a. An exciting endeavor, 50 archaeology students volunteer for the expedition although only 20 are needed. How many ways can the lead researchers pick 20 students from the 50 eager candidates

The length of time you would have to wait on average at the bus stop would be 15 minutes.

To calculate the average waiting time, divide the time between the arrival times of the two buses by two. This is due to the fact that you might arrive at any moment during the cycle, and the average waiting time will be half of the time difference between the two buses:

Average waiting time = (A + B) / 2

Solving for the average waiting time would be:

Average waiting time = ( 10 + 20 ) / 2

Average waiting time = 30 / 2

Average waiting time = 15 minutes

Find out more on average time at https://brainly.com/question/28881781

#SPJ1

This question involves the Pythagorean Theorem, which is a²+b²=c², which basically means, one side of the right angle added to the other side of the ride angle is equal to the hypotenuse/c/the longest line. In order to find a, there are two methods.

1) You split the triangle into 2, and find the middle. Which in this case, would be √15²-9² which is equal to 12. We can then add 12² to 16² to get a² which is 20.

2) Now the other way is to take it as an entire triangle. The hypotenuse is 9+16 which is 25, and √25²-15² will give us a, once again. Therefore, a = 20.

In both methods, the answer to a is 20.

Since our p-value is greater than our significance level, we fail to reject the null hypothesis. This means that there is not sufficient evidence at the 0.05 level to conclude that the bags are underfilled or overfilled.

To determine whether the bag filling machine is working correctly at the 447 gram setting, we can conduct a hypothesis test.

Our null hypothesis would be that the bags are being filled correctly at the 447 gram setting, while the alternative hypothesis would be that the bags are either underfilled or overfilled.

Using the information given, we can calculate a t-score:

t = (449 - 447) / (27 / sqrt(25)) = 0.2963

We can then use a t-distribution table with 24 degrees of freedom (25 bags - 1) to find the p-value associated with this t-score.

Assuming a significance level of 0.05, our critical t-value would be 2.064.

Looking up the p-value associated with our t-score of 0.2963, we find that it is 0.7703.

Know more about significance level here:

https://brainly.com/question/13947717

#SPJ11

The linear formula to depict the change in altitude as a function of time (in minutes) is: altitude (in feet) = -25 × time (in minutes) + 3000.

The change in altitude is a linear function of time, with a slope of -500 feet per 20 minutes, since the hiker is descending. To find the y-intercept, we can use the initial altitude of 3000 feet.

Let y be the altitude in feet and x be the time in minutes. Then the formula is:

y = mx + b

where m is the slope and b is the y-intercept.

Substituting the given values, we get:

y = -25x + 3000

Therefore, the linear formula to depict the change in altitude as a function of time (in minutes) is:

altitude (in feet) = -25 × time (in minutes) + 3000.

for such more question on linear formula

https://brainly.com/question/19803308

#SPJ11

R2 value less than 1 does not necessarily mean that the regression analysis is incorrect or that the observation data is suspect.

Rather, it suggests that there may be additional factors to consider when interpreting the results.

The statement "If R2 is less than 1, the regression analysis is incorrect" is not entirely true.

R2 is a statistical measure that indicates the proportion of the variance in the dependent variable that is explained by the independent variable(s). R2 values range from 0 to 1, where 0 indicates no correlation and 1 indicates perfect correlation.

If R2 is less than 1, it simply means that the independent variable(s) are not able to explain all of the variation in the dependent variable.

This does not necessarily mean that the regression analysis is incorrect.

In fact, it is common for regression analyses to have R2 values that are less than 1.

The key is to interpret the R2 value in conjunction with other statistical measures and to consider the research question being addressed.

Some possible implications of having an R2 value less than 1 might include:

The independent variable(s) have a weaker relationship with the dependent variable than anticipated.

There may be other factors that are influencing the dependent variable that are not accounted for in the regression analysis.

