A buffer solution with pH around 9 may contain which of the following? a. Hydrochloric acid b. Acetic acid c. Sodium hydroxide d. ammonia

The mass of water that vaporizes is approximately 0.000163 kg, or 0.163 g.

we can use the heat gained by the mercury to calculate the amount of water that vaporizes. The heat gained by the mercury is equal to the heat lost by the water, so we can use the equation:

Q = m·C·ΔT

where Q is the heat gained or lost, m is the mass of the substance, C is the specific heat capacity of the substance, and ΔT is the change in temperature.

For the water:

Q = (0.111 kg) x (4.18 J/g°C) x (-81.6°C) = -368 J

Note that the heat lost by the water is negative because it is losing heat to the environment.

For the mercury:

Q = (4.14 kg) x (0.14 J/g°C) x (217°C - 100°C) = 1,246 J

where the specific heat capacity of mercury is 0.14 J/g°C.

Since the heat gained by the mercury is equal to the heat lost by the water, we can set the two equations equal to each other and solve for the mass of water that vaporizes:

Q_water = Q_mercury

-368 J = m_water·L_vaporization

m_water = -368 J / (2.26 x 10^6 J/kg) ≈ 0.000163 kg

where the specific latent heat of vaporization of water is 2.26 x 10^6 J/kg.

Therefore, the mass of water that vaporizes is approximately 0.000163 kg, or 0.163 g.

To know more about heat capacity gained refer here

https://brainly.com/question/28302909#

#SPJ11

Any material that can take in a pair of non-bonding electrons is said to be a Lewis acid. Hydrogen ion, or H+, is an excellent illustration of a Lewis acid.

NaBH₄ (sodium borohydride) reacts selectively with carbonyl compounds and not with water or alcohol solvents. After NaBH₄ donates a hydride (H-) to a carbonyl compound, the resulting products are BH3 (borane) Hydrogen and an alkoxide base (RO-).
The Lewis Acid/Base reaction occurs between these two products, where BH₃ acts as a Lewis Acid (electron pair acceptor) and the alkoxide base (RO-) acts as a Lewis Base (electron pair donor). The reaction can be represented as:
BH₃ + RO- → R-O-BH₃
In this reaction, the lone pair of electrons on the oxygen atom in the alkoxide base forms a coordinate covalent bond with the boron atom in BH₃. This results in the formation of an alkoxide-borane complex.

A Lewis acid/base reaction is one that involves the acquisition or loss of an electron pair.

An acceptor of electron pairs is Lewis acid.

Lewis base: a donor of electron pairs.

This reaction is a Lewis acid/base reaction because it includes the loss and gain of electrons.

I2 is a Lewis acid since it is accepting electrons.

Learn more about Lewis acid/base reaction here

https://brainly.com/question/15220646

#SPJ11

The volume of 6 M HCl required to achieve a 150 mL solution of 0.4 M HCl is 10 mL (0 decimal places).

To calculate the volume of 6 M HCl required to achieve a 150 mL solution of 0.4 M HCl, you can use the dilution formula:

M1V1 = M2V2

where M1 and V1 are the initial molarity and initial volume of the concentrated solution (6 M HCl), and M2 and V2 are the final molarity and final volume of the diluted solution (0.4 M HCl and 150 mL).

Rearrange the formula to solve for V1:

V1 = (M2V2) / M1

Plug in the given values:

V1 = (0.4 M × 150 mL) / 6 M

V1 = (60 mL) / 6 M

V1 = 10 mL

So, the volume of 6 M HCl required to achieve a 150 mL solution of 0.4 M HCl is 10 mL (0 decimal places).

Learn more about HCl : https://brainly.com/question/30900251

#SPJ11

You would need 1.35 moles of barium hydroxide to prepare a 0.500 L solution with a concentration of 2.70 M.

To determine the number of moles of barium hydroxide (Ba(OH)2) needed to prepare a 0.500 L solution with a concentration of 2.70 M, we can use the formula for molarity:

Molarity (M) = Number of moles of solute / Volume of solution (in liters)

Rearranging the formula, we can calculate the number of moles of solute:

Number of moles of solute = Molarity (M) * Volume of solution (in liters)

Given that the volume of the solution is 0.500 L and the concentration is 2.70 M, we substitute these values into the formula:

Number of moles of Ba(OH)2 = 2.70 mol/L * 0.500 L

Number of moles of Ba(OH)2 = 1.35 moles

In summary, the calculation involves multiplying the molarity of the solution by the volume of the solution in liters to obtain the number of moles of the solute. In this case, a 0.500 L solution with a concentration of 2.70 M requires 1.35 moles of barium hydroxide.

Learn more about moles here:

https://brainly.com/question/20486415

#SPJ11

To calculate the equilibrium constant (K) for the given reaction, we need to use the Nernst equation and the standard reduction potentials for the half-reactions involved.

