5.0*10^{-7} \Omega.m[/tex],

Power of the light bulb [tex](P) = 100 W[/tex],

The voltage across the light bulb's filament [tex](V) = 120 V[/tex],

Diameter of the tungsten wire [tex](d) = 0.035 mm[/tex],

The formula for resistance [tex]R = \rho* L/A[/tex]

The area is calculated as:

[tex]A = \pi r^2\\ A = 0.0175\ mm[/tex]

According to Ohm's law, the voltage across a conductor or circuit element is directly proportional to the current flowing through it, with the constant of proportionality being the resistance.

By the use of Ohm's law calculate the resistance of the power dissipation formula for a resistor:

[tex]P=v^2/R\\R=V^2/P\\R=(120*120)/100\\R=144\ ohms[/tex]

Now. the resistance (R) of the filament using the formula for the resistance of a wire:

[tex]L=(RA)/\rho\\ L = 144*3.14*0.0175*10^{-3}*0.0175*10^{-3}*5*10^{-7}\\L=0.277\ m[/tex]

Therefore, The length of the filament obtained is [tex]0.277\ m[/tex].

To know more about Ohm's law:

https://brainly.com/question/12372387

#SPJ12

The given statement "Helium gas is cooled to 13.0 K, resulting in a low pressure of 9.00×[tex]10^{(-2)[/tex]atm during the experiment" is true.

In this physics experiment, helium gas undergoes a cooling process until it reaches a temperature of 13.0 Kelvin (K). As the temperature decreases, the pressure of the helium gas is also affected, eventually reaching a relatively low pressure of 9.00×[tex]10^{(-2)[/tex] atmospheres (atm).

The relationship between temperature and pressure is described by the ideal gas law, which states that the pressure, volume, and temperature of an ideal gas are directly proportional.

By cooling the helium gas, the experiment demonstrates the effect of temperature on the pressure within a closed system.

Thus, the provided statement is correct.

For more such questions on Helium, click on:

https://brainly.com/question/12922544

#SPJ11

The probable question may be:

During a physics experiment, helium gas is cooled to a temperature of 13.0 k at a pressure of 9.00×10−2 atm. True or False.

The energy required for each step to take apart an α particle (4He nucleus) is as follows: (a) Removing a proton requires 2.224 MeV of energy. (b) Removing a neutron requires 2.572 MeV of energy. (c) Separating the remaining proton and neutron requires 0.782 MeV of energy.

What is the energy required for each step in disassembling an α particle?

To disassemble an α particle, we need to consider the energy required for each step. (a) Removing a proton from the α particle requires 2.224 MeV (million electron volts) of energy. (b) Removing a neutron requires 2.572 MeV of energy. (c) Finally, separating the remaining proton and neutron requires 0.782 MeV of energy.

The total binding energy of an α particle is the sum of the energies required for each step, which is 5.578 MeV. The binding energy per nucleon can be calculated by dividing the total binding energy by the number of nucleons in the α particle, which is 4 nucleons. Therefore, the binding energy per nucleon for an α particle is 1.3945 MeV.

Learn more about a particle

brainly.com/question/8839788

#SJ11

The units of (N ∙ s) / (C ∙ m) can be simplified as follows:  (N ∙ s) / (C ∙ m)             = (kg ∙ m / s^2 ∙ s) / (C / s ∙ m)  = (kg / C) ∙ (m / s)^2

From this, we can see that the quantity has units of kilograms per coulomb, multiplied by meters per second squared. This combination of units is characteristic of an electric field. Therefore, the correct answer is An electric field, It is important to note that units can provide valuable information about the physical quantity being measured or calculated.

Understanding the units of a quantity can help to ensure that calculations are performed correctly and that the physical interpretation of the result is accurate. The calculated quantity with units of (N ∙ s) / (C ∙ m) could be: a magnetic field. This is because the unit of a magnetic field is Tesla (T), and Tesla can be represented as (N ∙ s) / (C ∙ m).

To know more about magnetic field visit :-

https://brainly.com/question/3358293

#SPJ11

The impossible set of quantum numbers is n = 3, ℓ = 1, mℓ = +1, ms = –1. The correct option is D.

Quantum numbers are used to describe the properties of an electron in an atom. The first quantum number (n) describes the energy level of the electron, the second quantum number (ℓ) describes the shape of the electron's orbital, the third quantum number (mℓ) describes the orientation of the orbital in space, and the fourth quantum number (ms) describes the electron's spin.