The sample size may be too small to detect a significant relationship between the independent and dependent variables.

For similar questions on analysis

https://brainly.com/question/31158240

#SPJ11

Answer:

The 30 oz option for $2.99 is the better buy. It costs $0.10 per ounce, whereas the 15 oz option costs $0.10 per ounce.

The ride duration will takes approximately 4.4 seconds for the rider to travel from the bottom of the wheel to a point 10 feet above the bottom.

We can solve this problem using the concepts of circular motion and trigonometry.

Let's first consider the motion of the rider along the circumference of the wheel.

The circumference of the wheel is 2πr, where r is the radius of the wheel.

In this case, r = 20 feet, so the circumference is 2π(20) = 40π feet.

The rider travels this distance at a constant speed of one revolution per minute.

The rider starts at point A, which is at the bottom of the wheel, and travels to a point 10 feet above the bottom, which we'll call point B.

We want to find the time it takes for the rider to travel from A to B.

We can see that the distance AB is the hypotenuse of a right triangle with height 10 feet and base 20 feet (the radius of the wheel).

Therefore, using the Pythagorean theorem,

We can find that AB = sqrt([tex]20^2[/tex] + [tex]10^2[/tex]) = sqrt(500) = 10sqrt(5) feet.

To find the portion of the circumference that corresponds to this distance, we can use the formula for the length of an arc of a circle:

s = rθ

where s is the length of the arc, r is the radius of the circle, and θ is the central angle subtended by the arc (in radians).

In this case, we know that s = 10sqrt(5) feet and r = 20 feet. To find θ, we need to use trigonometry.

In the right triangle OAB, the angle θ is given by:

tan(θ) = 10 / 20 = 1/2

Therefore, θ = tan-1(1/2) ≈ 0.464 radians.

Now we can use the formula for the length of an arc to find the portion of the circumference that corresponds to the distance AB:

s = rθ

= (20)(0.464)

≈ 9.28 feet

Finally, we can use the fact that the rider travels at a speed of 40π feet per minute to find how long it takes to travel 9.28 feet:

t = s / v = 9.28 / (40π) ≈ 0.073 minutes

To convert this to seconds, we multiply by 60:

t ≈ 4.4 seconds

For similar question on ride duration:

https://brainly.com/question/29265926

#SPJ11

The proportion of observed variation can be estimated by calculating the value of [tex]R^2[/tex] for the regression model.

[tex]R^2[/tex] measures the proportion of the total variation in the dependent variable that can be explained by the independent variable in the linear regression model.

[tex]R^2[/tex] represents the proportion of the total variation in the dependent variable (endurance) that can be explained by the independent variable (lactate level) in the linear regression model.

It is calculated as the ratio of the explained variation to the total variation, and its value ranges from 0 to 1.

In other words, [tex]R^2[/tex] measures how well the linear regression model fits the observed data points.

A higher value of [tex]R^2[/tex] indicates a better fit and suggests that a larger proportion of the variation in the dependent variable can be explained by the independent variable.

Therefore, if a regression analysis were carried out to predict endurance from lactate level.

The proportion of observed variation in endurance that can be attributed to the approximate linear relationship can be estimated by calculating the value of [tex]R^2[/tex] for the regression model.

Learn more about linear regression model

brainly.com/question/31328926

#SPJ11

In summary: (a) 1 from each class: Probability = 0.1439, (b) 2 sophomores and 2 juniors: Probability = 0.03596, (c) Only sophomores or juniors: Probability = 0.03796

To find the probability of selecting a committee with specific characteristics, we need to first determine the total number of possible committees.

Total number of possible committees = C(14,4) = 1001, where C(n,r) is the number of combinations of n things taken r at a time.