The half-reactions involved in the given reaction are:

1. Zn(s) ⇌ Zn^2+(aq) + 2e-   (Reduction half-reaction)

2. Fe^2+(aq) + 2e- ⇌ Fe(s)   (Oxidation half-reaction)

The standard reduction potentials for these half-reactions are as follows:

E°(Zn^2+(aq) + 2e- ⇌ Zn(s)) = -0.76 V

E°(Fe^2+(aq) + 2e- ⇌ Fe(s)) = -0.44 V

Now, we can use the Nernst equation:

Ecell = E°cell - (0.0592 V / n) * log(Q)

where:

Ecell is the cell potential

E°cell is the standard cell potential

Q is the reaction quotient

n is the number of electrons transferred

For the given reaction, n = 2 because two electrons are transferred.

Let's calculate the cell potential (Ecell):

Ecell = E°(Fe^2+(aq) + 2e- ⇌ Fe(s)) - E°(Zn^2+(aq) + 2e- ⇌ Zn(s))

     = (-0.44 V) - (-0.76 V)

     = 0.32 V

Since the reaction is at equilibrium, Ecell = 0. Therefore:

0 = E°cell - (0.0592 V / n) * log(K)

Rearranging the equation:

(0.0592 V / n) * log(K) = E°cell

Now, substituting the values:

(0.0592 V / 2) * log(K) = 0.32 V

0.0296 V * log(K) = 0.32 V

log(K) = 0.32 V / 0.0296 V

log(K) = 10.811

Taking the antilog of both sides:

K = 10^10.811

K ≈ 6.992 × 10^10

Therefore, the equilibrium constant for the given reaction is approximately 6.992 × 10^10.

To know more about equilibrium constant (K) refer here

https://brainly.com/question/29892853#

#SPJ11

The passage of 1 mol H2 requires 2 Faradays.

The balanced equation for the electrolysis of water is:
2H2O → 2H2 + O2
For every mole of H2 produced, two moles of electrons are needed to reduce the two protons in each H2O molecule to H2 gas. One Faraday is equal to the amount of electrical charge (i.e., the number of electrons) needed to reduce or oxidize one mole of a substance during an electrolytic reaction. Therefore, for the reduction of one mole of H2O to produce one mole of H2, two Faradays are required.
To find out how many Faradays are required for the passage of 1 mol H2, we'll use the following terms and concepts:
1. Mole (mol): A unit of measurement for the amount of substance, equal to 6.022 x 10^23 particles (Avogadro's number).
2. Hydrogen (H2): A diatomic molecule composed of two hydrogen atoms.
3. Faraday: A unit of electric charge, equal to the charge of 1 mole of electrons, approximately 96,485 Coulombs.
Now let's calculate how many Faradays are needed:
Step 1: Determine the moles of electrons involved in the reaction.
For the formation of H2, the balanced half-reaction is: 2H+ + 2e- → H2
This means that for every 1 mol of H2, 2 moles of electrons (2e-) are involved in the reaction.
Step 2: Calculate the required Faradays.
1 mol of electrons = 1 Faraday (96,485 Coulombs)
So, for 2 moles of electrons, we need 2 Faradays.
Therefore, the passage of 1 mol H2 requires 2 Faradays.

For more such questions on Faradays , Visit:

https://brainly.com/question/31604460

#SPJ11

1 mol H2 requires passage of 2 Faradays.

1. According to Faraday's law of electrolysis, the amount of substance produced or consumed at an electrode during electrolysis is proportional to the charge passed through the cell.
2. For the production of 1 mol H2, we must consider the balanced half-reaction for the reduction of hydrogen ions to form hydrogen gas: 2H+ + 2e- → H2
3. From this half-reaction, we see that 2 moles of electrons (2e-) are required to produce 1 mol of hydrogen gas (H2).
4. Since 1 Faraday is equal to the charge of 1 mole of electrons (approximately 96,485 C/mol), we can conclude that 1 mol H2 requires the passage of 2 Faradays, as 2 moles of electrons are needed for the production of 1 mol H2.

To know more about Faraday's law of electrolysis click here:

https://brainly.com/question/17012638

#SPJ11

We can calculate the pH using the formula pH = -log10[H+]. Therefore, pH = -log10(2.96 x 10^-5), resulting in a pH of approximately 4.53. Your answer: 4.53.                                                                                                                                                  

The pH of a 0.025 M solution of HClO can be calculated using the Ka value and the equation for the acid dissociation constant. HClO ⇌ H+ + ClO-. First, calculate the concentration of H+ and ClO- at equilibrium using the Ka value:                              
Ka = [H+][ClO-]/[HClO]. Rearranging this equation and plugging in the given values, we get [H+][ClO-] = 8.75 x 10^-10. Since the initial concentration of HClO is 0.025 M, we can assume that the [H+] and [ClO-] concentrations are much smaller and can be neglected in comparison.                                                                                                                             Therefore, [H+] = [ClO-] = √(8.75 x 10^-10) = 2.96 x 10^-5 M. Using the equation for pH = -log[H+], we can calculate the pH to be 4.53. Therefore, the correct answer is 4.53.