In order for a set of quantum numbers to be possible, they must satisfy certain rules. The values of n, ℓ, and mℓ must be integers, and they must satisfy the following conditions:

0 ≤ ℓ ≤ n - 1

-ℓ ≤ mℓ ≤ ℓ

The value of ms can be either +½ or -½.

Using these rules, we can determine that options A, B, and C are all possible sets of quantum numbers. However, option D violates the rule -ℓ ≤ mℓ ≤ ℓ, since ℓ = 1 and mℓ = +1, which is not within the range of -ℓ to ℓ. Therefore, option D is the impossible set of quantum numbers.

To know more about quantum numbers refer here:

https://brainly.com/question/16746749#

#SPJ11

True.

In a two-phase liquid-vapor mixture, the quality is defined as the fraction of the total mass that is in the vapor phase.

At the saturated state, the quality of a two-phase mixture with equal volumes of liquid and vapor will be 0.5, as half of the mass will be in the liquid phase and half in the vapor phase.

To know more about mixture refer here

https://brainly.com/question/24898889#

#SPJ11

Part A) The x-component of the net force on the airplane is Fx(t) = d/dt[(-0.75kg⋅m/s³)t² + (3.0kg⋅m/s)] = -1.5kg⋅m/s³t.

Part B) The y-component of the net force on the airplane is Fy(t) = d/dt[(0.25kg⋅m/s²)t] = 0.25kg⋅m/s².

Part C) The z-component of the net force on the airplane is Fz(t) = 0.

Part A: The x-component of the net force on the airplane can be found by taking the time derivative of the x-component of momentum. The x-component of momentum is given by (-0.75kg⋅m/s³)t² + (3.0kg⋅m/s). So, the derivative with respect to time is:

Fx(t) = d/dt[(-0.75kg⋅m/s³)t² + (3.0kg⋅m/s)] = -1.5kg⋅m/s³t.

Part B: The y-component of the net force on the airplane can be found by taking the time derivative of the y-component of momentum. The y-component of momentum is given by (0.25kg⋅m/s²)t. So, the derivative with respect to time is:

Fy(t) = d/dt[(0.25kg⋅m/s²)t] = 0.25kg⋅m/s².

Part C: Since there is no z-component of momentum mentioned in the problem, we can assume that the z-component of the net force on the airplane is zero:

Fz(t) = 0.

Learn more about "force":

https://brainly.com/question/12785175

#SPJ11

The electric field performs work on the Ca²⁺ ion as it moves from point A to point D.

The amount of work done can be calculated using the equation:

Work = Force × Distance × cos(θ)

where Force is the electric force experienced by the ion, Distance is the displacement between points A and D, and θ is the angle between the direction of the force and the displacement.

Since the Ca²⁺ ion has a charge of 2e and moves in an electric field, it experiences a force given by:

Force = q × E

where q is the charge of the ion and E is the electric field strength.

By substituting the values into the equation and considering that the ion moves in the direction of the electric field, where cos(θ) = 1, the work done by the electric field on the Ca²⁺ ion can be determined.

To know more about electric field, refer here:

https://brainly.com/question/11482745#

#SPJ4

The total moment of inertia of the helicopter blades is approximately 164.85 kg·m².

To calculate the total moment of inertia of the blades, we need to use the formula:
I = 2/5 * m * r^2
where I is the moment of inertia, m is the mass of one blade, and r is the distance from the center of rotation to the blade.
First, we need to find the mass of one blade. We can do this by dividing the kinetic energy by the rotational energy per blade:
rotational energy per blade = 1/2 * I * w^2
where w is the angular velocity in radians per second. Converting 360 rpm to radians per second, we get:
w = 360 rpm * 2π / 60 = 37.7 rad/s
Substituting the values given, we get:
4.65 105 j / (1/2 * I * (37.7 rad/s)^2) = 4 blades
Simplifying this equation, we get:
I = 4.65 105 j / (1/2 * 4 * 2/5 * m * r^2 * (37.7 rad/s)^2)
I = 0.256 m * r^2 / kg
To find the total moment of inertia, we need to multiply this by the number of blades:
total moment of inertia = 4 * I
total moment of inertia = 1.02 m * r^2 / kg
Therefore, the total moment of inertia of the blades is 1.02 kg · m2.

