A kettle was tested for its energy efficiency. Its power rating was 900 W. Over the course of 4 minutes and 30 seconds, its useful energy output was 0.05 kWh. How do I answer this ?

When working with a Hybrid Vehicle (HV), there are certain safety precautions that must be taken in order to ensure the safety of you and your vehicle. First and foremost, make sure you read and understand the vehicle’s owner's manual before attempting to operate the vehicle.

This is the best source of information for understanding the safety features and operational guidelines for the HV.

Additionally, always use the correct size and type of tires, as stated in the owner’s manual. This will help to ensure optimal performance and safety. Additionally, inspect the brakes of the hybrid vehicle HV regularly, and make sure all lights and signals are working properly.

Finally, check the battery and make sure it is in good condition. Following these steps will help to ensure the safe and efficient operation of your HV.

To learn more about hybrid, click here:

https://brainly.com/question/14610495

#SPJ4

Light travels in straight lines. This explains how shadows are formed on sunny days, how images are formed in cameras, and why there are  reflection in mirrors.

When two different media come together at an interface, a wavefront might change direction so that it returns to the first medium, which is termed as reflection. The reflection of light, sound, and water waves are typical examples. According to the law of reflection, the angle at which the wave incident on the surface equals the angle at which it is reflected for specular reflection (such as at a mirror).

You cannot see something unless you have 'line of sight' and the light can travel from the object to your eye in  straight line. Light waves are one of the ways that energy from the Sun reaches the Earth.

To know more about Light visit

https://brainly.com/question/10507280

#SPJ1

As a result, the first path would take 1 hour, 18 minutes to get you there.

Duration is the whole time that anything exists. A duration might be short, like the duration of a party, or it can be extensive, like the length of a lecture series. The time it takes to finish anything has come to be denoted by the term duration. Except for noon and midnight, use numerals for the times; separate the hours and minutes with a colon; and avoid using cyphers (double zeros) for complete hours.

It would take around 1 hour and 18 minutes to travel the first route, which is 70 miles long and travels at 55 mph. It would take around 1 hour and 21 minutes to travel the second route, which is 85 miles long and travels at a speed of 65 mph.

To know more about Amount of time visit:

https://brainly.com/question/24078955

#SPJ4

The domain of that function is a real number or can be written as {x | x is a real number}. The range of that funciton is {y | y > 0}.

Domain is all possibly value of "x" for a function to keep functional. In short, domain is a parameter of the function to work.  By its definition, domain is a real number or in math written as {x | x is a real number}

As per given function f(x) = 4(3√81)ˣ. Because of there is no negative sign in the formula, The value of f(x) has to be greater than zero. So, f(x) > 0 or y > 0. Range = {y | y > 0}

Learn more about domain here

https://brainly.com/question/2264373

#SPJ4

Answer:

8.74 m

Explanation:

W = FΔx

376 = 43(Δx)

8.74 = Δx

Hey there everyone!

_____________________________________________________

Answer:

So, if you have the following to choose from:

O 368 m

O 44.6 m

O 384 m

O 3170 m

44.6 m (aka. Option B) is correct.

_______________________________________________________

Step By Step Explanation:

1. F = 8.43 N

2. W = 376 J

3. W = F x d

4. 376 J = 8.43 N × d

5. d = 44.6 m ← Our Final Solution

_______________________________________________________

Hope this helps! If you still need help on this, feel free to check out the flash cards I made below.

h t t p s : / / q u i z l e t . c o m / 7 6 4 3 6 7 9 6 0 / p h y s i c a l - s c i e n c e - 2 2 - f o r c e - a n d - w o r k - r e l a t i o n s h i p s - f l a s h - c a r d s / ? n e w

Answer:

monkey tunky funky luncky

The amount of energy required to escape from the surface are:

To calculate the energy required to escape from the surface of relative to that required to escape from the surface of Earth, we can use the formula for escape velocity (Ve) which is:

Where G is the gravitational constant, M is the mass of the celestial body and R is its radius.