(a) To have one member from each class, we need to choose one freshman, one sophomore, one junior, and one senior. The number of ways to do this is: C(3,1) * C(4,1) * C(4,1) * C(3,1) = 144. Therefore, the probability of selecting a committee with one member from each class is:

P(a) = 144/1001 = 0.144

(b) To have two sophomores and two juniors, we need to choose 2 from the 4 sophomores and 2 from the 4 juniors. The number of ways to do this is: C(4,2) * C(4,2) = 36. Therefore, the probability of selecting a committee with two sophomores and two juniors is:

P(b) = 36/1001 = 0.036

(c) To have only sophomores or juniors, we need to choose 4 from the 4 sophomores and 0 from the 4 juniors OR choose 0 from the 4 sophomores and 4 from the 4 juniors. The number of ways to do this is: C(4,4) + C(4,0) = 2. Therefore, the probability of selecting a committee with only sophomores or juniors is:

P(c) = 2/1001 = 0.002
To find the probability of each scenario, we'll first find the total number of possible committees and then the number of ways each specific scenario can occur.

Total students = 3 freshmen + 4 sophomores + 4 juniors + 3 seniors = 14 students
Total possible committees = C(14, 4) = 14! / (4! * (14-4)!) = 1001

(a) 1 from each class:
We'll choose 1 freshman, 1 sophomore, 1 junior, and 1 senior.
Ways to choose = C(3,1) * C(4,1) * C(4,1) * C(3,1) = 3 * 4 * 4 * 3 = 144
Probability = 144 / 1001 = 0.1439

(b) 2 sophomores and 2 juniors:
Ways to choose = C(4,2) * C(4,2) = 6 * 6 = 36
Probability = 36 / 1001 = 0.03596

(c) Only sophomores or juniors:
We'll either have 4 sophomores, 4 juniors, or 2 sophomores and 2 juniors.
Ways to choose = C(4,4) * C(4,0) + C(4,0) * C(4,4) + C(4,2) * C(4,2) = 1 * 1 + 1 * 1 + 36 = 38
Probability = 38 / 1001 ≈ 0.03796

In summary:
(a) 1 from each class: Probability = 0.1439
(b) 2 sophomores and 2 juniors: Probability = 0.03596
(c) Only sophomores or juniors: Probability = 0.03796

Learn more about Probability at: brainly.com/question/30034780

#SPJ11

The functions y=2x and y=-2x has different slopes 2 and -2 respectively.

The given equation is y=-2x.

Graph the line using the slope and y-intercept, or two points.

Slope: -2

y-intercept: (0,0)

Solve for the first variable in one of the equations, then substitute the result into the other equation.

Point Form: (0,0)

Equation Form: x=0, y=0

Here, in the functions y=2x and y=-2x

The slope is different 2 and -2.

Both the functions has same solution (0, 0)

Therefore, the functions y=2x and y=-2x has different slopes 2 and -2 respectively.

To learn more about the function visit:

https://brainly.com/question/28303908.

#SPJ1

To find the values of x at the points where y = 4x - x² intersects y = 0, we can set 4x - x² equal to 0 and solve for x.

4x - x² = 0

Factor out x:

x(4 - x) = 0

Therefore, either x = 0 or 4 - x = 0.

If x = 0, then the point where the two curves intersect is (0,0).

If 4 - x = 0, then x = 4 and the point where the two curves intersect is (4,0).

So the values of x at the points where the two curves intersect y = 0 are x = 0 and x = 4.

One possible dependent measure for your experiment could be the looking time of the babies towards each collection of objects. You can use a visual preference method where you present the babies with both collections of objects side-by-side and measure the amount of time they spend looking at each one.

Another possible dependent measure is habituation or dishabituation. In this method, you repeatedly present one collection of objects to the babies until they become habituated, i.e., they stop paying attention to it. Then, you introduce the other collection of objects and measure if the babies show a renewed interest, indicating that they perceive a difference between the two collections.