Learn more about pH here:
https://brainly.com/question/2288405

#SPJ11

To synthesize trans-1-phenylpent-2-ene, use a Lindlar's catalyst and H2 to reduce an alkynylbenzene intermediate.

To obtain trans-1-phenylpent-2-ene, start with an alkynylbenzene (PhCH2-C≡C-H) as the precursor.

The target compound is an alkene, so you'll need to perform a partial reduction of the triple bond.

To achieve this, use a Lindlar's catalyst (a palladium-based catalyst) and hydrogen gas ([tex]H_2[/tex]) for the reaction.

The Lindlar's catalyst selectively reduces alkynes to cis-alkenes (Z configuration), which is the desired product in this case.

By performing this partial reduction, you will successfully synthesize trans-1-phenylpent-2-ene from the alkynylbenzene precursor.

For more such questions on Lindlar's catalyst, click on:

https://brainly.com/question/14464125

#SPJ11

Utilise a Lindlar's catalyst and H2 to reduce an intermediate of alkynylbenzene to produce trans-1-phenylpent-2-ene for the given reagent.

The precursor for trans-1-phenylpent-2-ene is an alkynylbenzene (PhCH2-C-C-H) in case of a reagent.

Since the target substance is an alkene, you must partially reduce the triple bond.

Use a Lindlar's catalyst—a palladium-based catalyst—and hydrogen gas () for the reaction to accomplish this.

The intended product in this instance is cis-alkenes (Z configuration), which are selectively reduced to by the Lindlar's catalyst from alkynes.

You can successfully make trans-1-phenylpent-2-ene from the alkynylbenzene precursor by carrying out this partial reduction.

Learn more about reagent here:

https://brainly.com/question/31283796

#SPJ11

To calculate the mole fraction of solute (NaCl), we need to determine the number of moles of NaCl and the number of moles of water in the solution.

Given:

Mass of NaCl = 5.85 g

Mass of water = 90 g

To find the number of moles of NaCl, we divide the mass of NaCl by its molar mass:

Molar mass of NaCl = 22.99 g/mol (atomic mass of Na) + 35.45 g/mol (atomic mass of Cl) = 58.44 g/mol

Number of moles of NaCl = 5.85 g / 58.44 g/mol

To find the number of moles of water, we divide the mass of water by its molar mass:

Molar mass of water (H2O) = 1.01 g/mol (atomic mass of H) + 16.00 g/mol (atomic mass of O) = 18.01 g/mol

Number of moles of water = 90 g / 18.01 g/mol

Now we can calculate the mole fraction of NaCl:

Mole fraction of NaCl = Moles of NaCl / (Moles of NaCl + Moles of water)

Mole fraction of NaCl = (5.85 g / 58.44 g/mol) / [(5.85 g / 58.44 g/mol) + (90 g / 18.01 g/mol)]

Calculating the expression, we find:

Mole fraction of NaCl ≈ 0.0197

Therefore, the mole fraction of solute (NaCl) is approximately 0.0197, which is closest to option A: 0.0196.

To know more about fraction refer here

https://brainly.com/question/10354322#

#SPJ11

To rank the four solutions in order of conductivity from lowest to highest, The solutions can be ranked in order of conductivity [Cu(NH₃)2Cl₂] < Na₂[PtCl₆] < [Co(NH₃)₆]Cl₃ < KNO₃

KNO₃ dissociates into K+ and NO₃⁻ ions in water. Both K+ and NO₃⁻ ions are capable of conducting electricity. The solution will have moderate conductivity.The [Co(NH₃)6]₃⁺ ion is a complex ion and does not readily conduct electricity. However, the Cl⁻ ions are capable of conducting electricity. Na2[PtCl6] dissociates into 2 Na⁺ ions and [PtCl₆]₂⁻complex ions in water.The solution will have lower conductivity compared to KNO₃ and [Co(NH₃)₆]Cl₃. [Cu(NH₃)₂Cl₂] dissociates into [Cu(NH₃)₂]₂⁺ and Cl⁻ions in water.

The solutions can be ranked in order of conductivity

[Cu(NH₃)₂Cl₂] < Na₂[PtCl₆] < [Co(NH₃)₆]Cl₃ < KNO₃

To learn more about conductivity

brainly.com/question/21496559

#SPJ4

To determine whether each pair of compounds, a and b, could be differentiated by 13C NMR, we need to consider their distinct carbon environments.

13C NMR spectroscopy is a technique used to identify the number of unique carbon atoms in a molecule by analyzing the chemical shifts of carbon nuclei.

If the two compounds have different carbon environments (i.e., they are bonded to different types of atoms or groups), then they will produce distinct 13C NMR spectra. This means the compounds could be differentiated using 13C NMR spectroscopy.