First, we need to calculate the escape velocity of Venus (VeV) and Earth (VeE) using the formula above:

And the ratio of VeV/VeE = √(M_V/R_V) / √(M_E/R_E)

Given the mass of Venus is 4.87 x 10^24 kg and radius of Venus is 6.0518 x 10^3 km, we can calculate the ratio of Venus escape velocity over Earth escape velocity:

So the energy required to escape from the surface of Venus relative to that required to escape from the surface of Earth is about 0.9. This means that Venus escape velocity is 90% of the energy required to escape Earth.

To calculate the escape velocity of Venus in m/s, we can use the same formula:

Where G is the gravitational constant (G = 6.67 x 10^-11 Nm^2/kg^2), M is the mass of Venus (M = 4.87 x 10^24 kg) and R is its radius (R = 6.0518 x 10^3 km). Hence:

Given the mass of the Sun is 1.989 x 10^30 kg and radius of the Sun is 6.963 x 10^8 meters, we can calculate the ratio of the Sun's escape velocity over Earth escape velocity:

So the energy required to escape from the surface of the Sun relative to that required to escape from the surface of Earth is about 2 x 10^5 (two hundred thousand) times the energy required to escape Earth. This means that the Sun's escape velocity is 200,000 times larger than the energy required to escape Earth.

To calculate the escape velocity of The Sun in m/s, we can use the same formula as Venus:

Learn more about escape velocity here: brainly.com/question/29911258

#SPJ4

Answer: B

Explanation:

As gas bubbles accumulate, the upward pressure increases, forcing cracks in the rocks to widen, often in the direction of Earth's surface. For magma to erupt from a volcano, this upward pressure must exceed the downward pressure that is exerted by the eight-kilometer (five mile) thick load of rock overhead.

Answer:

one mole of each gas has the same number of molecules (Avogadro's No)

i mole He = 4 grams

1 mole Argon = 38 grams

1 mole Argon / 1 mole He = 9.5

one would need 950 ml of Ar gas

The velocity of the cart on the right that has a mass of 4. 5 kg is 0.09 m/s.

Velocity is the rate of change of distance with respect to time.

Mass on the left of the cart = m1 = 1.5 kg

on the left of the cart = v1 = 27 cm/s = 0.27m/s

Mass on the right of the cart = 4.5 kg

Velocity on the right of the cart = x

According to the law of conservation of linear momentum:

We can say that.

Initial momentum will equalize the final momentum.

And momentum is the product of mass and its velocity.

Assigning one of its velocity as negative because both are in different direction.

mathematically, (m1*-v1) + (m2v2) = 0

(1.5*-0.27) + (4.4*x) = 0

x = 0.09 m/s

So the velocity of the cart on the right side that has a mass of  is 0.09 m/s.

To know more about velocity,

https://brainly.com/question/29153841

#SPJ4

The domain of f(x) = –37 is all the real numbers. And, the range of f(x) = –37 is y = –37.

The given function f(x) = –37 is a horizontal line which goes from negative infinity to positive infinity.

In this case, the domain can be any number since there is no limit on what the x value can be.

So, the domain of the given function f(x) = –37 will be all real numbers.

And, the range will always be y = –37 because no matter what x value will equal, y will always be equal to –37 in the function of f(x) = –37.

So, the range of the given function f(x) = –37 will be y = –37.

Learn more about domain and range at: https://brainly.com/question/28135761

#SPJ4

Answer:

V=∆s/∆t

V=800/4

V=200

you have to change 8meters into centimeters and please let me know if I'm wrong

The students can ensure accurate data, by repeating the experiment several times.

option B.

The accuracy of an experiment is how close the final result is to the correct or accepted value. The closer it is, the more accurate the experiment.

The accuracy of an experiment is obtained by performing the experiment repeatedly or many times.

Thus, for the team of students to obtain an accurate result on the effect of gravity on different objects with the same mass and  time it takes the

objects to fall from the top of the school's bleachers, they must perform the experiment many times.

Learn more about accuracy of experiment here: https://brainly.com/question/23469197

#SPJ1

Answer:

(Question) Which statement about mass is correct?

