The combined effect of the capacitor network can be determined by combining the individual capacitances of the capacitors in either a series or parallel configuration.
What is capacitor?A capacitor is an electrical device used to store energy in the form of an electric field. It consists of two metal plates separated by an insulating material (dielectric) and is commonly used in both AC and DC circuits. The ability of a capacitor to store and release energy quickly can be used to regulate the current in a circuit and to filter out unwanted signals. Capacitors can also be used to smooth out voltage spikes and to provide a reserve power source.
When capacitors are combined in series, the total capacitance of the circuit is the reciprocal of the sum of the reciprocals of each capacitor:
1/Ct = 1/C1 + 1/C2 + 1/C3
In this example, the total capacitance of the circuit is 0.41 UF. When capacitors are combined in parallel, the total capacitance of the circuit is the sum of the individual capacitances:
Ct = C1 + C2 + C3
In this example, the total capacitance of the circuit is 25.94 UF. This combination of capacitors can be used in various circuits to reduce the total capacitance of the network. For example, in low-pass filter circuits, the total capacitance of the network is reduced by using a combination of series and parallel connections of capacitors. This reduces the time constant of the circuit, which can be used to adjust the cut-off frequency of the filter. Additionally, this combination of capacitors can be used in power supply circuits to reduce the ripple voltage, which is the alternating current component of the voltage output.
To know more about capacitor click-
https://brainly.com/question/13578522
#SPJ4
something that orbiys other things in space
Answer: well we all orbit the sun all the planets do so the
SuN
Explanation: two words common sense
Acceleration is the rate ot change of the velacity a -dejdt so it is the slope of the Velocity vs. Time graph Because it is dficult to drag the person in a consistent and reproducible way use the Expression Evakaator under the Special Features menu for this question lick Reset A and type in the hr on z t * t * t " t in the Expression Evaluator Click the Play button and let the simulation run roughly 5 sin ulation seconds before ressing the Pause but use the zoom buttons to a 쪄 the p s they the screen You should see 8 p at s ar l what you got in the previous question, but much smoother Look at the Postion vs Time. Velocity vs Time and Acceleration vs. Time piets h
a) the velocity is zero but the acceleration is negative
When the person is 8 to to the tight of the origin
b) the velocity is zero but the acceleration is positive
c) both the velocity and the acceleration are zero
d) both the velocity and the acceleraton are nonzero
Answer:
a) the body is changing direction,
b)the body must go to the left and the acceleration to the right
c) the movement has not started.
d) all points of the motion
Explanation:
In this exercise you are asked to find in which position you have the following characteristics of the movement
a) The velocity is zero and the acceleration is negative
This is when the body reaches the end of the travel and turns around, in this case the speed is zero and the acceleration has the opposite direction to the movement.
In this case the body moves to the right and the acceleration is to the left, therefore the speed decreases
b) The velocity is zero, but the acceleration is positive
This occurs at the points where the speed is changing direction, specifically for this case the body must go to the left and the acceleration to the right
c) Both are zero
This only occurs where the body is stopped and the movement has not started.
d) both the velocity and the relation are nonzero.
This is at all points of the motion since the velocity is constantly changing as long as there is an acceleration
What kind of reasoning is most often used to form hypotheses?
inductive
deductive
detective
invective
Matter is made of small particles to small to be seen. Which of these best describe evidence of this statement? 1. Tara’s crayons melted when she left them under the sun. 2. Kerris glass of water overflowed when she added ice. 3. Sams basketball expands as he pumps air into it. 4. Stephanie dropped a vase and it broke into pieces.
Answer:
Explanation:
I think the answer is statement no 3.
Hope it helps.
Answer:
1 Tara's crayons melted when she left them under the sun
what is the mystery Greene discussion and why does he say it is something we should all care about
Answer:
The mystery that Greene discusses is that dark energy is causing the expansion of the universe to accelerate. However, this cannot be explained by the laws of Physics.
Explanation:
I majored in Physics
Three joules of work is needed to shift 10 C of charge from one place to another. The potential difference between the places is ______. *
0.3 V
0.5 V
5 V
3 V
Answer:
The potential difference between the places is 0.3 V.
