Here's the code that addresses your question:
```c
#include
int *get_int_p(void);
void exact_change(int quantity, int *dollars, int *quarters, int *dimes, int *nickles, int *pennies);
int main() {
int *integer_pointer = get_int_p();
printf("The integer referenced: %d\n", *integer_pointer);
int change = 247, dollars, quarters, dimes, nickels, pennies;
exact_change(change, &dollars, &quarters, &dimes, &nickels, &pennies);
printf("Change of %d cents: %d dollars, %d quarters, %d dimes, %d nickels, and %d pennies.\n", change, dollars, quarters, dimes, nickels, pennies);
return 0;
}
int *get_int_p(void) {
static int num = 42;
return #
}
void exact_change(int quantity, int *dollars, int *quarters, int *dimes, int *nickles, int *pennies) {
*dollars = quantity / 100;
quantity %= 100;
*quarters = quantity / 25;
quantity %= 25;
*dimes = quantity / 10;
quantity %= 10;
*nickles = quantity / 5;
quantity %= 5;
*pennies = quantity;
}
```
This code defines the `get_int_p` function, which returns a pointer to an integer. It then calls this function and prints the integer referenced. The `exact_change` function calculates the change using the fewest number of coins and returns the result using the references provided.
Know more about the code click here:
https://brainly.com/question/17204194
#SPJ11
Match term to description.
Primary storage for most computers, it often goes by the drive letter C. Today, the typical capacity for this type of storage is 500 gigabytes to 2 terabytes or more.
1 Choose. A type of optical storage generally used for music or data. The capacity for this type of storage is approximately 700 megabytes.
2 Choose. A type of optical storage generally used for movies or data. The capacity for this type of storage is in the range of 4. 7 to 8. 5 gigabytes
3 Choose. A type of solid-state storage, this device connects to the computer through a USB port. Common capacities are 8 GB to 256 GB though two terabyte drives are now available.
4 Choose. A place to plug in a secondary circuit board such as a modem or sound card.
5 Choose. The primary circuit board; everything must eventually connect to this component.
6 Choose. An external connection point where devices may be plugged into the computer.
7 Choose. Pathways on the motherboard over which data can travel from place to place
8 Choose. Contains instructions to get the computer started and the operating system loaded into RAM (non-volatile; read-only)
9 Choose. The primary microchip inside the computer, it oversees the operations of the computer and executes instructions
Primary storage for most computers, typically referred to as the C drive, has a capacity ranging from 500 gigabytes to 2 terabytes or more.
Optical storage used for music or data has a capacity of approximately 700 megabytes.
Optical storage used for movies or data has a capacity in the range of 4.7 to 8.5 gigabytes.
Solid-state storage that connects to the computer via a USB port has common capacities of 8 GB to 256 GB, with two terabyte drives now available.
A slot or connector on the motherboard where secondary circuit boards, such as modems or sound cards, can be plugged in.
The motherboard is the primary circuit board where all components of the computer connect.
An external connection point on the computer where devices can be plugged in, such as USB ports.
Pathways on the motherboard that allow data to travel between different components of the computer.
Read-only memory (ROM) contains the instructions to start the computer and load the operating system into RAM.
The central processing unit (CPU) is the primary microchip inside the computer that oversees operations and executes instructions.
In summary, the matching terms are as follows:
Primary Storage
Optical Storage for music or data
Optical Storage for movies or data
Solid-State Storage (USB-connected)
Slot for secondary circuit board
Motherboard
External connection point
Pathways on the motherboard
Read-only memory (ROM)
Central Processing Unit (CPU)
learn more about Primary storage here:
https://brainly.com/question/520781
#SPJ11
(T/F) a process that is waiting for access to a critical section does not consume processor time.
Answer:
false
Explanation:
True, a process that is waiting for access to a critical section does not consume processor time. A critical section is a segment of code that must be executed atomically, meaning that it cannot be interrupted by other processes or threads. To ensure mutual exclusion and prevent race conditions, processes must acquire a lock before entering the critical section and release the lock when they exit it.
When a process attempts to enter a critical section and finds that the lock is held by another process, it will be put into a waiting state until the lock is released. During this time, the process is not executing any code and is not using any processor time. This is done to avoid any conflicts or issues that might arise if multiple processes tried to access the same critical section at the same time.