However, if the two compounds have identical carbon environments, their 13C NMR spectra will be the same, making it difficult to differentiate them using this technique alone. In such cases, additional spectroscopic methods might be necessary to distinguish the compounds.

To know more about the 13C NMR spectroscopy, click below.

https://brainly.com/question/13130554

#SPJ11

The charge of the complex ion in [Zn(H2O)3Cl]Cl is 2+. Correct answer is option D.

In the complex ion [Zn(H2O)3Cl]Cl, the zinc ion (Zn) is surrounded by three water molecules and one chloride ion (Cl). To determine the charge of the complex ion, we need to consider the charge of each of its constituent ions. Zinc typically has a charge of 2+, while chloride has a charge of 1-. However, the water molecules are neutral and do not contribute to the overall charge of the complex ion.

Since there is only one chloride ion in the complex, the charge of the complex ion can be determined by subtracting the charge of the chloride ion from the charge of the zinc ion. Therefore, the charge of the complex ion is 1+, which is option D.

More on complex ion: https://brainly.com/question/30022931

#SPJ11

The equilibrium constant for the reaction 2NO(g) + O₂(g) ⇌ 2NO₂(g) at 25°C is 1.0 x 10²⁹, and the equilibrium constant for the reaction 2H₂S(g) ⇌ 2H₂(g) + S₂(g) at 25°C is 6.7 x 10⁻²⁴.

The equilibrium constant (K) can be calculated from the standard free energy change (ΔG°) using the equation: ΔG° = -RT ln K, where R is the gas constant (8.314 J/mol*K) and T is temperature in Kelvin (298 K at 25°C).

For the reaction 2NO(g) + O₂(g) ⇌ 2NO₂(g), we have;

ΔG°f,NO(g) = 87.6 kJ/mol

ΔG°f,NO₂(g) = 51.3 kJ/mol

ΔG°rxn = ΣΔG°f(products) - ΣΔG°f(reactants)

ΔG°rxn = 2ΔG°f(NO2(g)) - 2ΔG°f(NO(g)) - ΔG°f(O2(g))

ΔG°rxn = 2(51.3 kJ/mol) - 2(87.6 kJ/mol) - 0 kJ/mol

ΔG°rxn = -174.6 kJ/mol

Now, we can calculate the equilibrium constant;

ΔG°rxn = -RT ln K

-174.6 kJ/mol = -(8.314 J/mol×K)(298 K) ln K

ln K = 68.4

K = [tex]e^{68.4}[/tex]

K = 1.0 x 10²⁹

Therefore, the equilibrium constant for the reaction 2NO(g) + O₂(g) ⇌ 2NO₂(g) at 25°C is 1.0 x 10²⁹.

For the reaction 2H₂S(g) ⇌ 2H₂(g) + S₂(g), we have:

ΔG°f,H₂S(g) = -33.4 kJ/mol

ΔG°f,S₂(g) = 79.7 kJ/mol

ΔG°rxn = ΣΔG°f(products) - ΣΔG°f(reactants)

ΔG°rxn = 2ΔG°f(H₂(g)) + ΔG°f(S₂(g)) - 2ΔG°f(H₂S(g))

ΔG°rxn = 2(0 kJ/mol) + 79.7 kJ/mol - 2(-33.4 kJ/mol)

ΔG°rxn = 146.5 kJ/mol

Now, we can calculate the equilibrium constant;

ΔG°rxn = -RT ln K

146.5 kJ/mol = -(8.314 J/mol×K)(298 K) ln K

ln K = -54.1

K = [tex]e^{54.1}[/tex]

K = 6.7 x 10⁻²⁴

Therefore, the equilibrium constant for the reaction 2H₂S(g) ⇌ 2H₂(g) + S₂(g) at 25°C is 6.7 x 10⁻²⁴.

To know more about standard free energy change here

https://brainly.com/question/15876696

#SPJ4

The air in the tire has likely experienced a change in temperature. When the temperature of a gas changes, its pressure changes as well, according to the ideal gas law (PV = nRT), where P is pressure, V is volume, n is the number of gas molecules, R is a constant, and T is temperature. As the tire cooled down overnight, the temperature of the air inside the tire decreased, causing the pressure to drop. When the tire was driven to the gas station, the friction of the tire against the road warmed up the air inside the tire, increasing the temperature and causing the pressure to return to its normal value. It's important to note that if a tire repeatedly loses and gains pressure, it may indicate a slow leak and should be checked by a professional.

The common substance that has the highest density is mercury at 13.6 g/cm³. So the correct option is (D).