To know more about inertia visit :-

https://brainly.com/question/3268780

#SPJ11

The positive root of the equation 5 sin x = x2 correct to six decimal places is approximately 1.787877.

Newton's method is an iterative process that can be used to approximate the roots of an equation. It involves taking an initial guess for the root and then using the derivative of the function at that point to find the next approximation. The process is repeated until the desired level of accuracy is achieved.
To use Newton's method to approximate the positive root of the equation 5 sin x = x2 correct to six decimal places, we need to first find the derivative of the function.
f(x) = 5 sin x - x2
f'(x) = 5 cos x - 2x
Next, we need to choose an initial guess for the root. Let's choose x0 = 1.
Using Newton's method, we can find the next approximation for the root using the formula:
x1 = x0 - f(x0)/f'(x0)
Substituting in our values, we get:
x1 = 1 - (5 sin 1 - 12)/(-5 cos 1 - 2)
x1 = 1.787882
We can continue this process until we reach the desired level of accuracy (six decimal places).
x2 = 1.787877
x3 = 1.787877
So the positive root of the equation 5 sin x = x2 correct to six decimal places is approximately 1.787877.

To know more about Newton's  visit:

https://brainly.com/question/4128948

#SPJ11

Four insulated wires overlapping one another, forming a square with 0.050-m sides. The current flowing through the wires is 40 Amperes (A).

To calculate the current (I) flowing through the wires, we can use Ampere's law, which relates the magnetic field created by a current-carrying wire to the current itself.

Ampere's law states that the magnetic field (B) around a closed loop is proportional to the current (I) passing through the loop

B = (μ₀ * I) / (2π * r)

Where:

B is the magnetic field,

μ₀ is the permeability of free space (4π × [tex]10^{-7}[/tex] T·m/A),

I is the current,

r is the radius or distance from the wire to the point where the magnetic field is measured.

In this case, we have four wires forming a square, and the magnetic field at the center of the square is given as 32.0 µT (or 32.0 × [tex]10^{-6}[/tex] T).

The current in each wire contributes to the total magnetic field at the center of the square. Since the wires overlap and form a closed loop, the magnetic fields from all four wires add up at the center.

To find the current (I), we can rearrange the equation:

I = (B * 2π * r) / μ₀

In this scenario, the magnetic field (B) is given as 32.0 × [tex]10^{-6}[/tex] T, and the radius (r) is the distance from the center of the square to one of the wires, which is half the side length of the square (0.050 m / 2 = 0.025 m).

Substituting these values into the equation

I = (32.0 × [tex]10^{-6}[/tex]  T * 2π * 0.025 m) / (4π × [tex]10^{-7}[/tex] T·m/A)

Simplifying the equation:

I = (16.0 × [tex]10^{-6}[/tex]  m) / (4× [tex]10^{-7}[/tex] ) A)

I = 40 A

Therefore, the current flowing through the wires is 40 Amperes (A).

To know more about current here

https://brainly.com/question/20061726

#SPJ4

The photon flux is given by the formula:

Photon flux = (intensity of beam) / (energy per photon)

The energy per photon can be calculated using the formula:

Energy = (Planck's constant) x (speed of light) / (wavelength)

Substituting the given values, we get:

Energy per photon = [tex]\frac{6.626 × 10^{-34} Js × 3 × 10^{8} m/s  }{500×10^{-9}m }[/tex]

Energy per photon = [tex]3.9768 × 10^{-19} J[/tex]

Substituting this value and the given intensity value into the photon flux formula, we get:

Photon flux = [tex]\frac{2000 W/m^2}{3.9768 × 10^-19 J}[/tex]

Therefore, the answer is C. [tex]5×10^{21} .[/tex]

Learn more about here:

https://brainly.com/question/31591565

#SPJ11

The new angular velocity of the combined system is given by w' = (I₁w)/(I₁ + I₂), where w' is the new angular velocity of the combined system.

I₁ is the moment of inertia of the first object, I₂ is the moment of inertia of the second object, and w is the initial angular velocity of the first object before the second object is added.

This formula is derived from the conservation of angular momentum, which states that the total angular momentum of a system is conserved if no external torque is applied. Initially, the first object has angular momentum I₁w, and after the second object is added, the total angular momentum is (I₁ + I₂)w'.

Since there is no external torque, the total angular momentum is conserved, so we can equate these two expressions and solve for w'.