In summary, a process that is waiting for access to a critical section is not using processor time and is in a waiting state until it acquires the lock.
For more information on processors visit:
brainly.com/question/20340862
#SPJ11
Let a = 1. 0 × 29, b = − 1. 0 × 29 and c = 1. 0 × 21. Using the floating-point model described in the text (the representation uses a 14-bit format, 5 bits for the exponent with a bias of 15, a normalized mantissa of 8 bits, and a single sign bit for the number), perform the following calculations, paying close attention to the order of operations. What can you say about the algebraic properties of floating-point arithmetic in our finite model? Do you think this algebraic anomaly holds under multiplication as well as addition?
b + (a + c) =
(b + a) + c =
The calculation b + (a + c) in the given floating-point model results in 1000.11011000 × 2^11100.
The algebraic properties of floating-point arithmetic in the finite model show that addition is not associative. The calculations (b + a) + c and b + (a + c) yield different results. This suggests that the order of operations affects the outcome. The algebraic anomaly observed in addition may not hold for multiplication, as floating-point multiplication in finite models is generally non-commutative and non-associative.
Learn more about floating point model here : brainly.com/question/25286163
#SPJ11
microblogging consists of short messages exchanged on social media networks.
T/F
The given statement "microblogging consists of short messages exchanged on social media networks" is true.
Microblogging involves writing and sharing short messages, usually no more than 280 characters, on social media networks. These messages can include text, images, videos etc. and they are designed to be easily consumed and shared by users. Microblogging has become increasingly popular in recent years due to its simplicity, convenience, and ability to quickly spread information to a large audience.
Many businesses and individuals use microblogging as part of their social media marketing strategies to engage with their followers, build brand awareness, and promote their products or services. Overall, microblogging is a powerful tool for communication and engagement on social media networks, and it is likely to continue growing in popularity in the years to come.
Hence, the statement is true.
To learn more about Microblogging visit:
https://brainly.com/question/14930295
#SPJ11
What should you do when conducting an informational interview ?
When conducting an informational interview, it is important to prepare questions in advance, actively listen, and show gratitude for the person's time and insights. Building rapport and gathering valuable information are key objectives.
During an informational interview, it is crucial to approach the conversation with a clear purpose and set of questions to gather insights and information from the interviewee. Actively listen to their responses and take notes to ensure you can follow up and refer back to the conversation later. Show appreciation and gratitude for the interviewee's time and willingness to share their experiences and knowledge. Thank them at the beginning and end of the interview, and consider sending a thank-you note or email afterward as a gesture of appreciation.
Maintain a professional demeanor throughout the interview, ask open-ended questions, and allow the interviewee to share their insights and experiences. Respect their time and avoid overstaying the allotted interview duration. Remember, an informational interview is an opportunity to learn and network, so approach it with curiosity, respect, and a genuine interest in the other person's expertise.
Learn more about information here: https://brainly.com/question/31713424
#SPJ11
Let's assume that there are many points in 3-D space. Each point has its coordinate as (x, y, z). All x, y, z are floating point value. Anyway, can you sort these 3-D point by an sorting order string "xyz"? That's means x coordinate is primary, y is secondary, z is last priority? The order string can be of any combination of "xyz", "xzy", "yxz", "yzx", "zxy", "zyx" Hint: using lambda expression and Python sorted function Sample Inputs: [(2, 1, 2), (2, 1, 3), (1, 2, 3), (1, 2, 2), (3, 1, 2), (3, 3, 1), (2,3,1), (1, 3, 3), (2, 4, 1)] Sample output: Original: [(2, 1, 2), (2, 1, 3), (1, 2, 3), (1, 2, 2), (3, 1, 2), (3,3,1), (2, 3, 1), (1,3,3), (2, 4, 1)] Sorted by xyz: [(1, 2, 2), (1, 2, 3), (1, 3, 3), (2, 1, 2), (2, 1, 3), (2, 3, 1), (2, 4, 1), (3, 1, 2), (3, 3, 1)] Sorted by zyx: [(2,3,1), (3, 3, 1), (2, 4, 1), (2, 1, 2), (3, 1, 2), (1, 2, 2), (2, 1, 3), (1, 2, 3), (1, 3, 3)]
The code uses a lambda expression and the sorted function in Python to sort a list of 3-D points by any given order string.