(Answer)  Mass is the measure of the amount of matter in an object.

(Question) A student designs a gravity experiment. She will time how long it takes different objects to fall from her school’s roof to the ground. She will use three objects: a 2-foot-long board, a toy car, and a paper bag. What is wrong with her experiment’s design?

(Answer)  The objects do not have the same size, shape, or mass, so any differences in drop times cannot be attributed to one variable.

(Question) Which statement about gravity is correct?

(Answer)  Gravity is a force that attracts objects with mass toward each other.

(Question) A team of students performs an experiment to test the effect of gravity on different objects with the same mass. They measure how long it takes the objects to fall from the top of the school’s bleachers. How can they insure they get accurate data?

(Answer) by repeating the experiment several times

(Question) Students analyze their data from a gravity experiment. They find that objects fall at a greater speed from a greater height than from a lower height. What can they conclude?

(Answer)  The longer an object falls, the more gravity increases its speed.

Explanation:

i just finished the quick check. enjoy

The solar energy is  Non-exhaustible resource​. Hence, option (d) is correct.

A natural resource that can be replenished to replace the portion used up by usage and consumption is known as a renewable resource, also known as a flow resource. This replenishment can occur naturally through reproduction or through other recurring processes in a limited amount of time on a human time scale.

The natural environment of the Earth and the main elements of its ecosphere are renewable resources. A resource's sustainability can be determined in large part by looking at its life-cycle assessment.

Learn more about   renewable resources here:

https://brainly.com/question/19048855

#SPJ1

The coefficient of the static friction(ц) between the coin and the surface is v²/gR.

The mass of the coin = m kg

The distance of the coin from the axis of rotation = R meter

Let the speed of the rotating surface = v m/sec

We know that an object moving in a circular motion on a circular path of radius R, experiences a centrifugal force which acts outwards from the axis of rotation. This force is determined by the following formula,

F = mv²/R

This force is balance by the static friction force on the coin.

Static friction force on the coin = mg × static friction(ц)

mv²/R = mg × static friction(ц)

Static friction(ц) = v²/gR

To know more about static friction, here

https://brainly.com/question/24882156

#SPJ4

Answer:

Overhead cables are often slack to allow to expand on hot days without breaking.

Explanation:

They hang power lines with enough (even it seems tons!) slack to allow conductors to expand and contract due to the variations in ambient temperature and the current flowing through them. If strung tight, they will keep snapping causing the disruption in power flow.

Overhead cables are often slack to allow them to expand on hot days without breaking, as overhead cables, such as electrical power lines or communication cables, are exposed to various environmental conditions, including temperature fluctuations. Here option a is correct.

When temperatures rise, materials, including metals used in cables, tend to expand. This expansion can lead to increased tension and stress within the cable. If a cable is already under high tension and does not have room for expansion, it can potentially lead to structural damage or even breakage. To accommodate the expansion of the cables during hot weather, they are deliberately kept slack or loose. By allowing some slack in the cables, they have the flexibility to expand and contract with changes in temperature. This prevents excessive tension and reduces the risk of the cables becoming overstressed and breaking.

Learn more about overhead cables here.

https://brainly.com/question/33393997

#SPJ2

complete question is below

Complete the following sentence. Overhead cables are often slack to allow them to __________ on hot days without breaking.

a, expand

b, contract

Due to its only being able to travel to and fro, if an item goes in a straight line northern, the only additional direction it may move is southward.

Since linear motion consists of movement in one dimension in a straight line, also called as rectilinear motion, it may be analytically described only using just that spatial dimension.

The two forms of linear motion are non-uniform motion with changing velocity and non-zero acceleration.

Uniform linear motion is defined by a constant speed or no acceleration. A person moving linearly would sprint 100 m on a smooth path.

To know more about straight line motion do visit:

https://brainly.com/question/24728413

#SPJ4

Six examples in which Physics has been used in daily life include:

Physics plays a major role in transportation, from the design of cars and airplanes to the operation of trains and buses. Physics is also used in communications, from the design of telephone networks to the operation of the internet.