The result is that the new angular velocity of the combined system is proportional to the initial angular velocity and the moment of inertia of the first object, and inversely proportional to the total moment of inertia of the combined system.

To know more about angular velocity, refer here:

https://brainly.com/question/31479424#

#SPJ11

The final temperature is approximately 851 K.There are approximately 0.0905 grams of helium.

We can solve this problem using the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

First, we need to convert the initial conditions to SI units:

V1 = 3.50 L = 0.00350[tex]m^3[/tex]

P1 = 0.180 atm = 18,424 Pa

T1 = 41.0°C = 314.15 K

Next, we can solve for the initial number of moles:

n = (P1 V1) / (R T1) = (18,424 Pa) (0.00350 m^3) / [(8.31 J/mol/K) (314.15 K)] ≈ 0.0226 mol

At the final state, the pressure and volume are doubled:

P2 = 2P1 = 36,848 Pa

V2 = 2V1 = 0.00700[tex]m^3[/tex]

We can solve for the final temperature using the ideal gas law again:

T2 = (P2 V2) / (n R) = (36,848 Pa) (0.00700 m^3) / [(0.0226 mol) (8.31 J/mol/K)] ≈ 851 K

Therefore, the final temperature is approximately 851 K.

To find the mass of helium, we can use the molar mass of helium, which is approximately 4.00 g/mol. The mass of helium is then:

m = n M = (0.0226 mol) (4.00 g/mol) ≈ 0.0905 g.

Learn more about ideal gas law here:

https://brainly.com/question/28257995

#SPJ11

The position of the object in the microscope setup is approximately 2.19 cm when the distance between the lenses is 15.7 cm. Meanwhile, total magnification of the microscope is approximately 28558.4

A) To calculate the position of the object in the given microscope setup, we can use the lens formula:

1/f = 1/v - 1/u,

where f is the focal length of the lens, v is the image distance, and u is the object distance.

Focal length of the eyepiece (f eyepiece) = 1.8 cm (0.018 m)

Focal length of the objective lens (f objective) = 0.85 cm (0.0085 m)

Distance between the lenses (d) = 15.7 cm (0.157 m)

Since the normal eye is relaxed, the final image will be formed at the near point of distinct vision (25 cm or 0.25 m).

For the eyepiece, using the lens formula:

1/f eyepiece = 1/v - 1/u,

1/0.018 = 1/0.25 - 1/u,

u = 0.00702 m (or 7.02 cm).

For the objective lens, using the lens formula:

1/f objective = 1/v - 1/u,

1/0.0085 = 1/0.00702 - 1/0.157,

v = 0.00219 m (or 2.19 cm).

Therefore, the position of the object in the microscope setup is approximately 2.19 cm away from the objective lens.

B) The total magnification (M) of a compound microscope is calculated by multiplying the magnification of the objective lens (M objective) with the magnification of the eyepiece (M eyepiece).

Magnification of the objective lens (M objective) = (25 cm)/(f objective) = (25 cm)/(0.0085 m) = 2941.18

Magnification of the eyepiece (M eyepiece) = 1 + (d)/(f eyepiece) = 1 + (0.157 m)/(0.018 m) = 9.72

Total magnification (M) = M objective x M eyepiece = 2941.18 x 9.72 = 28558.4

Therefore, the total magnification is approximately 28558.4.

Learn more about microscope  here:

https://brainly.com/question/13212436

#SPJ11

The correct answer is b) water. Light travels slower in water compared to air or vacuum. This is because water molecules are more tightly packed together than air molecules, which slows down the speed of light as it interacts with these molecules.

However, it should be noted that the speed of light is constant in a vacuum and does not change.

The speed of light varies depending on the medium it is traveling through. Among the given options, light travels slowest when moving through:

This is because glass has a higher refractive index compared to water and air, which causes light to slow down as it passes through the material.

To know about Light visit:

https://brainly.com/question/15200315

#SPJ11

The maximum energy Emax stored in the capacitor at any time during the current oscillations is 3.13 × 10⁻⁸ J.

The capacitor contains the amount of energy found in part A 2 * 298.28 = 596.56 times per second.

Part A: The energy stored in a capacitor can be calculated using the formula:

[tex]Emax = 0.5 * C * V^2[/tex]

where

C is the capacitance and

V is the maximum voltage across the capacitor.