You can sort a list of 3-D points by any given order string using a lambda expression and Python sorted function. Here's an example with the input you provided:
```python
points = [(2, 1, 2), (2, 1, 3), (1, 2, 3), (1, 2, 2), (3, 1, 2), (3, 3, 1), (2, 3, 1), (1, 3, 3), (2, 4, 1)]
def sort_points(points, order):
order_map = {'x': 0, 'y': 1, 'z': 2}
order_indices = [order_map[char] for char in order]
return sorted(points, key=lambda point: (point[order_indices[0]], point[order_indices[1]], point[order_indices[2]]))
sorted_xyz = sort_points(points, "xyz")
sorted_zyx = sort_points(points, "zyx")
print("Original:", points)
print("Sorted by xyz:", sorted_xyz)
print("Sorted by zyx:", sorted_zyx)
```
This code defines a function `sort_points` that takes a list of points and an order string. It uses a dictionary to map the order characters to their corresponding indices and then sorts the points using the `sorted` function and a lambda expression that takes the points' coordinates in the desired order.
Learn more about coordinates here;
https://brainly.com/question/16634867
#SPJ11
malware attempts to ______.
Answer:
Many things
Explanation:
Malware attempts to compromise the security and functionality of computer systems or networks.
The specific goals and actions of malware can vary widely, they could seek access to files, passwords, softwares, replicate, steal sensitive information.
the program reads the input files ""cosc485_p1_dfa.txt"" and ""cosc485_p1_stringsdfa.txt"" to collect the following information: i. the information of the dfa in the file ""cosc485_p1_dfa.txt""
The program is designed to read the input files "cosc485_p1_dfa.txt" and "cosc485_p1_stringsdfa.txt" in order to collect information about a deterministic finite automaton (DFA).
Specifically, the program will extract the information about the DFA from "cosc485_p1_dfa.txt". This includes the number of states, the alphabet, the transition function, the start state, and the set of accept states.
The input file "cosc485_p1_stringsdfa.txt" contains a list of strings that the DFA will process. The program will use this file to test whether each string is accepted or rejected by the DFA.The information extracted from "cosc485_p1_dfa.txt" will be used to construct the DFA in memory. The program will then use the transition function and start state to process each string in "cosc485_p1_stringsdfa.txt" and determine whether it is accepted or rejected by the DFA. If a string is accepted, the program will output "yes", otherwise it will output "no".In summary, the program uses the input files "cosc485_p1_dfa.txt" and "cosc485_p1_stringsdfa.txt" to extract information about a DFA and to test whether a list of strings are accepted or rejected by the DFA.Know more about the deterministic finite automaton (DFA).
https://brainly.com/question/30427003
#SPJ11
T/F. you must specify a return data type in the procedure declaration to define the type of variable that is being returned to the calling procedure by the function procedure.
The statement is true. When declaring a function procedure in programming, it is necessary to specify the data type of the variable that will be returned to the calling procedure.
This is done in the procedure declaration, where the programmer defines the function name, any parameters that need to be passed into the function, and the data type of the return value. By specifying the return data type, the programmer is defining the type of variable that will be returned to the calling procedure when the function is executed. This is important because it allows the calling procedure to properly handle and utilize the returned value. Without specifying the return data type, the function may not behave as intended or may not work at all.
learn more about declaring a function here:
https://brainly.com/question/32069765
#SPJ11
A router wishes to send an IP packet to a host on its subnet. It knows the host’s IP address. a) What else must it know?
b) Why must it know it?
c) What message will it broadcast?
d) Which device will respond to this broadcast message?
e).Does a router have to go through the ARP process each time it needs to send a packet to a destination host or to a next-hop router? Explain.
f) Is ARP used to find the destination DLL destination addresses of destination hosts, routers, or both?
g) At what layer does the ARP protocol operate?
h) Why must client PCs use ARP to transmit packets? The answer is not in the text.
a) The router must also know the host's MAC address. e) Yes, the router must go through the ARP process each time. g) ARP protocol operates at the data link layer. h) Client PCs must use ARP to associate the IP address with the MAC address for communication at the data link layer.
To successfully send an IP packet to a host on its subnet, a router must know the host's MAC address as well as its own MAC address.
This is because routers use MAC addresses to deliver packets at the Data Link Layer, which is the layer that deals with communication between devices on the same network segment.