∴ 1st option i.e. 0.3V is the correct option.
Explanation:
Given
Work done W = 3J
Amount of Charge q = 10C
To determine
We need to determine the potential difference V between the places.
The potential difference between the two points can be determined using the formula
Potential Difference (V) = Work Done (W) / Amount of Charge (q)
or
[tex]\:V\:=\:\frac{W}{q}[/tex]
substituting W = 3 and q = 10 in the formula
[tex]V=\frac{3}{10}[/tex]
[tex]V=0.3[/tex] V
Therefore, the potential difference between the places is 0.3 V.
∴ 1st option i.e. 0.3V is the correct option.
Help plz with both I’ll mark brainliest
Please help I don’t get this give me answers please
Answer:
c
Explanation:
What does Neil Degrasse Tyson mean when he says "Wolves domesticated humans" 15000 years ago?
Answer:
Explanation:
fufuu6u
A motorcycle is following a car that is traveling at constant speed on a straight highway. Initially, the car and the motorcycle are both traveling at the same speed of 19.0 m/s , and the distance between them is 52.0 m . After t1 = 3.00 s , the motorcycle starts to accelerate at a rate of 4.00 m/s^2. The motorcycle catches up with the car at some time t2.
Required:
a. How long does it take from the moment when the motorcycle starts to accelerate until it catches up with the car?
b. How far does the motorcycle travel from the moment it starts to accelerate (at time t1) until it catches up with the car (at time t2)?
Answer:
a) 5.09 seconds
b) 107.07 meters
Explanation:
a) As we know
[tex]t_2- t_1 = \sqrt{\frac{2 X}{a} }[/tex]
Substituting the given values we get
[tex]t_2 - t_1 = \sqrt{\frac{2 * 52}{4} } \\t_2 - t_1 = 5.09[/tex]
It takes 5 .09 s for the motorcycle to accelerate until it catches up with the car
b)
[tex]X_{t`2} = v_i \sqrt{\frac{2X}{a} } + 0.5 a\sqrt{\frac{2X}{a} }\\X_{t`2} = (v_i + 0.5 a) \sqrt{\frac{2X}{a} }\\X_{t`2} = ( 19 + 2) \sqrt{\frac{2* 52}{4} }\\X_{t`2} = 21 * 5.09\\X_{t`2} = 107.07[/tex]
Two students on ice skates stand one behind the other. Student 2 pushes student 1 in the back; both students move away from each other. What law of motion is this. (Newton's laws)
Answer:
forcing in act
Explanation:
true or false please help me now.
Calibration graphs can be used to determine unknown concentrations in electrochemical
Answer:
false
Explanation:
a body of mass 20kg initially at rest is subjected to a force of 40N for 1sec calculate the change in kinetic energy showing the solution
Answer:
Change in KE is 40 J
Explanation:
Recall that the impulse exerted on an object equal the change of momentum of the object (ΔP), which in time is defined as the product of the force exerted on it times the time the force was acting:
Change in momentum is: ΔP = F * Δt
In our case,
ΔP = 40 N * 1 sec = 40 N s
Since the object was initially at rest, its initial momentum was zero, and the final momentum should then be 40 N s.
So, the initial KE was 0, and the final (KEf) can be calculated using:
KEf = 1 /(2 m) Pf^2 = 1 / (40) 40^2 = 40 J
So, the change in kinetic energy is:
KEf - KEi = 40 J - 0 j = 40 J
This is the build up of substance such as pesticides in an organism and occurs when an organism absorb a substance at a rate faster than that at which the substance is lost
Answer:
which the substance is lost by catabolism and excretion.
Explanation:
what is borh's postulates for the hydrogen atom
Answer:
An atom has a number of stable orbits in which an electron can reside without the emission of radiant energy. ... Each orbit corresponds, to a certain energy level.
Explanation:
Hope it is helpful....
Canon launch is a 4.0 kg bowling ball with 50 J of kinetic energy what is the bowling ball speed
Answer:
5 m/s
Explanation:
50=1/2*4v^2
4*1/2=2
25*2=50
so...
square rood of 25 is 5
answer 5 m/s
sorry if that didn't make since
Plzz help me with this
I’ll give brainliest
Answer:
B. Objects with more mass have more gravitational force acting upon them.
Answer:
Should be A but it can be B as well.
