a balloon initially has a volume of 0.400 L. the temperature is 20.C what will be the volume when he heats the balloon up to 250C

Mendeleev is given the most credit for the concept of a periodic table of the elements because he emphasized its usefulness in predicting the existence and properties of unknown elements.

This is referred to as a tabular arrangement of the chemical elements by increasing atomic number which displays the elements so that one may see trends in their properties.

It consists of a rows and columns arrangement of the chemical elements and each they are grouped according ti the similar features which are present in the elements.

Mendeleev was the scientist who was given the most credit for the concept of a periodic table of the elements despite others working on it previously as a result of his emphasis in its usefulness in predicting the existence and properties of unknown elements.

Read more about Periodic table here https://brainly.com/question/1173237

#SPJ1

Since lead has a density of 11.53 g/cm^3, the volume of a 0.255 pound sample of lead is equal to 10.03 cm³.

In Science, the density of a chemical substance such as lead can be calculated by using this formula:

Density = M/V

Where:

Next, we would convert the value of the mass in pound to grams by multiplying it by 453.6 as follows;

Mass = 0.255 × 453.6

Mass = 115.668 grams

Making volume the subject of formula, we have:

Volume = Mass/Density

Volume = 115.668/11.53

Volume = 10.03 cm³.

Read more on density here: brainly.com/question/14035509

#SPJ1

The pressure inside the container with 5 moles of gas, 62 liters volume and 222K temperature is 1.46 atm.

Ideal gas law illustrates the relation between pressure, volume and temperature of a gas. It is represented by the equation

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles, R is the gas constant and T is the temperature.

V = 62 liters

n = 5 moles

R = 0.0821  L(atm) mol⁻¹K⁻¹

T = 222K

PV = nRT

P × 62 = 5 × 0.0821 × 222

P = 5 × 0.0821 × 222/62

P = 1.46 atm

To learn more about ideal gas law here

https://brainly.com/question/27870704

#SPJ4

Taking into account the definition of molarity,  the molarity of a solution made up of 15.5 mol of ammonium sulfate dissolved in enough water to make 45 liters of solution is 0.34 moles/L.

The molar concentration is a measure of the concentration of a solute in a solution, be it some molecular, ionic or atomic species and indicates the number of moles of solute contained in one liter of solution.

The molarity of a solution is calculated by:

molarity= number of moles÷ volume

Molarity is expressed in units moles/L.

In this case, you have:

Replacing in the definition of molarity:

molarity= 15.5 moles÷ 45 L

Solving:

molarity= 0.34 moles/L

Finally, the molarity of the solution is 0.34 moles/L.

Learn more about molarity:

brainly.com/question/9324116

brainly.com/question/10608366

brainly.com/question/7429224

#SPJ1

The assumed or arbitrary molarity of anions in the chemist's solution is found out to be 2.17 M.

Since neither the mass of magnesium bromide  and the volume of the volumetric flask are not given, one can assume arbitrary values and you could modify them whenever you want, thus, let 50.0g of magnesium bromide to be the measured out amount of solute and a 250-mL volumetric flask where the solution is prepared, so the final volume of the solution is 250 mL after the addition of distilled water. In this manner, the bromide anions moles, taking into account there are two bromide moles per magnesium bromide moles giving the value of 0.543 mols.

The molarity can be calculated as follows:

M= 0.543 mol Br-/0.250 L= 2.17 M

To learn more about molarity check the link below:

https://brainly.com/question/14469428

#SPJ4

The conservation of natural resources be most effective in reducing carbon dioxide in the atmosphere,  is the planting more trees.

The planting the more new tress is the one of the most effective ways to reduce the atmospheric carbon dioxide. this will also limits the global warming. the plants remove the carbon dioxide from the atmosphere through the photosynthesis. plants helps to stop the climate change as they will remove the carbon dioxide from the atmosphere. and  store the carbon in tress and the soil.

Thus , the way to reduce the carbon dioxide from the atmosphere is the planting more and more trees.