Yes, a router has to go through the ARP process each time it needs to send a packet to a destination host or a next-hop router.
This is because ARP is responsible for mapping IP addresses to MAC addresses, and since MAC addresses are used for communication within a network segment, the router must know the MAC address of the destination host or next-hop router to deliver the packet.
The ARP protocol operates at the Data Link Layer, also known as Layer 2.
This layer deals with communication between devices on the same network segment, and the ARP protocol plays a crucial role in facilitating this communication by mapping IP addresses to MAC addresses.
Client PCs must use ARP to transmit packets because ARP is responsible for mapping IP addresses to MAC addresses, which are used for communication at the Data Link Layer.
Without this mapping, the packets would not be able to reach their intended destination on the network segment, resulting in failed communication.
Therefore, ARP is essential for successful communication between devices on the same network segment.
For more such questions on Router:
https://brainly.com/question/24812743
#SPJ11
Which of the following will ensure optimal system cooling? (Select three.) • Remove the side panel on the case. • Keep the ambient temperature below 80F. • Stack hard drives next to each other. • Leave space between the case and any walls or obstructions. • Bundle cables together and secure unused cables to the case. • Remove unused expansion slot covers to increase air flow.
To ensure optimal system cooling, you should focus on three key actions: Keep the ambient temperature below 80F, Leave space between the case and any walls or obstructions, and Bundle cables together and secure unused cables to the case.
The three key actions are:
Firstly, keep the ambient temperature below 80°F, as this will help maintain a cooler environment for the system to operate efficiently.
Secondly, leave space between the case and any walls or obstructions, allowing for proper airflow and preventing heat buildup.
Lastly, bundle cables together and secure unused cables to the case, which minimizes air resistance and promotes better circulation inside the case. While other methods like removing the side panel or unused expansion slot covers may seem helpful, they can compromise system integrity and dust protection, so it's best to avoid them. cooling system for motor.
Learn more about cooling system at https://brainly.com/question/13258295
#SPJ11
Which operator allows you to create a string that is the result of putting two different strings together, side by side
The operator that allows you to combine two different strings together is the concatenation operator (+).
The concatenation operator (+) in programming allows you to join two strings together to create a single string. It is used to concatenate or append strings. When the + operator is used between two string variables or string literals, it combines them into a new string. This is a common operation in programming when you need to merge or build strings dynamically. The resulting string will contain the characters from both input strings in the order they were combined.
Learn more about operator here;
https://brainly.com/question/29949119
#SPJ11
Wget is a tool that can be used to retrieve HTTP, HTTPS, and FTP files over the Internet. True or False?
The given statement "Wget is a tool that can be used to retrieve HTTP, HTTPS, and FTP files over the Internet" is TRUE because it is a versatile command-line utility that allows users to download files from the Internet using HTTP, HTTPS, and FTP protocols.
It is designed for efficient and reliable downloading, even in unstable network conditions.
Wget can resume interrupted downloads, mirror entire websites, and convert links for offline viewing. As a non-interactive tool, it is ideal for automation tasks and works well in scripts or cron jobs.
In summary, Wget is a powerful and flexible tool for retrieving files over the Internet, supporting multiple protocols and offering a wide range of features to enhance downloading efficiency.
Learn more about FTP at https://brainly.com/question/1564700
#SPJ11
modular theory posits various _____ systems (such as that for language acquisition) seem to have evolved for specific functions.
Modular theory posits various cognitive systems (such as that for language acquisition) seem to have evolved for specific functions.
According to modular theory, the human mind consists of specialized cognitive modules or systems that are dedicated to processing specific types of information or performing specific functions. These modules are thought to have evolved through natural selection to address specific adaptive challenges faced by our ancestors.
In the context of language acquisition, the modular theory suggests that there is a specialized cognitive module specifically dedicated to language processing and acquisition. This language module is believed to have unique characteristics and operates independently from other cognitive systems.
The modular approach argues that these specialized modules have evolved to efficiently process specific types of information, allowing for specialized functions without interference from other cognitive processes. This specialization is thought to enhance cognitive efficiency and effectiveness in performing specific tasks.
Overall, modular theory suggests that various cognitive systems, including language acquisition, have evolved for specific functions and operate as dedicated modules within the human mind.