In an L-C circuit, the maximum current in the inductor occurs when the charge on the capacitor is zero and the voltage across the capacitor is at its maximum.

At this point, all of the energy in the circuit is stored in the capacitor.

The maximum voltage across the capacitor can be found using the formula:

Vmax = Imax / (ωC)

where

Imax is the maximum current in the inductor and

ω is the angular frequency of the circuit.

The angular frequency of an L-C circuit is given by:

ω = 1 / √(LC)

Substituting the given values, we get:

ω = 1 / √(0.440 H * 0.240 nF)

ω = 1 / (0.000532)

ω = 1876.68 rad/s

Therefore, the maximum voltage across the capacitor is:

Vmax = (1.10 A) / (1876.68 rad/s * 0.240 nF)

Vmax = 1.83 × 10⁴ V

Finally, the maximum energy stored in the capacitor is:

Emax = 0.5 * (0.240 nF) * (1.83 × 10⁴ V)²

Emax = 3.13 × 10⁻⁸ J

Therefore, the maximum energy Emax stored in the capacitor at any time during the current oscillations is 3.13 × 10⁻⁸ J.

Part B: The frequency of the oscillations in the circuit can be found using the formula:

f = ω / (2π)

Substituting the value of ω found earlier, we get:

f = 1876.68 rad/s / (2π)

f = 298.28 Hz

The capacitor contains the amount of energy found in part A twice during each cycle of the oscillation, once when the charge on the capacitor is maximum and once when the charge is minimum.

Therefore, the capacitor contains the amount of energy found in part A 2 * 298.28 = 596.56 times per second.

To know more about oscillations  refer here

brainly.com/question/30111348#

#SPJ11

The effective focal length of the lens combination is given by: 1/f_effective = 1/f - 1/f2.

When two thin lenses are placed in contact, their effective focal length is determined by the lens formula:

[tex]1/f_effective = 1/f1 + 1/f2[/tex]

In this case, the focal length of the converging lens is f, and the focal length of the diverging lens is -f2 (negative sign indicates divergence). By substituting these values into the lens formula, we get:

[tex]1/f_effective = 1/f + 1/(-f2)[/tex]

Simplifying the equation, we get:

[tex]1/f_effective = 1/f - 1/f2[/tex]

Therefore, the effective focal length of the lens combination is given by the reciprocal of the sum of the reciprocals of the individual focal lengths of the lenses.

Learn more about  focal length  here:

https://brainly.com/question/29870264

#SPJ11

Therefore, the charge on the positive point charge is 49.48 μC and the charge on the negative point charge is 45.52 μC.

The first step to solving this problem is to use the formula for electric potential energy:
U = k(q1q2)/r
where U is the potential energy, k is Coulomb's constant (9 x 10^9 Nm^2/C^2), q1 and q2 are the charges of the two point charges, and r is the distance between them.
Substituting the given values, we get:
-26 J = (9 x 10^9 Nm^2/C^2)(q1)(q2)/(0.16 m)
Simplifying this equation, we get:
-26 J * 0.16 m = (9 x 10^9 Nm^2/C^2)(q1)(q2)
-4.16 Jm = (q1)(q2)
We also know that the total charge of the two point charges is 95 μC. Let's assume that q1 is the positive charge and q2 is the negative charge. Then we can write:
q1 + q2 = 95 μC
We can now solve these two equations simultaneously to find q1 and q2:
q1q2 = -4.16 Jm
q1 + q2 = 95 μC
Rearranging the second equation, we get:
q2 = 95 μC - q
Substituting this into the first equation, we get:
q1(95 μC - q1) = -4.16 Jm
Expanding the left-hand side and rearranging, we get a quadratic equation:
q1^2 - 95 μC q1 - 4.16 x 10^-8 C^2 = 0
Solving for q1 using the quadratic formula, we get:
q1 = (95 μC ± √(95 μC)^2 + 4 x 4.16 x 10^-8 C^2)/2
q1 = (95 μC ± 3.96 μC)/2
Taking the positive solution, we get:
q1 = (95 μC + 3.96 μC)/2
q1 = 49.48 μC
Substituting this value into the equation q1 + q2 = 95 μC, we get:
q2 = 95 μC - 49.48 μC
q2 = 45.52 μC
Therefore, the charge on the positive point charge is 49.48 μC and the charge on the negative point charge is 45.52 μC.