To learn more about  carbon dioxide here

https://brainly.com/question/19923519

#SPJ4

An empty bottle has volume of 2 L at room temperature 25°C . If we put it in the freezer (-4°C), the new volume will be 1.8L.

According to Charles' law, " the volume of a given amount of gas held at constant pressure is directly proportional to the kelvin temperature". The equation is represented as:

V₁/T₁ = V₂/T₂

This means, with increase in temperature, volume will also increase and vice versa.

According to question,

V₁ = 2.0 L

T₁ = 25°C = (25+273)K = 298 K

T₂ = -4°C = (-4 + 273)K = 269 K

Using Charles' law equation,

V₁/T₁ = V₂/T₂

⇒V₂ = V₁×T₂ / T₁

⇒V₂ = 2L × 269 K/298K

⇒V₂ = 1.8 L

Thus, the new volume when the bottle is put in a freezer (-4°C ) is 1.8 L

To know more about Charles' law here

https://brainly.com/question/15969029

#SPJ4

H2SO3, or sulfuric acid, is a compound that behaves as an acid when dissolved in water. The other compounds listed are either bases, alkanes, or ethers and are not acidic when dissolved in water.

H2SO3, or sulfuric acid, is a compound that behaves as an acid when dissolved in water. Acids are compounds that donate protons when dissolved in aqueous solutions, and sulfuric acid is one of the most common acids used in aqueous solutions. Other compounds listed, such as CH3OCH3, KOH, and CH4, are not acids when dissolved in water. CH3OCH3 is an ether, KOH is a base, and CH4 is an alkane. Acids will typically have a pH value less than 7, while bases have a pH greater than 7. H2SO3 is a strong acid with a pH value of around 1, making it the only compound listed that behaves as an acid when dissolved in water.

learn more about acid here

https://brainly.com/question/14072179

#SPJ4

O copper of the following elements can be prepared by electrolysis of their aqueous salts

H+ ions are drawn to the cathode during the electrolysis of water, where they pick up electrons to create hydrogen gas. The oxygen gas is formed when OH-ions are drawn to the anode and lose their electrons.

Sodium chloride solution electrolysis is a significant industrial process. Chlorine gas is created at the positive electrode; hydrogen gas is created at the negative electrode; and an alkali is left in the solution as three valuable chemicals.

learn more about electrolysis

https://brainly.com/question/12994141

#SPJ4

The block has a density of 7.3 g/ml. The density is the same as for tin. Tin is the metal's true identity.

Absolute population and particle density are the two main types of density. Relative density, also called as coarse aggregate, is the ratio of a substance's density to the volume of a reference substance. The reference substance is often water.

The density of a substance is a measurement of its thickness in relation to its volume. A product will float in a solution if its density is lower than the water's, while it will sink if it has a higher density.

Density of the block can be calculate as follows:

Volume of metal = 1xb×h

I = 0.5839 in

b = 0.531 in

h = 0.4981 in

volume = 0.5839×0.531×0.4981

=0.1544363

=2.53ml

mass of metal =1.84×10⁴ mg

=18.4 g

density = g/ml

=18.4/2.53

=7.3 g/ml

from its density we can conclude the block of metal is Tin

To know more about density visit:

brainly.com/question/29775886

#SPJ4

The time taken for a given amount of 32P to decay to one-eight of its original activity is 42 days.

A substance's half-life is the amount of time it takes for half of it to decompose. Given that each half-life period diminishes the activity by a factor of 2, if a given amount of a material with a half-life of 14 days decays to one-eighth of its initial activity, it must have gone through three half-life periods. Therefore, it would take 14 x 3 = 42 days for a given amount of 32P to decay to one-eighth of its initial activity.

Learn more about chemical decay at

https://brainly.com/question/10757669

30% of the original amount of mixture evaporated during the 10-day period.

In order to determine the percentage of the original amount of mixture that evaporated during the 10-day period, we need to first determine how much water and how much liquid chemical were present in the beaker initially.

Given that the ratio of water to liquid chemical is 3:5, we can assume that the total number of parts is 8 (3+5).