To learn more about modular theory visit : https://brainly.com/question/11797076
#SPJ11
In one approach to identifying a class's data attributes and methods, the programmer identifies the class's __________.
In one approach to identifying a class's data attributes and methods, the programmer identifies the class's responsibilities or functionalities. Responsibilities represent the tasks or actions that the class is responsible for performing.
By identifying the class's responsibilities, the programmer can determine the necessary data attributes and methods that enable the class to fulfill its role. Data attributes represent the state or characteristics of the class, while methods represent the behaviors or operations that the class can perform. The identification of responsibilities helps in defining the purpose and scope of the class, guiding the design and implementation of the data attributes and methods necessary for the class to fulfill its intended responsibilities.
To learn more about identifying click on the link below:
brainly.com/question/31542138
#SPJ11
write an assembly program that converts all characters of a string to upper case.
Write an assembly program that converts all characters of a string to uppercase.
Here's a step-by-step explanation:
1. Start by initializing the data segment (DS) register with the data segment address, where the string is stored.
2. Load the starting address of the string into the source index (SI) register.
3. Fetch the character at the current SI address.
4. Check if the character is a lowercase letter (ASCII range: 'a' (97) to 'z' (122)). If it is not a lowercase letter, skip to step 7.
5. If the character is a lowercase letter, convert it to uppercase by subtracting 32 from its ASCII value (since the difference between 'A' and 'a' is 32 in ASCII).
6. Store the updated character back at the same memory location.
7. Increment the SI register to move to the next character in the string.
8. Repeat steps 3 to 7 for all characters in the string.
9. End the program.
To know more about string visit:
https://brainly.com/question/30099412
#SPJ11
a program that usually hides in the os tools, so it's almost impossible to detect is called
Answer: A rootkit.
Explanation: A rootkit typically hides the the OS and is able to execute administrative commands without the owner knowing. Which is why it is hard to detect which you have mentioned.
Provide the subnet masks using both formats, (example: /16 and 255.255.0.0), for these common needs:A LAN segment with 200 people that all have a desk PC and an IP phone.
To provide subnet masks for a LAN segment with 200 people that all have a desk PC and an IP phone, we need to determine the number of hosts required. In this case, each person has two devices, so we need a subnet that can accommodate 400 hosts.
Using the /16 format, we need a subnet mask of 255.255.0.0. This provides 16 bits for the network portion of the address and 16 bits for the host portion.
Alternatively, we can use the formula 2^(32-n)-2, where n is the number of bits used for the network portion. In this case, we need at least 9 bits for the host portion (2^9 = 512), so the subnet mask is 255.255.254.0 in the format /23.
Either of these subnet masks will provide enough IP addresses for a LAN segment with 200 people and their devices.
To know more about LAN segment visit:
https://brainly.com/question/31752236
#SPJ11
a thread's block method is invoked automatically by start. true false
A thread's block method is not invoked automatically by the start method.
When working with threads, the start method is responsible for initiating the execution of a thread. It does not automatically invoke a thread's block method. The block method, such as the sleep method, wait method, or join method, needs to be explicitly called within the thread's code to introduce blocking behavior.
The start method in Java, for example, initiates a new thread's execution and invokes the thread's run method. The run method contains the actual code that will be executed by the thread. If blocking behavior is desired within the thread's execution, the appropriate blocking methods should be used explicitly.
For instance, the sleep method can be used to pause the execution of a thread for a specific duration, allowing other threads to execute. The wait method can be used to suspend a thread until it receives a notification from another thread. The join method can be used to wait for the completion of another thread before proceeding.
Learn more about threads here:
https://brainly.com/question/30025002
#SPJ11
the assignment goal is to develop a program in java that keeps track of all your travels incorporating inheritance and polymorphism structures.
Developing travel tracking program using Java with inheritance and polymorphism structures.
What is the goal of the assignment to be developed in Java regarding travel tracking and what structures should be incorporated?The assignment requires you to create a Java program that can keep track of your travels, and it should use inheritance and polymorphism structures. Inheritance refers to the concept where one class inherits the properties and methods of another class, while polymorphism refers to the ability of an object to take on multiple forms.
In the context of this assignment, you could use inheritance to create different classes for different types of travel, such as flights, road trips, and cruises, while using polymorphism to allow these classes to take on different forms based on the specific travel details, such as destination, departure time, and duration.