Mercury has a density of 13.53 g/cm³, which is much higher than the densities of iron, table salt, ethanol, and aluminum. This means that a given volume of mercury will weigh much more than the same volume of any of the other substances listed.
The common substance with the highest density among the given options is D) mercury.
A) Iron: Density = 7.87 g/cm³
B) Table salt: Density = 2.16 g/cm³
C) Ethanol: Density = 0.789 g/cm³
D) Mercury: Density = 13.6 g/cm³
E) Aluminum: Density = 2.7 g/cm³
Comparing the densities of these substances, mercury has the highest density at 13.6 g/cm³. So the correct option is (D).

For more such questions on density , Visit:

https://brainly.com/question/1354972

#SPJ11

Hi!

The common substance with the highest density among the options provided is D) mercury. Density refers to the mass of a substance per unit volume, and mercury is known for having a higher density compared to the other substances listed.

To know more about Mercury, click here:

brainly.com/question/30914360

#SPJ11

The correct answer is option e. (NH4+), (Cr3+), and (O2-) are the ions present in (NH4)2Cr2O7.

In (NH4)2Cr2O7, the ammonium ion (NH4+) is formed by the combination of a nitrogen ion (N3-) and four hydrogen ions (H+). The chromium ion (Cr3+) is present as a trivalent cation. The chromate ion (Cr2O72-) is formed by the combination of two chromium ions (Cr3+) and seven oxygen ions (O2-).

Therefore, (NH4)2Cr2O7 consists of two ammonium ions (NH4+), two chromium ions (Cr3+), and seven oxygen ions (O2-). The overall compound is electrically neutral because the charges of the ions balance each other out.

It is important to note that option c. is not a valid answer as it is incomplete. The complete answer should include the specific ions present in the compound.

 To  learn  more  about oxygen click here:brainly.com/question/13905823

#SPJ11

The order of the given vanadium species in order of strongest to the weakest oxidizing agent is:

VO₄³- > [V(H2O)₆]³+ > [V(H2O)₆]²+ > [V(H2O)₄]²+

A stronger oxidizing agent has a higher reduction potential because it can take electrons more readily.

The VO₄³-  ion, which has the highest oxidation state of +5, has the greatest propensity to receive electrons and be reduced to a lower oxidation state, which is why it is arranged in this particular order.

The oxidation state of the  [V(H2O)₆]³+ ion is +3, which is also fairly high, making it a potent oxidizing agent. The [V(H2O)₆]²+ ion is a weaker oxidizing agent than the [V(H2O)₆]³+ ion due to its slightly lower oxidation state of +2. The [V(H2O)₄]²+ ion is the weakest oxidizing agent among the species listed and has the lowest oxidation state of +2.

For more question on oxidizing agent click on

https://brainly.com/question/29545518

#SPJ11

COMPLETE QUESTION

Consider the following vanadium species. Arrange them in order of strongest to weakest oxidizing agent.

[V(H2O)6]^3+

[V[H2O)4]^2+

[V(H2O)6]^2+

VO4^3-

The order of the vanadium species from strongest to weakest oxidizing agent is as follows: VO_{4}^3- > [V(H_{2}O)_{6}]^3+ > [V(H_{2}O)_{6}]^2+ > [V(H_{2}O)_{4}]^2+.

The reason for this order is based on the oxidation state of the vanadium ion. In VO_{4}^3-, the vanadium is in its highest oxidation state, +5, and has four oxygen atoms attached to it. This makes it a very strong oxidizing agent as it has a high affinity for electrons.
In [V(H2O)6]^3+, the vanadium is in the +3 oxidation state and has six water molecules attached to it. It is still a strong oxidizing agent, but not as strong as VO4^3-.
In [V(H2O)6]^2+, the vanadium is in the +2 oxidation state and has six water molecules attached to it. It is weaker as an oxidizing agent compared to [V(H2O)6]^3+.
In [V(H2O)4]^2+, the vanadium is in the +2 oxidation state and has only four water molecules attached to it. It is the weakest oxidizing agent out of the four vanadium species listed.

learn more about oxidation state Refer: https://brainly.com/question/31688257

#SPJ11

complete question:

Consider the following vanadium species. Arrange them in order of strongest to weakest oxidizing agent.

[V(H2O)6]^3+

[V[H2O)4]^2+

[V(H2O)6]^2+

VO4^3-

The decay constant for the element X is 6.931 yr⁻¹. 0.1 years is the half-life Option E is correct.

The formula for calculating half-life is:
[tex]t\frac{1}{2} =ln\frac{2}{A}[/tex]
Where t1/2 is the half-life, ln is the natural logarithm, and λ is the decay constant.

A half of existence is the duration required for something to reduce in size by half. The phrase is most frequently used in reference to radioactive decay, which takes place as unstable atomic particles weaken. There are 29 known variables that can operate in this way.

The amount of time needed for half of the dangerous nuclei to go through their process of decay is known as the half-life. Every chemical has a unique half-life. Since carbon-10, for instance, has a half-life of only 19 seconds, it is impossible for this isotope to be found in nature.
Substituting the given value of decay constant for element X, we get:
t1/2 = ln(2) / 6.931 yr⁻¹
Using a calculator, we get:
t1/2 ≈ 0.1 years
Therefore, the answer is E) 0.1 years.