Other measures could include physiological measures such as heart rate or brain activity using non-invasive techniques like electroencephalography (EEG) or functional near-infrared spectroscopy (fNIRS). However, these measures may require more specialized equipment and expertise.

for such more question on word problem

https://brainly.com/question/1781657

#SPJ11

The probability that a random sample of 36 resistors is 1, or 100%.

We can use the central limit theorem to approximate the distribution of the sample mean of 36 resistors as a normal distribution with mean μ = 40 ohms and standard deviation σ/√n = 4/√36 = 4/6 = 0.67 ohms.

Let X be the random variable representing the combined resistance of a sample of 36 resistors. Then:

X ~ N(μ, σ²/n)

X ~ N(40, (4/6)²)

To find the probability that a random sample of 36 resistors will have a combined resistance of more than 1494 ohms, we need to standardize X:

Z = (X - μ) / (σ/√n)

Z = (1494 - 3640) / (4/6√36)

Z = -30

We want to find P(Z > -30). This probability is essentially 1, because the standard normal distribution is continuous and has no mass at any specific point, so the probability of any exact value is zero. Therefore, we can approximate P(Z > -30) as 1.

Therefore, the probability that a random sample of 36 resistors will have a combined resistance of more than 1494 ohms is approximately 1, or 100%.

Learn more about Probability

brainly.com/question/30034780

#SPJ11

So, we can estimate with 95% confidence that the proportion of Broward College students who are employed is between 77.3% and 82.7%.

onstruct a 95% confidence interval estimate for the proportion of Broward College students who are employed. In this survey, we have a sample size (n) of 835 students, of which 668 are employed.

To calculate the sample proportion (p), we divide the number of employed students by the total sample size:

p = 668 / 835 ≈ 0.8

To construct a 95% confidence interval, we need the standard error (SE) of the proportion. We can calculate SE using the following formula:

SE = sqrt(p(1 - p) / n) ≈ sqrt(0.8(1 - 0.8) / 835) ≈ 0.014

Next, we need the critical value (z) for a 95% confidence interval, which is approximately 1.96. Now, we can calculate the margin of error (ME):

ME = z * SE ≈ 1.96 * 0.014 ≈ 0.027

Finally, we can construct the 95% confidence interval by adding and subtracting the margin of error from the sample proportion:

Lower bound: p - ME ≈ 0.8 - 0.027 ≈ 0.773
Upper bound: p + ME ≈ 0.8 + 0.027 ≈ 0.827

To learn more about confidence interval click here

brainly.com/question/24131141

#SPJ11

The probability of observing 182 or fewer women in the sample under H0, which is the same as P(X ≤ 182) ≈ 0.000000007. This is called the p-value.

We can use the binomial distribution to model this situation. Let X be the number of women in the sample of 404 people. Then X follows a binomial distribution with parameters n = 404 and p = 0.5, since the population is half women.

If the people were randomly chosen, then we can calculate the probability of observing 182 or fewer women in the sample as follows:

P(X ≤ 182) = Σ P(X = k) for k = 0, 1, ..., 182

Using a binomial probability table or calculator, we can find that:

P(X ≤ 182) ≈ 0.000000007

This means, that if the people were randomly chosen, the probability of observing 182 women or fewer in the sample is very small (less than 0.000001%).

Therefore, if we observe a sample with 182 women or fewer, we may suspect that the people were not randomly chosen and instead be biased against women.

To make this conclusion more rigorous, we can use statistical hypothesis testing. Let H0 be the null hypothesis that the people were randomly chosen and H1 be the alternative hypothesis that the people were biased against women.

We want to test if the observed sample with 182 women or fewer provides enough evidence to reject H0 in favor of H1.

We can use the significance level α to control the probability of making a Type I error, which is rejecting H0 when it is actually true. A common choice for α is 0.05.

Learn more about Probability

brainly.com/question/30034780

#SPJ11

Thus, the number of laps Mary swims now are 5 laps. If Mary swims 5 laps, then John swims 3 laps (since John swims two fewer laps than Mary).