The program should be able to store and retrieve travel information, as well as perform calculations and display results based on the data provided.
Learn more about polymorphism structures
brainly.com/question/13153596
#SPJ11
during the 1960s, especially in san francisco, rock radio broadcasts shifted from am to fm, in a format known as
During the 1960s, especially in San Francisco, rock radio broadcasts shifted from AM to FM in a format known as "freeform" or "underground."
In the 1960s, FM radio gained popularity as a medium for rock music, particularly in San Francisco and other countercultural hubs. The FM format allowed for longer songs, album tracks, and a more diverse range of music compared to the more commercialized and restricted AM radio. This shift was part of the broader cultural and musical revolution happening during that era, reflecting the desire for alternative and non-mainstream content.
You can learn more about radio broadcasts at
https://brainly.com/question/28483533
#SPJ11
Copy the C-strings a and b into the array cstr Separate them with a space and follow them with an exclamation mark. cstrings.cpp 1 #include 2 #include 3 using namespace std; 4 5 int main() 6 { 7 const int MAX = 1024; 8 char cstr[MAX); 9 const char* a = "Hello"; 10 const char* b = "World"; 11 strcpy(cstr, a); 12 13 cout << "cstr->' « cstr << endl; 14 > CodeCheck Reset
Here's the corrected code to copy the C-strings a and b into the array cstr and separate them with a space, followed by an exclamation mark:
#include <iostream>
#include <cstring>
using namespace std;
int main()
{
const int MAX = 1024;
char cstr[MAX];
const char* a = "Hello";
const char* b = "World";
strcpy(cstr, a);
strcat(cstr, " ");
strcat(cstr, b);
strcat(cstr, "!");
cout << "cstr->" << cstr << endl;
return 0;
}
Note that I added the missing #include <cstring> header and fixed the syntax error on line 8 by replacing the closing square bracket with a closing parenthesis. Additionally, I used strcat() to concatenate the strings together, adding a space between them and an exclamation mark at the end. Finally, I corrected the output statement on line 13 to properly display the contents of the cstr array.
Learn more about C-strings here:
https://brainly.com/question/1435760
#SPJ11
A mobile device communication session using SSL fails, and data is available for viewing by an attacker. Which OWASP Top 10 Mobile Vulnerability category has been made available for exploit?
A. M3 - Insecure communication
B. M4 - Insufficient authentication
C. M5 - Insufficient cryptography
D. M10 - Extraneous Functionality
The OWASP Top 10 Mobile Vulnerability category that has been made available for exploitation in the given scenario is M3 - Insecure communication.
The OWASP Top 10 Mobile Vulnerabilities is a list of the most critical security risks that mobile applications and devices may encounter. In the given scenario, where a mobile device communication session using SSL (Secure Sockets Layer) fails and data becomes accessible to an attacker, it indicates an insecure communication vulnerability.
Insecure communication (M3) refers to vulnerabilities that arise from the improper implementation or configuration of secure communication protocols and encryption mechanisms. SSL is a cryptographic protocol used to secure communication between a client and a server, ensuring data confidentiality and integrity. However, if the SSL implementation is flawed, misconfigured, or outdated, it can result in a security breach, allowing an attacker to intercept and view sensitive data transmitted during the communication session.
In the given scenario, the failure of the SSL communication session indicates that the encryption and security measures have not been correctly implemented or configured, enabling an attacker to exploit the vulnerability and gain access to the transmitted data. It emphasizes the importance of implementing secure communication protocols effectively to protect sensitive information on mobile devices.
Learn more about Insecure communication here:
https://brainly.com/question/32255681
#SPJ11
Which is NOT contained within a public key (digital) certificate? the digital signature of certification authority information identifying the certification authority (issuer) and the subject (owner) O a reference to the algorithm used to sign the certificate O a shared symmetric key
a shared symmetric key is NOT contained within a public key (digital) certificate. Instead, it contains information related to the identity of the certificate owner and the certificate issuer, as well as information needed to verify the authenticity of the certificate.