Learn more about half-life here

https://brainly.com/question/16387602

#SPJ11

the reason for adding vinegar, which is mostly water and approximately 5% acetic acid (CH3COOH), to a reaction is to create an acidic environment.

This is important for certain chemical reactions because it helps to control the pH and improve the efficiency of the reaction. Acetic acid acts as a weak acid, meaning it can donate a hydrogen ion (H+) to the solution, this increase in H+ ions lowers the pH, making the environment more acidic. Acidic conditions can be necessary for specific reactions, such as those involving enzymes or catalysts that require a particular pH range to function optimally.

Additionally, adding vinegar can help drive certain reactions forward by providing a source of protons, which are needed in various acid-base reactions. Furthermore, the use of vinegar is convenient, safe, and cost-effective, making it an ideal choice for household or educational purposes. In summary, vinegar is added to reactions to create an acidic environment that is beneficial for various chemical processes, ensuring efficient and successful outcomes.

To learn more about vinegar here:

https://brainly.com/question/4239583

#SPJ11

The order of increasing [H3O+] is: [tex]Ba(OH)_{2}[/tex] < [tex]C_{2} H_{5} N[/tex] < [tex]HNO_{2}[/tex] < HClO < HI.

To rank the following substances in order of increasing [[tex]H_{3}O[/tex]+], we need to consider their acid-base properties and the extent to which they dissociate in water to release [tex]H_{3}O[/tex]+ ions:

[tex]Ba(OH)_{2}[/tex]:

[tex]Ba(OH)_{2}[/tex] is a strong base that dissociates completely in water to release two OH- ions per formula unit, but it does not produce any[tex]H_{3}O[/tex]+ ions. Therefore, its [[tex]H_{3}O[/tex]+] is negligible and it would have the lowest value.

[tex]C_{2} H_{5} N[/tex]:

[tex]C_{2} H_{5} N[/tex] is a weak base that partially dissociates in water to produce some [tex]H_{3}O[/tex]+ and C5H5NH+ ions. However, its dissociation constant is relatively small, so its [[tex]H_{3}O[/tex]+] is expected to be low compared to the other acids in the list.

HClO:

HClO is a strong acid that dissociates completely in water to produce [tex]H_{3}O[/tex]+ and ClO- ions. Since it is a strong acid, its [[tex]H_{3}O[/tex]+] is expected to be relatively high.

[tex]HNO_{2}[/tex]:

[tex]HNO_{2}[/tex] is a weak acid that partially dissociates in water to produce some [tex]H_{3}O[/tex]+ and [tex]NO_{2}[/tex]- ions. However, its dissociation constant is relatively small, so its [[tex]H_{3}O[/tex]+] is expected to be lower than HClO.

HI:

HI is a strong acid that dissociates completely in water to produce [tex]H_{3}O[/tex]+ and I- ions. Since it is a strong acid, its [[tex]H_{3}O[/tex]+] is expected to be the highest among the given substances.

Therefore, the order of increasing [[tex]H_{3}O[/tex]+] is:[tex]Ba(OH)_{2}[/tex] < [tex]C_{2} H_{5} N[/tex] <[tex]HNO_{2}[/tex] < HClO < HI.

Know more about  weak base   here:

https://brainly.com/question/31419133

#SPJ11

To determine the number of moles of Cl in a 27.8-gram sample of CFCl3, we need to use the molar mass of CFCl3 and the molar mass of Cl to calculate the moles of Cl present.

The molar mass of [tex]CFCl_3[/tex] (chlorofluorocarbon-11 or CFC-11) can be calculated by summing the atomic masses of its constituent elements. Carbon (C) has a molar mass of approximately 12.01 g/mol, fluorine (F) has a molar mass of about 19.00 g/mol, and chlorine (Cl) has a molar mass of around 35.45 g/mol.

The molar mass of [tex]CFCl_3[/tex] is thus:

(1 × molar mass of C) + (1 × molar mass of F) + (3 × molar mass of Cl)

= (1 × 12.01 g/mol) + (1 × 19.00 g/mol) + (3 × 35.45 g/mol)

= 12.01 g/mol + 19.00 g/mol + 106.35 g/mol

≈ 137.36 g/mol

Now we can use the molar mass of Cl (35.45 g/mol) to calculate the moles of Cl in the given 27.8-gram sample of [tex]CFCl_3[/tex] using the formula:

moles of Cl = mass of sample (g) / molar mass of Cl (g/mol)

Substituting the values, we have:

moles of Cl = 27.8 g / 35.45 g/mol

≈ 0.784 mol

Therefore, there are approximately 0.784 moles of Cl in the 27.8-gram sample of [tex]CFCl_3[/tex].