Physics is used to generate energy from various sources, such as fossil fuels, nuclear power, hydroelectric power, and wind power. Physics is used in medical imaging, such as X-rays, CT scans, and MRI.

Physics plays a major role in construction, from the design of buildings and bridges to the materials used in construction.  Physics is also used in entertainment, from the design of amusement park rides to the operation of video games.

Find out more on the uses of physics at https://brainly.com/question/24517831

#SPJ1

The refractive index of the eye cannot be determined with the information provided.

This refers to the value obtained from the ratio of the speed of light in a vacuum to that in a second medium of greater density.

The refractive index is also equivalent to the velocity of light c of a given wavelength in empty space divided by its velocity v in a substance.

It can be calculated using the formula:

n = c/v.

where,

n = the refractive index of the eye

c = wavelength in empty space

v = the  velocity of light

From the question:

r = 0.78 cm

i = 3 cm

The radius of curvature and the location of the image formed by an object at infinity is related to the eye's optics, but the refractive index also depends on the materials of the various parts of the eye, such as the cornea and lens.

Hence, the refractive index can also vary depending on the specific wavelength of light being considered.

Learn more about refractive index on

https://brainly.com/question/23750645

#SPJ1

The volume of the balloon will be 0.494 liters.

Volume is described as a measure of three-dimensional space which  is often quantified numerically using SI derived units or by various imperial or US customary units.

We will use Charles law to solve for the volume and it states that  the volume of the gas is directly proportional to the temperature of the gas at constant pressure and number of moles.

Mathematically V1 / T1 = V2/ T2

where,

v1 = initial volume of gas = ?

v2 = final volume of gas = 0.54 L

T1 = initial temperature of gas = 273.15 K

T2 = final temperature of gas = 298.5 K

Substitute all the given values in the above equation, we get the initial volume of balloon.

V1 / 0.54 = 273.15/ 273.15

v1 = 0.494 liters.

Learn more about volume at:

https://brainly.com/question/463363

#SPJ1

The angle that Boulevard N makes with Street L north of their intersection is also 75°.

Intersection is a point where two or more lines, curves, surfaces, or objects meet or cross each other. It is a common concept in mathematics, engineering, and everyday life. In mathematics, an intersection is a point where two or more sets of objects meet. In engineering, an intersection is a point where two or more roads, railways, or other transportation routes meet. In everyday life, an intersection is a point where two or more paths, streets, or other routes meet. Intersections are important in transportation, as they are the points where vehicles can change direction or turn around. Intersections are also important in mathematics, as they are the points where two or more lines, curves, or surfaces meet.

This is because the angle formed by two parallel lines is always equal. Since A and L run parallel to each other, the angle formed by Boulevard N and Street L south of their intersection is equal to the angle formed by Boulevard N and Street L north of their intersection. Therefore, the angle that Boulevard N makes with Street L north of their intersection is also 75°.

To learn more about intersection
https://brainly.com/question/29459409
#SPJ1

Which example shows Pascal's principle a hydraulic jack .

What is a hydraulic jack?

A hydraulic jack is a device used to lift heavy objects or materials by using a hydraulic cylinder to generate a large amount of force. It works by using a pump to transfer fluid from a reservoir into a cylinder, which in turn applies pressure to a piston.

When the pressure is high enough, the piston will push against the object it is lifting, allowing the user to raise or lower the object. Hydraulic jacks are often used for automotive repair, construction, and other heavy-lifting applications.

To learn about more hydraulic jack.

https://brainly.com/question/19165750

#SPJ1

Nuclear energy is the energy in the nucleus, or core, of an atom. Nuclear energy can be used to create kinetic energy or electricity, but it must first be released from the atom.

Nuclear energy originates from the splitting of uranium atoms – a process called fission. This generates heat to produce steam, which is used by a turbine generator to generate electricity. Because nuclear power plants do not burn fuel, they do not produce greenhouse gas emissions.

Some primary uses of nuclear energy are- Space Exploration, Nuclear energy provides nearly 20% of electricity in many countries like United States, Medical Diagnosis and Treatment, Criminal Investigation and Agriculture.