A public key (digital) certificate is a digitally signed document that contains information about the identity of the certificate owner (subject) and the certificate issuer (certification authority). It also includes a public key that can be used to verify digital signatures and encrypt data. However, one thing that is NOT contained within a public key (digital) certificate is a shared symmetric key.A symmetric key is a type of encryption key that is used for symmetric encryption, where the same key is used for both encryption and decryption of data. This type of encryption is typically used for securing data during transit or storage. However, a public key certificate is used for asymmetric encryption, which uses a public key to encrypt data and a private key to decrypt data. This means that there is no shared symmetric key contained within a public key certificate.Instead, a public key certificate contains information such as the digital signature of the certification authority, information identifying the certification authority (issuer) and the subject (owner), and a reference to the algorithm used to sign the certificate. This information is used to verify the authenticity of the certificate and the identity of the certificate owner.
To know more about symmetric visit:
brainly.com/question/31375565
#SPJ11
Allows Android apps to record loudspeaker data without any privileges. Attackers can eavesdrop on loudspeaker voice conversations between remote mobile users by exploiting the hardware-based motion sensor, i.e., the accelerometer
The ability for Android apps to record loudspeaker data without any privileges is a serious security concern. This vulnerability means that attackers can potentially eavesdrop on conversations between remote mobile users who are using the loudspeaker function.
The attack works by exploiting the hardware-based motion sensor, which is also known as the accelerometer. By using the accelerometer to measure the vibrations caused by the loudspeaker, attackers can record audio data and use it to listen in on conversations. This type of attack is particularly concerning because it can be carried out without the user's knowledge or consent. It is also difficult to detect, as the app can record data in the background without displaying any indicators that it is doing so.
To mitigate this vulnerability, users should be careful when granting permissions to apps that request access to their microphone and other hardware components. Additionally, Android developers should implement stronger security measures to prevent unauthorized access to these features. Overall, this vulnerability highlights the need for stronger security measures in mobile devices and apps. Users and developers alike must work together to ensure that sensitive data remains secure and protected from malicious actors.
Learn more about accelerometer here-
https://brainly.com/question/27960990
#SPJ11
Rewrite each of the following expressions by replacing the index operator[] with the indirection operator(*). a. Num[4] b. Score[7] 14. Which of the following functions does not contain any errors? void printnumint x print(%d, x): return x; } (b) int cube(int s) int s; return(s *s *s): (c) char triplefloat n) return (3*n ): ddouble circumferenceint r return (5.14 *2 * r ): 15.(10 pointsFor a list of numbers entered by the user and terminated by 0,find the sum of the positive number and the sum of the negative numbers 16.20 points Write a function that verifies if a given number exists in an array of floats The function is supposed to return the first position in where the number is encountered. If the given number does not exist, the function returns --1. Then write a program that asks the user to enter an array of floats and calls the function. The prototype of the function should be like: int Searchfloats a[,int n,float number) Example: Consider the following array of floats 2.1 1 1 9 2 -14 17.3 5.9 9 3 4 5 6 0 7 If the number to be searched is 5.4 the function returns --1 If the number to be searched is 9 the function returns 2
To rewrite the expressions using the indirection operator(*), we would need to create pointers to the arrays and then use the pointer to access the array elements. So, the expressions would be:
a. *(Num + 4)
b. *(Score + 7)
Out of the given functions, only the function (a) void printnum(int x) { printf("%d", x); return x; } does not contain any errors.
To find the sum of positive and negative numbers entered by the user, we can use a loop to keep adding positive and negative numbers separately until the user enters 0. Here is an example code:
int num, pos_sum = 0, neg_sum = 0;
do {
scanf("%d", &num);
if(num > 0) {
pos_sum += num;
} else if(num < 0) {
neg_sum += num;
}
} while(num != 0);
To verify if a given number exists in an array of floats, we can use a loop to iterate over the array elements and compare each element with the given number. If a match is found, we can return the index of the element. Otherwise, we return -1. Here is an example code:
int Searchfloats(float a[], int n, float num) {
for(int i = 0; i < n; i++) {
if(a[i] == num) {
return i;
}
}
return -1;
}
To use this function, we can ask the user to enter the size of the array and the array elements, and then call the function to search for a number. Here is an example code:
int main() {
int n, result;
float a[100], num;
printf("Enter the size of the array: ");
scanf("%d", &n);
printf("Enter the array elements: ");
for(int i = 0; i < n; i++) {
scanf("%f", &a[i]);
}
printf("Enter the number to search: ");
scanf("%f", &num);
result = Searchfloats(a, n, num);
if(result == -1) {
printf("Number not found\n");
} else {
printf("Number found at position %d\n", result);
}
return 0;
}
Know more about the array click here:
https://brainly.com/question/30726504
#SPJ11
sparklines are miniature charts in a cell or cell range that illustrate trends and patterns without adding a separate chart object or sheet.