The force that is applied to other objects from the electric field *
A. ions
B. electric field
C. electric force
D. static charge
Let’s look at a radio-controlled model car. Suppose that at time t1=2.0st1=2.0s the car has components of velocity vx=1.0m/svx=1.0m/s and vy=3.0m/svy=3.0m/s and that at time t2=2.5st2=2.5s the components are vx=4.0m/svx=4.0m/s and vy=3.0m/svy=3.0m/s . Find (a) the components of average acceleration and (b) the magnitude and direction of the average acceleration during this interval.
Answer:
[tex]a_x=6\ \text{m/s}^2[/tex] and [tex]a_y=0\ \text{m/s}^2[/tex]
Magnitude of accleration is [tex]6\ \text{m/s}^2[/tex] and the direction is [tex]0^{\circ}[/tex]
Explanation:
[tex]t_1=2\ \text{s}[/tex]
[tex]v_x=1\ \text{m/s}[/tex]
[tex]v_y=3\ \text{m/s}[/tex]
[tex]t_2=2.5\ \text{s}[/tex]
[tex]v_x=4\ \text{m/s}[/tex]
[tex]v_y=3\ \text{m/s}[/tex]
Average acceleration in the different axes
[tex]a_x=\dfrac{\Delta v_x}{\Delta t}\\\Rightarrow a_x=\dfrac{4-1}{2.5-2}\\\Rightarrow a_x=6\ \text{m/s}^2[/tex]
[tex]a_y=\dfrac{\Delta v_y}{\Delta t}\\\Rightarrow a_y=\dfrac{3-3}{2.5-2}\\\Rightarrow a_y=0\ \text{m/s}^2[/tex]
The components of the acceleration is [tex]a_x=6\ \text{m/s}^2[/tex] and [tex]a_y=0\ \text{m/s}^2[/tex]
The magnitude of acceleration
[tex]a=\sqrt{a_x^2+a_y^2}\\\Rightarrow a=\sqrt{6^2+0^2}\\\Rightarrow a=6\ \text{m/s}^2[/tex]
Direction
[tex]\theta=\tan^{-1}\dfrac{a_y}{a_x}\\\Rightarrow \theta=\tan^{-1}\dfrac{0}{6}\\\Rightarrow \theta=0^{\circ}[/tex]
The magnitude of accleration is [tex]6\ \text{m/s}^2[/tex] and the direction is [tex]0^{\circ}[/tex].
A proud new Jaguar owner drives her car at a speed of 35 m/s into a corner. The coefficients of friction between the road and the tires are 0.70 (static) and 0.40 (kinetic). What is the minimum radius of curvature for the corner in order for the car not to skid
Answer:
178.6 m
Explanation:
Since the car moves in a circular path, it experiences a centripetal force, F = mv²/r where m = mass of car, v = speed of car = 35 m/s and r = radius of curvature of path.
Now, for the car not to skid, this centripetal force must be equal to the frictional force, F' acting in the opposite direction.
So, F' = μN where μ = coefficient of static friction(since the car does not move in this direction) and N = normal force = mg where m = mass of car and g = acceleration due to gravity = 9.8m/s²
F' = μmg
Since F = F'
mv²/r = μmg
dividing both sides by m, we have
v²/r = μg
multiplying both sides by r, we have
v² = μgr
dividing both sides by μg, we have
r = v²/μg
Here we use μ = coefficient of static friction(since the car does not move in this direction) = 0.70. Substituting the other variables into the equation, we have
r = v²/μg
r = (35 m/s)²/(0.70 × 9.8m/s²)
r = 1225 m²/s²/6.86m/s²)
r = 178.6 m
So, the minimum radius of curvature of the corner is 178.6 m
HURRY!!!
I need helppppp!!!
Answer:
ok i think the answer would be C. or B. hope im right
How does the Law of Conservation of Energy (or energy transformation) relate to the home?