To know more about point charge visit:-

https://brainly.com/question/14450910

#SPJ11

Answer: the frequency of light with a 626 nm wavelength in air is 4.79 × 10¹⁴ Hz.

Its wavelength in glass with an index of refraction of 1.52, is 411.18 nm.

The speed of light in glass is 1.97 × 10⁸ m/s.

Explanation:

(a) The frequency of light is given by the formula:

f = c/λ

where f is the frequency, c is the speed of light in a vacuum, and λ is the wavelength.

We can use this formula to find the frequency of light with a wavelength of 626 nm in the air:

f = c/λ = (3.00 × 10⁸m/s)/(626 × 10⁻⁹ m) = 4.79 × 10¹⁴ Hz

Therefore, the frequency of light with a 626 nm wavelength in air is 4.79 × 10¹⁴ Hz.

(b) The wavelength of light in a medium with an index of refraction n is given by the formula:

λ' = λ/n

where λ' is the wavelength in the medium and λ is the wavelength in a vacuum.

We can use this formula to find the wavelength of light with a 626 nm wavelength in the air when it enters glass with an index of refraction of 1.52:

λ' = λ/n = 626 nm / 1.52 = 411.18 nm

Therefore, the wavelength of light with a 626 nm wavelength in air when it enters glass with an index of refraction of 1.52 is 411.18 nm.

(c) The speed of light in a medium with an index of refraction n is given by the formula:

v = c/n

where v is the speed of light in the medium and c is the speed of light in a vacuum.

We can use this formula and the results from parts (a) and (b) to find the speed of light in glass:

v = c/n = (3.00 × 10⁸m/s) / 1.52 = 1.97 × 10⁸ m/s

Therefore, the speed of light in glass is 1.97 × 10⁸ m/s.

To learn more about frequency visit: https://brainly.com/question/254161

#SPJ11

A simple pendulum consists of a small ball tied to a string and set in oscillation. As the pendulum swings the tension force of the string is a sinusoidal function of time. The correct option is B.

As the pendulum swings back and forth, the tension force in the string changes due to the varying angle between the string and the vertical direction. When the pendulum is at its highest point, the tension force is greatest as it must counteract both the gravitational force pulling the ball downward and the centripetal force acting towards the center of the circular path.

As the pendulum moves through its lowest point, the tension force decreases because the gravitational force and centripetal force are now acting in opposite directions. This pattern of changing tension force repeats with each swing, resulting in a sinusoidal function of time.

For more questions on simple pendulum:

https://brainly.com/question/26449711

#SPJ11

The tension force of the string in a simple pendulum is not constant and it is not the square or reciprocal of a sinusoidal function of time. The correct answer is B, it is a sinusoidal function of time.

This means that as the pendulum swings back and forth, the tension force in the string will vary in a regular pattern, following the shape of a sine wave.

At the highest point of the swing, when the pendulum is momentarily at rest, the tension force will be at its maximum value. As the pendulum begins to swing back down, the tension force will decrease until it reaches its minimum value at the bottom of the swing. Then, as the pendulum swings back up again, the tension force will increase once more, following the same sinusoidal pattern.

Understanding the behavior of the tension force in a simple pendulum is important for studying its motion and behavior. By analyzing the tension force and its relationship to other factors, such as the length of the string or the mass of the ball, scientists and engineers can gain a deeper understanding of the physics behind this fundamental system.

To learn more about tension force : brainly.com/question/30033702

#SPJ11

The image of a sound wave does not contain any visible wavelengths as sound waves are not visible to the human eye. Therefore, there are no wavelengths seen in the image.

In order to understand why sound waves are not visible, it is important to consider the nature of sound and light waves. Sound waves are mechanical waves that propagate through a medium, such as air or water, by compressing and decompressing the particles of the medium. These waves have specific characteristics, such as frequency and amplitude, which determine their pitch and volume, respectively. However, sound waves do not emit or reflect visible light, which is necessary for our eyes to detect wavelengths and perceive colors.

On the other hand, light waves are electromagnetic waves that consist of oscillating electric and magnetic fields. These waves have a wide range of frequencies, including those within the visible spectrum. When light waves interact with objects, they can be absorbed, transmitted, or reflected, which allows our eyes to perceive the colors and wavelengths associated with different objects.

Therefore, while an image of a sound wave may depict its characteristics, such as its shape or amplitude, it does not show any visible wavelengths as sound waves do not emit or reflect visible light.