T/F
Sparklines are miniature charts that visually represent trends and patterns within a cell or cell range, eliminating the need for separate chart objects or sheets. This statement is true.
Sparklines are compact and condensed line, column, or win/loss charts that are embedded directly within a cell. They provide a quick and concise way to display trends and variations in data without the need for additional chart elements or dedicated sheets. By representing data in a small space, sparklines allow for a seamless integration within a spreadsheet, making it easier to analyze and interpret information at a glance.
These visual representations enable users to identify patterns, spot outliers, and observe overall trends without the need to refer to larger, more complex charts or graphs. With sparklines, the data becomes more accessible and comprehensible, enhancing the visual storytelling capabilities within a spreadsheet.
learn more about "spreadsheet ":- https://brainly.com/question/26919847
#SPJ11
Combining strings. Assign secretiD with firstName, a space, and lastName. Ex: If firstName is Barry and lastName is Allen, then output is: Barry Allen 1 #include 2 #include 3 using namespace std; 4
5 int main() { 6 string secret ID; 7 string first Name; 8 string lastName; 9 10 cin >> firstName; 11 cin >> lastName; 12 13 * Your solution goes here / 14 15 cout << secretID << endl; 16 return 0; 17 }
Answer:
The solution to combine the strings is:
```cpp
string secretID;
string firstName;
string lastName;
cin >> firstName;
cin >> lastName;
secretID = firstName + " " + lastName + " 1";
cout << secretID << endl;
```
This will concatenate the first name, a space, the last name, and the number 1 to create the secret ID string.
Explanation:
The code takes input from the user for firstName and lastName, concatenates them with a space using the + operator, and assigns the resulting string to secretID. Finally, the code prints the value of secretID to the console.
To combine strings in C++, you can use the concatenation operator "+". In this case, you can assign the concatenated value of firstName, a space, and lastName to secretID. Here's the solution for the given code:
1 #include
2 #include
3 using namespace std;
4
5 int main() {
6 string secretID;
7 string firstName;
8 string lastName;
9
10 cin >> firstName;
11 cin >> lastName;
12
13 secretID = firstName + " " + lastName;
14
15 cout << secretID << endl;
16 return 0;
17 }
Line 13 assigns the concatenated value of firstName, a space, and lastName to secretID. The space is added between the two strings using the string literal " " enclosed in quotes. The final output should display the secretID in the required format.
To know more about concatenation operator visit:
https://brainly.com/question/14308529
#SPJ11
________ is a computer, data, or network site that is designed to be enticing to crackers to detect, deflect, or counteract illegal activity.
A honeypot is a security mechanism used to lure potential attackers or intruders into a trap where their activities can be monitored and analyzed.
A honeypot can be a physical or virtual system, network, or application that appears to be a legitimate target but is actually set up to detect and capture unauthorized access attempts.
Honeypots can provide valuable insights into the tactics, techniques, and tools used by attackers and can help organizations improve their security defenses.
However, honeypots must be carefully designed and deployed to avoid being compromised and used as a launching pad for attacks on other systems. In summary, a honeypot is a proactive defense measure that allows organizations to identify and respond to security threats before they cause damage.
To know more about honeypot visit:
https://brainly.com/question/24182844
#SPJ11
Given a stepper motor with 320 steps per revolution, find the step angle. Group of answer choices: (a) 0.889 (b) 0.5625 (c) 1.125 (d) 1
Therefore, the step angle is 1.125 degrees (option c) when a stepper motor with 320 steps per revolution.
To explain further, the step angle represents the angular displacement of the stepper motor rotor for each step. In this case, the motor has 320 steps per revolution, meaning it takes 320 steps to complete a full 360-degree rotation.
To calculate the step angle, we divide the full rotation angle (360 degrees) by the number of steps per revolution (320 steps):
Step angle = 360 degrees / 320 steps
= 1.125 degrees per step
Therefore, for each step the motor takes, it rotates by 1.125 degrees. This information is important for precise positioning and control of the stepper motor in various applications.
To know more about stepper motor,
https://brainly.com/question/31961806
#SPJ11