Answer:
"The law of conservation of energy states that energy can neither be created nor destroyed - only converted from one form of energy to another. This means that a system always has the same amount of energy, unless it's added from the outside. ... The only way to use energy is to transform energy from one form to another."
Explanation:
Brainliest?
Which of the following is not an example of energy transfer?
A. Riding a bike down a hill.
B. Sliding a table across a floor.
C. Holding a sign in the air.
Answer:
c.holding a sign in the air
Explanation:
because b is kinetic energy and a is also kinetic energy
Galileo
o did not believe friction existed
o believed that friction stopped objects in motion
o believed that friction kept objects in motion
О
assumed that in a frictionless environment objects would never move
Answer:
object would move but it could be difficult to slow down or stop.
HELPPPPP
What can you infer about the strength and direction of forces experienced by the pod and space station when they collided? What evidence from today’s activities supports your inference?
Answer:
In the collision, the strength of the force exerted on the pod is greater than the strength of the force exerted on the space station, but those forces are exerted in opposite directions.
Explanation:
alex often draws his dream house
Answer:
hopefully alex quackity hahhaa
Explanation:
i hope this was free points and not an actual thing
Answer:
cool, cool for alex .....
What is the average speed of an Olympic sprinter that runs 100 m in 9.88 s?
Answer:
speed = 10.1215 m/s
Explanation:
speed = distance / time
speed = 100 / 9.88 = 10.1215 m/s
Thermodynamic Processes
Two moles of a monatomic ideal gas at (5 MPa, 5 L) is expanded isothermally until the volume is doubled (step 1). Then it is cooled isochorically until the pressure is 1 MPa (step 2). The temperature drops in this process. The gas is now compressed isothermally until its volume is back to 5 L, but its pressure is now 2 MPa (step 3). Finally, the gas is heated isochorically to return to the initial state (step 4). (a) Draw the four processes in the pV plane. (b) Find the total work done by the gas.
Answer:
A. Part a is the attachment
B. total work = 10.4kj
Explanation:
[tex]workdone=nRT1ln\frac{Vb}{Va}[/tex]
T1 = constant temperature
nRT1 = PaVa = PbVb
We write equation as
[tex]workdone =(PaVa)ln\frac{Vb}{Va}[/tex]
5ma = Pa, 5L = Va, Vb = 10L(temperature is doubled)
[tex]w1 = workdone =(5mpa*5L)ln\frac{10L}{5L}[/tex]
W1 = 25 ln2
W1 = 25 x 0.693
= 17.327kj
The isochoric expansion has no change in volume. So,
W2 = 0
Isothermal compression
[tex]w3=nRT3ln\frac{Vd}{Vc}[/tex]
T3 = constant temperature
nRT3 = PcVc = PdVd
[tex]workdone=(PcVc)ln\frac{Vd}{Vc}[/tex]
Pc = 1mpa Vc = 10L Vd = 5L
[tex]w3=(1)(10)ln\frac{5L}{10L}[/tex]
= 10x-0.693
= -6.93kj
Isochoric compression has no change in volume. Workdone w4 = 0
Total workdone = w1 + w2 + w3 + w4
= 17.33 + 0 + (-6.93) + 0
= 10.4kj
Plzzz answer this correctly
Answer:
D, the acceleration of A is twice that of b.
Explanation: in four seconds b got to ten, in two seconds a got to 20. Going 10m/s faster in half the time is going twice the acceleration
Formula One racers speed up much more quickly than normal passenger vehicles, and they also can stop in a much shorter distance. A Formula One racer traveling at 90m/s can stop in a distance of 110m. What is the magnitude of the car's acceleration as it slows during braking?
Answer:
The magnitude of the car's acceleration as it slows during braking is 36.81 m/s²
Explanation:
From the question, the given values are as follows:
Initial velocity, u = 90 m/s
final velocity, v = 0 m/s
distance, s = 110 m
acceleration, a = ?
Using the equation of motion, v² = u² + 2as
(90)² + 2 * 110 * a = 0
8100 + 220a = 0
220a = -8100
a = -8100/220
a = -36.81 m/s²
The value for acceleration is negative showing that car is decelerating to a stop. The magnitude of the car's acceleration as it slows during braking is therefore 36.81 m/s²