Learn more about molar mass here:

https://brainly.com/question/30640134

#SPJ11

D-mannose and D-galactose are epimers of D-glucose, while D-mannose and D-galactose are diastereomers.

Epimers are stereoisomers that share the same configuration at all other chiral centres but differ in one particular chiral center's arrangement. Because the C2 chiral centre of D-mannose and D-galactose differs from the other chiral centres, which all have the same configuration, they are both epimers of D-glucose.

Contrarily, stereoisomers that are not mirror images or enantiomers but instead differ in their configuration at two or more chiral centres are known as stereoisomers. D-mannose and D-galactose are not diastereomers because their main structural difference is at the C2 chiral centre.

Enantiomers are mirror images of one another and have the opposite chiral centre configuration. Since D-mannose, D-galactose, and D-glucose share the same configuration at some chiral centres, they are not enantiomers.

Learn more about D-galactose here:

https://brainly.com/question/30761014

#SPJ11

Iodoacetic acid most likely has the lower boiling point compared to chloroacetic acid. This is because iodoacetic acid has a larger and more polarizable iodine atom compared to the smaller and less polarizable chlorine atom in chloroacetic acid. The larger size and greater polarizability of the iodine atom results in weaker intermolecular forces, which results in a lower boiling point for iodoacetic acid.

learn more about iodoacetic acid.

https://brainly.in/question/12090983?referrer=searchResults

#SPJ11

For an endothermic forward reaction (ΔH_forward > 0), the activation energy of the reverse reaction will be equal to: C. Ea of the forward reaction minus ΔH_forward.

In an endothermic reaction, the reactants have a lower energy than the products. The reverse reaction, which involves the conversion of products back into reactants, is therefore exothermic, meaning it releases energy. The activation energy for the reverse reaction will be lower than that of the forward reaction since less energy is required to reach the transition state.

By subtracting the enthalpy change (ΔH_forward) from the activation energy of the forward reaction, we account for the energy difference between the reactants and products and obtain the appropriate activation energy for the reverse reaction. Hence, the answer is C. Ea of the forward reaction minus ΔH_forward.

Learn more about endothermic reaction here https://brainly.com/question/31756484

#SPJ11

The density of oxygen (O2) at STP (standard temperature and pressure) of 1.00 atm and 25.0 °C is 1.43 g/L.

STP is defined as a temperature of 273.15 K (0 °C) and a pressure of 1 atmosphere (1.00 atm). However, in this case, the temperature is given as 25.0 °C, which is equal to 298.15 K. Therefore, we need to adjust for the difference in temperature.

To calculate the density of oxygen at STP, we use the ideal gas law: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.

Since we know the pressure and temperature, we can find the volume occupied by 1 mole of oxygen gas using the ideal gas law. At STP, 1 mole of any gas occupies 22.4 L.

So, V = 22.4 L/mol

Next, we need to find the number of moles of oxygen gas present. The molar mass of O2 is 32 g/mol.

Therefore, the number of moles of O2 gas present is:

n = m/M = 1 g / 32 g/mol = 0.03125 mol

Now we can calculate the density using the formula:

density = mass/volume

density = (m/M)/V = (1 g / 32 g/mol) / 22.4 L/mol = 0.0446 g/L

However, this density is not at the given temperature of 25.0 °C. To adjust for temperature, we can use the following formula:

density at T2 = density at T1 × (T2/T1) × (P1/P2)

Substituting the values, we get:

density at 25.0 °C = 0.0446 g/L × (298.15 K / 273.15 K) × (1.00 atm / 1.00 atm)

density at 25.0 °C = 1.43 g/L

Therefore, the density of oxygen (O2) at STP of 1.00 atm and 25.0 °C is 1.43 g/L.

Learn more about density here :

https://brainly.com/question/29775886

#SPJ11

To make the target compounds on the right from the starting compounds on the left, we need to follow a 3-step process that involves protecting the amine group, deprotecting the Boc group, and alkylating the free amine.

The key reagents and conditions for each step are di-tert-butyl dicarbonate (Boc2O), triethylamine (Et3N), dichloromethane (CH2Cl2), trifluoroacetic acid (TFA), methanol (MeOH), triethylsilane (Et3SiH), methyl iodide (MeI), DMF (N,N-dimethylformamide), and potassium carbonate (K2CO3). The important intermediate compounds are the Boc-protected amine and the free amine. The reaction conditions for this step typically involve the use of a polar aprotic solvent, such as DMF (N,N-dimethylformamide), and an inorganic base, such as potassium carbonate (K2CO3). The reaction proceeds via an SN2 mechanism, with the MeI acting as the alkylating agent and the amine acting as the nucleophile.

To know more about compounds visit :-

https://brainly.com/question/30037191

#SPJ11

A molecule contains three identical polar bonds in a trigonal planar molecular geometry, the molecule is not polar.