To solve this problem, we need to use algebra. Let's start by defining some variables:

- Let's call the number of laps Mary swims "M".
- Since John swims two fewer laps than Mary, the number of laps John swims is "M - 2".
- If both added 7 laps to their daily swims, Mary would swim "M + 7" laps and John would swim "(M - 2) + 7" laps.

We know that the sum of their laps would be three times as many as Mary now swims, so we can set up an equation:
M + (M - 2 + 7) = 3M

Simplifying the equation, we get:
2M + 5 = 3M

Subtracting 2M from both sides, we get:
5 = M

Therefore, Mary now swims 5 laps.

To check our answer, we can use the information given in the problem.

If Mary swims 5 laps, then John swims 3 laps (since John swims two fewer laps than Mary). If both add 7 laps to their daily swims, Mary will swim 12 laps and John will swim 10 laps.

The sum of their laps would be 22, which is indeed three times as many as Mary now swims (since 22 = 3 x 5).

Know more about the algebra

https://brainly.com/question/6143254

#SPJ11

The probability that the call arrived when the switchboard was not fully busy, given that it arrived at random within the one-minute interval, is P(B) or 7/12.

The probability that the call arrived when the switchboard was not fully busy can be calculated using the concept of conditional probability. Let's define the event A as the call arriving during the 25-second period when the switchboard was fully busy, and event B as the call arriving during the remaining 35-second period when the switchboard was not fully busy. Since the call arrived at random within a one-minute interval, the probability of event A happening is 25/60 or 5/12 (25 seconds out of 60 seconds).
The probability of event B happening can be calculated as the complement of event A, which is 1 - 5/12 or 7/12 (35 seconds out of 60 seconds).
Therefore, the probability that the call arrived when the switchboard was not fully busy, given that it arrived at random within the one-minute interval, is P(B) or 7/12.

Learn more about probability here

https://brainly.com/question/24756209

#SPJ11

Answer:

plug the value of -b / 2a into the equation for x and solve fo y

Jose purchased 35  $0.43 stamps and 90 $0.03 stamps.

Using Algebra, Let's let x be the number of $0.43 stamps and y be the number of $0.03 stamps. We know from the problem that:

y = 2x + 20 (the number of $0.03 stamps is 20 more than twice the number of $0.43 stamps)

We also know that the total amount paid for the stamps was $17.75. The amount paid for $0.43 stamps is 0.43x and the amount paid for $0.03 stamps is 0.03y. So we can write:

0.43x + 0.03y = 17.75

Now we can substitute y = 2x + 20 into the second equation and simplify:

0.43x + 0.03(2x + 20) = 17.75

0.43x + 0.06x + 0.6 = 17.75

0.49x = 17.15

x = 35

So Jose bought 35 $0.43 stamps. We can find the number of $0.03 stamps by using y = 2x + 20:

y = 2(35) + 20 = 90

So Jose bought 90 $0.03 stamps.

In summary, Jose purchased 35 $0.43 stamps and 90 $0.03 stamps for a total cost of $17.75.

Know more about algebra here:

https://brainly.com/question/11701178

#SPJ11

The R-squared value, check for collinearity, test for the significance of the beta coefficients, interpret the meaning of the estimated coefficient for Fitness Center, and use the multiple regression model to predict the rent price for a 1-bedroom apartment in Sacramento Area.