So, the original amount of water is 3 parts / 8 parts = 0.375

And the original amount of liquid chemical is 5 parts / 8 parts = 0.625

We can then use this information to determine how much of each substance evaporated each day:

2% of 40 L of water = 0.02 x 40 L = 0.8 L

5% of 40 L of liquid chemical = 0.05 x 40 L = 2 L

We can then add up the total amount of each substance that evaporated over the 10 days to find the total amount that evaporated from the beaker:

0.8 L of water evaporated/day x 10 days = 8 L

2 L of liquid chemical evaporated/day x 10 days = 20 L

Finally, we can add up the total amount of each substance that evaporated and divide by the total amount of the original mixture to find the percentage of the original amount that evaporated:

(8 L + 20 L) / (40 L + 40 L) = 0.3 or 30%

So 30% of the original amount of mixture evaporated during the 10-day period.

Learn similar problems here: https://brainly.com/question/14919501

#SPJ4

The peptides amino acids form peptide linkages between -COOH and -NH2 groups in protein.

What do you mean by peptides?

Peptides are short chains of amino acids that are linked together by peptide bonds. They are found in all living organisms and play important roles in many biological processes, such as cell signaling, hormone production, and metabolism. Peptides can range in size from two to hundreds of amino acids and can be made up of different combinations of amino acids.

Peptide bonds are formed when the carboxyl group (COOH) of one amino acid reacts with the amino group (NH2) of another amino acid. This creates a peptide bond, which is a covalent bond between the two amino acids. As proteins are made up of many amino acids, this process of forming peptide bonds is what links the amino acids together to form a protein.

To know more about Peptide,

https://brainly.com/question/21884818

#SPJ4

Alpha-linolenic acid (ALA) is an essential omega-3 fatty acid that is found in certain plant oils, such as flaxseed and canola oil, and in some nuts and seeds. It is considered an essential fatty acid because the body cannot produce it and it must be obtained through the diet.

Eicosapentaenoic acid (EPA) is a biologically available form of omega-3 fatty acid that can be produced from ALA through a series of metabolic processes. The percentage of ALA that converts to EPA in the body varies depending on a number of factors, such as individual genetics, dietary factors, and overall health.

On average, the conversion rate of ALA to EPA is relatively low, with estimates ranging from 0.1-9% in healthy adults. The exact percentage of conversion is not well-established, but it is believed to be low due to the limited activity of the enzymes involved in the conversion process.

It's also important to note that not all of the EPA produced from ALA will be used by the body, as some of it will be converted to other fatty acids such as docosahexaenoic acid (DHA). The conversion rate of ALA to DHA is even lower, typically less than 0.5%.

It's important to note that some studies show that supplementation with EPA and DHA may be more beneficial for some health outcomes than supplementing with ALA, as these forms of omega-3 are more easily incorporated into cell membranes and have a more direct effect on the body.

Learn more about Omega-3 Fatty Acids here: https://brainly.com/question/30114491

#SPJ4

Compared to safety standards, that would be too little chlorine:

10,000 gallons is five times as much water as 2,000.

Therefore, Park's pool needs five times as much chlorine as is required for 2,000 gallons to meet safety regulations.

5 times 3 pills of chlorine equals 15 tablets. For Mark to meet safety standards, 15 chlorine tablets would be required. Use one three-inch tablet for every 10,000 gallons of pool water rather than stuffing your chlorinator or floater to the brim with tablets. This quantity of pills should be sufficient to maintain a good chlorine level if you shock your water once a week.

Learn more about chlorine here-

https://brainly.com/question/14962130

#SPJ4

Metal reactivity decreases on moving from left to right in the modern periodic table due to the decrease in atomic size and inability to lose valence electrons.

Metals have the tendency to lose electrons and form cations. In the modern periodic table, consisting of 7 horizontal periods and 18 vertical  groups, when we move left to right across a period, the size of atoms decreases and the nuclear pull also increases due to which the elements cannot readily lose electrons and show metallic property.

Hence, on moving from left to right in a period, metallic character decreases and non-metallic character increases.

To know more about metal reactivity here

https://brainly.com/question/18187589

#SPJ4

Based on this table which describes geological events, a statement that is most likely correct include the following: B. Event A represents volcanic eruption and Event B represents earthquakes.