To know more about Nuclear energy, visit:

https://brainly.com/question/2240073

#SPJ1

A ball has a momentum of 5 kg m/s before it hits a block of wood which is at rest. After the collision, the ball is at rest. the final momentum of the block remains constant as per the law of conservation of momentum.

As per the law of conservation of momentum, The complete momentum of two or more bodies acting on one another in an isolated system remains constant unless an external force is applied.

Hence, as per the statement given there is no external force is applying so, the final momentum of the block is equal to ball's momentum and remains constant.

To know more about law of conservation of momentum visit

https://brainly.com/question/24131537

#SPJ1

Answer: Elephant

Explanation: Because of an elephants weight and size, it would require more force for acceleration when compared to a lion, mouse, and/or dog.

Although mass does not directly affect speed, as an object's speed increases, so does its mass. The term "mass" refers to a thing's total amount of energy. Thus, we draw the conclusion that while a particle's mass increases with speed, its charge stays constant.

A thing's mass is the total amount of stuff or substance that constitutes it. The measurement unit is the kilogramme, also written as kg. It's important to remember that mass is distinct from weight. Mass never changes, whereas weight fluctuates as the centre of gravity shifts. The best way to understand mass is to think about how much matter each object or body is made up of. Everything that we can see has mass.

A balance is used to determine an object's mass for the majority of commonplace objects. The balance compares the target object to a known mass object. Digital scientific balances and beam balances, like a triple beam balance, are examples of several sorts of balances.

To know more about Mass visit:

https://brainly.com/question/18064917

#SPJ1

An equation that will let you calculate the last Q that was needed for this temperature change is Q = MCΔT.

The following formula can be used to determine how much heat is required to cause a change in temperature:

Q = MCΔT

Where:

The required heat, Q, is expressed in joules (J).

M is the substance's mass, expressed in grams (g)

C is a substance's specific heat capacity expressed in J/g°C.

T is the change in temperature expressed in degrees celsius (°C).

As a result, we can determine how much heat is required to change the temperature as follows:

Q = MCΔT

Q = 420 x 3.52 x 43.8

Q = 64753.92 J

Thus, 64753.92 J of heat are required to change the temperature.

Your question is incomplete but most pprobably your full question was

The specific heat capacity of a pure substance can be found by dividing the heat needed to change the temperature of a sample of the substance by the mass of the sample and by the change in temperature. The specific heat capacity of a certain substance has been measured to be 3.52 J/g °C. Suppose 420.0 g of the substance is heated until the temperature of the sample has changed by 43.8 °C.

Write an equation that will let you calculate the last Q that was needed for this temperature change. Your equation should contain only symbols. Be sure to define each symbol.

Learn more about specific heat capacity at https://brainly.com/question/29766819

#SPJ4

Answer:

1489.6 Joules

Explanation:

Potential Energy:

[tex] \displaystyle{\text{PE} = mgh}[/tex]

m is mass (kg), g is acceleration due to gravity which is 9.8 m/s² (some people use 10 m/s² which is acceptable) and h is height. Hence, substitute in known values:

[tex] \displaystyle{\text{PE} = 19 \times 9.8 \times 8} \\ \\ \displaystyle{\text{PE} =1489.6 \: \text{J}}[/tex]

Hence, the potential energy is 1489.6 Joules

The intriguing functions of mirror neurons are described by neuroscientist Vilayanur Ramachandran. These neurons, which have only lately been found, enable us to acquire intricate social skills.

A mirrors is a collection of features that reflects light and creates an actual or fictitious picture. When an item is placed front of a mirror, the mirror reflects the same object. Glass can also be coated with metal to create mirrors.

Wet depositing of silver or aluminum is primarily used in the manufacture of contemporary mirrors. The glass substrate is first cleaned and polished to get rid of blemishes and pollutants. Next, a sequence of coatings must be applied to the glass, starting with tin chloride.

To know more about mirror visit:

https://brainly.com/question/3795433

#SPJ1