To predict the rent price for a 1-bedroom apartment in Sacramento Area, we can use the multiple regression model on the Sacramento Apartment dataset. This model considers the availability of Fitness Center, Parking Space, and Wireless Internet as predictors.
First, we need to check the performance of the model. The R-squared value indicates the proportion of variance in the rent price that is explained by the predictors. A higher R-squared value indicates a better performance of the model. If the R-squared value is close to 1, it means that the model explains almost all the variability in the rent price. Therefore, we need to calculate the R-squared value to determine if this is a high-performance model.
Second, we need to check if there is a collinearity problem with the model. Collinearity occurs when the predictor variables are highly correlated with each other, which can lead to unreliable estimates of the regression coefficients. We can check the correlation matrix to detect any high correlations between the predictor variables.
Third, we need to check the significance of the estimated betas. The t-test can be used to determine if the estimated beta coefficients are significantly different from zero. A significant beta coefficient indicates that the corresponding predictor variable has a significant effect on the rent price. The magnitude and sign of the beta coefficient indicate the direction and strength of the relationship between the predictor variable and the rent price.
Regarding the estimated coefficient for Fitness Center, a positive coefficient would indicate that the presence of a fitness center is associated with higher rent prices, while a negative coefficient would indicate the opposite. We can interpret the meaning of the estimated coefficient by looking at its magnitude and sign.
Finally, we can use the multiple regression model to predict the rent price for a 1-bedroom apartment in Sacramento Area with the given predictor variables. By plugging in the values for Fitness Center, Parking Space, and Wireless Internet, we can obtain an estimate of the rent price for the apartment.

Learn more about regression here

https://brainly.com/question/17004137

#SPJ11

The probability that a randomly chosen miniature Tootsie Roll will weigh more than 3.50 grams is 0.1587 or 16%.

The probability of a randomly chosen miniature Tootsie Roll weighing more than 3.50 grams can be determined through statistical analysis.

To do this, we need to consider the mean and standard deviation of the weight of Tootsie Rolls.

Assuming that the weight of Tootsie Rolls follows a normal distribution, we can use the z-score formula to find the probability of a randomly chosen Tootsie Roll weighing more than 3.50 grams.

The formula for calculating the z-score is:

z = (x - μ) / σ

where x is the observed weight, μ is the mean weight, and σ is the standard deviation.

Let's assume that the mean weight of miniature Tootsie Rolls is 3 grams and the standard deviation is 0.5 grams.

To find the z-score for a weight of 3.5 grams, we can plug in the values:

z = (3.5 - 3) / 0.5
z = 1

Using a z-score table, we can find that the probability of a z-score of 1 (or a Tootsie Roll weighing more than 3.5 grams) is 0.1587.

Therefore, the probability of a randomly chosen miniature Tootsie Roll weighing more than 3.50 grams is 0.1587 or approximately 16%.

It is important to note that this is an estimate based on assumptions about the distribution of Tootsie Roll weights. The actual probability may differ depending on factors such as batch variability, production methods, and storage conditions.

know more about probability here:

https://brainly.com/question/24756209

#SPJ11

The length of an edge of the smaller square is 17 inches.

Let's denote the length of an edge of the smaller square as 'x' inches. Since an edge of the larger square is 2 inches greater than the smaller square, its length would be 'x + 2' inches. The difference in their areas is given as 72 square inches.

Now, let's apply the formula for the area of a square (Area = side²) to both squares:

Area of the larger square = (x + 2)²
Area of the smaller square = x²

We are given that the difference in areas is 72 square inches, so we can write the equation:

(x + 2)² - x² = 72

Expanding the equation, we get:

x² + 4x + 4 - x² = 72

Simplifying the equation, we have:

4x + 4 = 72

Subtracting 4 from both sides, we get:

4x = 68

Now, divide by 4:

x = 17

Thus, the length of an edge of the smaller square is 17 inches.

To learn more about Area  click here

brainly.com/question/27683633

#SPJ11

Answer:

1) growth, a=2, b=3

2) growth, a=1/3, b=4

3) decay, a=5, b=1/2

4) growth, a=1, b=3

5) growth, a=3, b=3/2

6) growth, a=1, b=1.2

This procedure will help you systematically analyze the rewards and increase your probability of choosing the larger, delayed reward over the smaller, immediate one.