Generally speaking, a divergent boundary is characterized by plates that are moving apart from one another, as well as basaltic volcanism and seafloor spreading. Also, a typical example of a divergent is the Mid-Atlantic Ridge.

In this context, we can reasonably infer and logically deduce that Event A is a geological event which most likely represents volcanic eruption because it occurred at both convergent and divergent boundary.

Furthermore, a convergent boundary simply refers to a region where lithosphere or crust is sinking into the mantle. Also, an example of a convergent is a region where subduction zones or collisions occur such as the west coast of South America.

In conclusion, a transform boundary simply refers to a boundary that is normally devoid of volcanism, but allows for the occurrence of earthquakes.

Read more on earthquakes here: brainly.com/question/248561

#SPJ1

When a molecule undergoes phase transition from gas to liquid, it means that there is an increase in the attractive force.

The matter which is present around us exists in three major states which are solids, liquids and gases. The attractive forces that are present between the particles of matter are known as the intermolecular forces and they change with the change or transition in state of matter.

The particles of solids have the highest intermolecular force followed by liquids and then followed by gas. When a particular gas changes into the liquid state, the attractive forces between its particles increases.

To know more about attractive force here

https://brainly.com/question/11212600

#SPJ4

Irony of situation is a discrepancy between the expected result and actual results. Irony involves the perception that things are not what they are said to be or what they seem.

One thing is expressed while another is meant in an ironic statement. For example, on a chilly, wet gray day, you would exclaim, "What a gorgeous day!" Alternatively, if you were suffering from a severe case of food sickness, you may respond, "Wow, I feel terrific today." "ffers points of view and ideas that are, at most, intriguing... However, it does not reach the truth." Ronagh and Souder are particularly concerned with scientific assertions that are not meant to be taken seriously.

Here,

The irony of the issue is the difference between the expected and actual results. Irony is the impression that things are not what they appear to be or what they are purported to be.

To know more about irony,

brainly.com/question/1695719

#SPJ4

First, we must compute the index of hydrogen deficiency, IHD, using the molecular formula of the compound [tex]C_{10}H_{14}O_{2}[/tex].

What is a spectrum data?

Spectrum data is data collected from spectroscopic experiments, which measure the interaction of matter with electromagnetic radiation. This data can be used to identify the chemical composition of a sample, as different elements and molecules absorb and emit radiation at different wavelengths.

Then, number of C atoms - [tex]\frac{number of atoms}{2} + 1[/tex]

                                          = [tex]10 + \frac{14}{2} + 1[/tex]

                                          = [tex]10 - 7 + 1[/tex]

                                          = [tex]4[/tex]

Based on the molecular structure, this tells us how many multiple bonds and rings the compound has.

This compound contains four unsaturated bonds. We can tell from the spectrum data that it is aromatic (chemical shifts above 6 comes from aromatic protons). Based on this, we can conclude that the structure of this compound contains a benzene ring. Four IHD are found in the benzene ring, one from the ring and three from double bonds.

Following that, IR spectrum data revealed that absorption on [tex]3150-2850 cm^{-1}[/tex] indicated hybridised CH bonds.

The following chemical shifts are observed in the NMR spectrum data:

On 1,4ppm, it becomes a 6H triplet. It has two protons in its neighbourhood because it is a triplet, and it comes from [tex]CH_{3}(1)[/tex]. This group must be linked to the [tex]CH_{2}(2)[/tex].

A quartet on 4,0ppm, belongs to 4H from [tex]CH_{2}(2)[/tex].  It has 3 protons in neighborhood stop it it attached to the [tex]CH_{3}(1)[/tex] and singlet on 6,8ppm comes of aromatic protons, 4H (3).

Based on the [tex]^{1} HNMR[/tex] spectrum data, we can only attach the two O atoms to the benzene ring and the [tex]CH_{2}(2)[/tex] group.

To know more about spectrum data,

https://brainly.com/question/15178018

#SPJ4

False. Value streaming mapping technique is used to analyze the flow of information, people and material required to bring a product to a consumer.