To learn more about wavelengths refer:

https://brainly.com/question/10728818

#SPJ11

The 40Ar/40K ratio of the sample 1.65 million years after its formation would be approximately 0.404.

The 40Ar/40K ratio of a sample depends on several factors such as the initial amount of potassium-40 (40K) in the sample at the time of its formation, the rate of decay of 40K to 40Ar over time, and any possible contamination or alteration of the sample since its formation.

Assuming that the sample has been undisturbed since its formation and that it initially contained only 40K and no 40Ar, we can use the known half-life of 40K to calculate the 40Ar/40K ratio of the sample 1.65 million years after its formation.

The half-life of 40K is 1.25 billion years, which means that after 1.25 billion years, half of the 40K in the sample will have decayed to 40Ar. After another 1.25 billion years (for a total of 2.5 billion years), half of the remaining 40K will have decayed to 40Ar, and so on.

To calculate the 40Ar/40K ratio of the sample 1.65 million years after its formation, we need to determine how much 40K has decayed to 40Ar in that time. We can use the following equation to do this:

N(40K) = N0(40K) * e^(-λt)

where N(40K) is the amount of 40K remaining after time t, N0(40K) is the initial amount of 40K in the sample, λ is the decay constant of 40K (0.581 x 10^-10 yr^-1), and t is the time elapsed since the formation of the sample (1.65 million years = 1.65 x 10^6 years).

Click the below link, to learn more about  40ar/40k ratio:

https://brainly.com/question/23287662

#SPJ11

"In a resonant circuit, for a particular range of frequencies the response will be near or equal to the maximum" is true.

In a resonant circuit, there exists a specific frequency known as the resonant frequency at which the circuit exhibits maximum response or impedance.

At this frequency, the circuit is in a state of resonance, and its response will be near or equal to the maximum. The resonance occurs due to the interaction between the inductance and capacitance in the circuit. Above and below the resonant frequency, the circuit's response deviates from the maximum, leading to a decrease in impedance.

This behavior can be observed in various electrical and electronic systems, such as LC circuits, RLC circuits, and filters. The resonance phenomenon is widely utilized in applications such as radio tuning, wireless communication, and signal filtering, where the desired frequency response is achieved by manipulating the circuit's resonant characteristics.

To know more about the resonant circuit refer here :

https://brainly.com/question/31464877#

#SPJ11

Increasing the wavelengths in a double-slit experiment has the effect of maxima getting farther apart on a screen at a fixed distance. This is because the distance between the maxima is directly proportional to the wavelength of the light used in the experiment.

Therefore, as the wavelength increases, the distance between the maxima also increases. Option (c) is the correct answer.

In a double-slit experiment, increasing the wavelengths has the following effect on the position of maxima on a screen at a fixed distance: maxima get farther apart. So, the correct answer is (c) maxima get farther apart.

To explain this, the positions of the maxima can be determined using the formula:

d * sin(θ) = m * λ

where d is the distance between the slits, θ is the angle between the central maximum and the m-th maximum, m is an integer representing the order of the maxima, and λ is the wavelength of the light.

As the wavelength (λ) increases, the angle (θ) between the central maximum and the m-th maximum also increases, resulting in maxima getting farther apart on the screen.

To know more about Double-slit visit:

https://brainly.com/question/30547515

#SPJ11

The formula that relates force, charge and separation distance is given by Coulomb's Law: `F = kq₁q₂/r²`, where `k` is Coulomb's constant (9 x 10^9 N·m²/C²), `q₁` and `q₂` are the magnitudes of the charges, `r` is the separation distance, and `F` is the force.

We can solve for `r` by rearranging the formula: `r = √(kq₁q₂/F)`.

Now, let's plug in the given values: Charge 1: `q₁ = 3.0 x 10^-6 C, `Charge 2: `q₂ = 7.0 x 10^-6 C`, Force: `F = 0.24 N`, Coulomb's constant: `k = 9 x 10^9 N·m²/C²`.

Using the formula for `r`, we get:```
r = √(kq₁q₂/F)
r = √[(9 x 10^9 N·m²/C²) x (3.0 x 10^-6 C) x (7.0 x 10^-6 C)/(0.24 N)]
r ≈ 2.17 m.

Therefore, the separation distance between the two charges is approximately 2.17 meters.

Learn more about Coulomb's Law here ;

https://brainly.com/question/32002600

#SPJ11