To increase your probability of choosing a large, delayed reward instead of a smaller, immediate reward, you can follow this procedure:

1. Identify the options: Clearly define the large, delayed reward and the smaller, immediate reward you are comparing.

2. Assess the probabilities: Determine the probability of receiving each reward based on available information or historical data.

3. Calculate the expected value: Multiply the reward amount by its respective probability for each option to find the expected value.

4. Apply a discount factor: To account for the time value of money, apply a discount factor to the delayed reward, which will reduce its present value. This step helps in comparing the two rewards more accurately.

5. Compare the expected values: Compare the expected values of the large, delayed reward and the smaller, immediate reward, considering the discount factor.

6. Choose the option with the higher expected value: Based on the comparison, choose the option with the higher expected value, which will more likely lead you to select the large, delayed reward instead of the smaller, immediate reward.

Following this procedure will help you systematically analyze the rewards and increase your probability of choosing the larger, delayed reward over the smaller, immediate one.

to learn more about probability click here:

brainly.com/question/29221515

#SPJ11

The results from the random sample provide an estimate of the overall population's opinion on the county leash law change, but there is still a small possibility that the true proportion lies outside this range.

Based on the information provided, a political action committee conducted a survey to estimate the proportion of county residents who support a change to the county leash law.

They took a random sample of 600 residents and found that 30% supported the change, with a margin of error of 4% at a 95% confidence level.
This implies that the committee is 95% confident that the true proportion of county residents who support the change to the leash law lies within the range of 26% to 34% (30% ± 4%).

For similar question on population's.

https://brainly.com/question/30396931

#SPJ11

The value of x from the given right triangle is 10 units.

Consider triangle ABC and triangle BDC.

Here, ∠ABC=∠BDC=90°

∠BCD=∠BCA (Reflexive angle)

By AA similarity ΔABC is similar to ΔBDC

We know that, when two triangles are similar their corresponding sides will be in ratio.

Now, x/20 = 5/x

x²=100

x=√100

x=10 units

Therefore, the value of x from the given right triangle is 10 units.

To learn more about the similar triangles visit:

https://brainly.com/question/25882965.

#SPJ1

18 mm is the height of the cone.

Volume, which is measured in cubic units, is the 3-dimensional space occupied by matter or encircled by a surface. The cubic meter (m³), a derived unit, is the SI unit of volume. Volume is another word for capacity.

We can use the formula for the volume of a cone to solve for the height:

V = (1/3)πr²h

where V is the volume, r is the radius, and h is the height.

Substituting the given values, we have:

1884 = (1/3)π(10²)h

Simplifying, we get:

h = 1884 / [(1/3)π(10²)]

h ≈ 18

Therefore, the height of the cone is approximately 18 mm.

Learn more about Volume here:

https://brainly.com/question/1578538

#SPJ1

Complete question:

the volume of this cone is 1,884 cubic millimeters. What is the height of this cone when the radius is 10 mm? Use 3.14 and round your answer to the nearest hundredth

From the top of a lighthouse 60 meters high with its base at the sea level, the angle of depression of a boat is 15 degrees. So, the distance of the boat from the foot of the lighthouse is approximately 224.65 meters.

Hi! To find the distance of the boat from the foot of the lighthouse, given a 60-meter high lighthouse, an angle of depression of 15 degrees, and the base at sea level, follow these steps:
1. Recognize that the angle of depression is the same as the angle of elevation from the boat's perspective.
2. Create a right triangle with the lighthouse as the vertical side, the distance of the boat as the base, and the line connecting the top of the lighthouse to the boat as the hypotenuse.
3. Use the tangent function with the angle of elevation and the height of the lighthouse:
  tan(15°) = opposite/adjacent = 60m / distance
4. Solve for the distance:
  distance = 60m / tan(15°)
Using a calculator, we find that the distance of the boat from the foot of the lighthouse is approximately 224.65 meters.

Learn more about the distance at: https://brainly.com/question/12319416

#SPJ11