The value stream mapping is a series of steps. Value stream mapping provides a structured visualization of the key steps and corresponding data needed to understand and intelligently make improvements that optimize the entire process. Value stream is a series of steps that occur to provide the product or service that customers wants. Value stream mapping enables us to understand where the value is added, where it’s not and more importantly, how to improve upon the collective process.

To learn more about Value stream mapping please visit:

https://brainly.com/question/24157622

#SPJ4

Answer:

Below

Explanation:

You didn't list any choices but stuff life color, density, texture,hardness, luster are PHYSICAL properties

Answer:

trigonal pyramidal

Explanation:

In the case of water.

A substance has 0. 0152088 moles per 10 grammes. One can use the equation grams = weight / molar mass to determine this. The volume of one mole of a chemical is represented by its molar mass on the chemical elements.

You would take its weight (10g) and multiply it by the material's molar mass to determine the number of molecules within 10g of a substance. For instance, if the material is water, its molar mass is 18. 015 g/mol, meaning that 10 g is comparable to 0. 555 molecules of water.

However, the formula moles = mass / molar weight can be used to determine the number of moles in an unit weight regardless of the substance. Therefore, there are 0. 0152088 mole in 10

To know more about Weight click here

brainly.com/question/10069252

#SPJ4

The group 17 elements need only one more electron to complete a full octet since they already possess seven valence electrons. whereas group 16 elements needs 2 more electrons that why group 17 more reactive than Group 16

Because they easily acquire an electron to complete their outermost shell, halogens were highly reactive. Since they easily shed the solitary electron in their outermost shell, alkali metals were very reactive.

Since they easily acquire an electron to complete their outermost shell, halogens were highly reactive. Although they easily lose the lone electron within their outermost shell, alkali metals were highly reactive.

Group 17 elements occur only require one electron, therefore they can easily borrow an electron from another element to achieve a stable configuration for a noble gas. They were hence very reactive as well as will rapidly receive an electron to complete their outermost shell.

To know more about halogen elements

https://brainly.com/question/1450671

#SPJ4

The diagram on the right shows the correct representation of the hydrogen bonding between thymine and adenine base pairs.

Thymine is one of the four nitrogenous bases found in DNA. It is a pyrimidine base that pairs with Adenine in DNA to form a base pair. Thymine is essential for the proper replication and expression of genetic information and is the only base that bonds with Adenine in DNA. By forming base pairs, thymine helps to maintain the structure of DNA. It also helps to prevent errors in replication and transcription. Thymine is also found in RNA, but instead of bonding with Adenine, it bonds with Uracil.

The hydrogen bonds form between the nitrogenous bases of the two complementary strands of DNA. The thymine molecule has two hydrogen atoms that bind to the nitrogen atom of the adenine molecule. The adenine molecule has two hydrogen atoms that bind to the nitrogen atom of the thymine molecule. This creates a strong link between the two strands of DNA, which is essential for the replication of the genetic material.

To know more about thymine click-

https://brainly.com/question/1380409
#SPJ4

The boiling point of CHCl₃ at a pressure of 101.325 kPa is 61.8°C (143.24°F).

The boiling point is the temperature at which the pressure exerted on a liquid by the environment equals the pressure exerted by the vapor of the liquid. Under these conditions, the application of heat converts the liquid to vapor without raising the temperature.

At any temperature, the liquid partially vaporizes into the space above until the pressure exerted by the vapor reaches a characteristic value called the vapor pressure of the liquid at that temperature. As the temperature rises, the vapor pressure increases. At boiling point, vapor bubbles form in the liquid and rise to the surface.

The boiling point of a liquid changes along the pressure. The normal boiling point is the temperature at which the vapor pressure equals normal atmospheric pressure at sea level (760 mm [29.92 inches] of mercury). At sea level, water boils at 100°C (212°F).

To learn more about boiling point,

https://brainly.com/question/28267496

#SPJ4

The complete question is as follows:

What will the boiling point of CHCL3 be when the atmospheric pressure exerted on its surface is 101.325 KPa?