This is due to the symmetry of the molecule and the cancelation of the individual bond dipoles. In a trigonal planar geometry, the three bonds are evenly spaced at 120-degree angles from each other around the central atom. Each polar bond has a bond dipole, which is a vector quantity representing the separation of charges within the bond. Due to the symmetric arrangement of the bonds, these bond dipoles are also equally spaced and have the same magnitude.

When determining the overall polarity of a molecule, it's crucial to consider the net dipole moment, which is the vector sum of all bond dipoles in the molecule. In this case, the bond dipoles cancel each other out due to their equal magnitudes and opposite directions. As a result, the net dipole moment of the molecule is zero, indicating that the molecule is nonpolar.

To summarize, a molecule with three identical polar bonds in a trigonal planar molecular geometry is not polar because the symmetric arrangement of the bonds causes the individual bond dipoles to cancel each other out, resulting in a net dipole moment of zero.

Know more about Polar bonds here :

https://brainly.com/question/29144393

#SPJ11

The structure of sorbose is an aldohexose with hydroxyl groups on C-2, C-3, and C-4 positioned in a D-configuration and an aldehyde group at C-1.

Sorbose is a type of monosaccharide, specifically a D-2-ketohexose. The structure of sorbose has six carbons, with an aldehyde group at C-1, and hydroxyl groups attached to the other carbons. The D-configuration means that the hydroxyl groups on C-2, C-3, and C-4 are all on the same side of the Fischer projection, making it a right-handed molecule.

When sorbose is treated with NaBH4, it undergoes a reduction reaction, converting the ketone group to an alcohol, resulting in a mixture of gulitol and iditol. Gulitol and iditol are stereoisomers, differing only in the configuration of their hydroxyl groups, which is a result of the reduction reaction.

Sorbose is commonly found in fruits and is used in the food industry as a sweetener and preservative. Understanding the structure and properties of sorbose is important in determining its applications in various fields, including biotechnology, medicine, and agriculture.

Learn more about sorbose here:

https://brainly.com/question/30327264

#SPJ11

The numerical value of ℓ corresponding to the 3p orbital is 1. This is because p orbitals have ℓ values of 1.

In order to find the numerical value of ℓ for a 3p orbital, we need to understand the quantum numbers.
The principal quantum number (n) represents the energy level and can be any positive integer (1, 2, 3, etc.). In this case, n = 3.
The azimuthal quantum number (ℓ) represents the shape of the orbital and can have integer values ranging from 0 to (n-1). The ℓ values correspond to different orbital shapes: 0 is s, 1 is p, 2 is d, and 3 is f.
For a 3p orbital, we are given n = 3 and the orbital shape is p. Since p corresponds to an ℓ value of 1, the numerical value of ℓ for a 3p orbital is 1.
so: ℓ = 1

For more such questions on 3p orbital , Visit:

https://brainly.com/question/16745549

#SPJ11

The numerical value of ℓ corresponding to the 3p orbital is 1.

In the quantum mechanical description of atomic orbitals, the principal quantum number (n) represents the energy level or shell, and the azimuthal quantum number (ℓ) represents the shape of the orbital. For the p orbitals, ℓ takes the values of 1. The 3p orbital corresponds to the third energy level (n = 3) and has an azimuthal quantum number of 1. Therefore, for the 3p orbital, the value of ℓ is 1.

Learn more about atomic orbitals here:

https://brainly.com/question/28240666

#SPJ11

0.10 M will be the concentration of A after 80 min.

We need to use the equation for first order reactions, which is: ln[A]t = -kt + ln[A]0, where [A]t is the concentration of A at time t, k is the rate constant, and [A]0 is the initial concentration of A.
We are given that the half-life of the reaction is 20 minutes, which means that k = ln2/20 = 0.03465 min^-1.
We can now use this value of k to find the concentration of A after 80 minutes:
ln[A]80 = -0.03465 x 80 + ln(1.6)
ln[A]80 = -2.772 + 0.470
ln[A]80 = -2.302
To get the concentration of A, we need to take the antilog of this value:
[A]80 = e^-2.302
[A]80 = 0.099 M
Therefore, the answer is (C) 0.10 M.
Substance A undergoes a first-order reaction A → B with a half-life of 20 minutes at 25 °C. The initial concentration of A is 1.6 M. To determine the concentration of A after 80 minutes, we can use the half-life concept. Since 80 minutes is equivalent to 4 half-lives (80 minutes / 20 minutes per half-life), we can calculate the concentration as follows:
1st half-life (20 min): 1.6 M / 2 = 0.8 M
2nd half-life (40 min): 0.8 M / 2 = 0.4 M
3rd half-life (60 min): 0.4 M / 2 = 0.2 M
4th half-life (80 min): 0.2 M / 2 = 0.1 M
Therefore, the concentration of A after 80 minutes will be 0.1 M (Option C).

To know more about First order reaction visit:

https://brainly.com/question/31141406

#SPJ11