A 100g block of pine wood has a volume of 300 cm3. Would this block float on water (density of water is 1.0 g/cm3)?

Answer:

The enthalpy of vaporization of a given substance is much greater than its enthalpy of fusion because it takes more energy to completely separate molecules (c

Answer:

2.053812097286304 mol

Given the data from the question, the astronauts do not have enough sodium hydroxide in the cabin to cleanse the cabin air of the carbon dioxide.

2NaOH + CO₂ —>Na₂CO₃ + H₂O

Molar mass of NaOH = 40 g/mol

Mass of NaOH from the balanced equation = 2 × 40 = 80 g

Molar mass of CO₂ = 44 g/mol

Mass of CO₂ from the balanced equation = 1 × 44 = 44 g

SUMMARY

From the balanced equation above,

44 g of CO₂ required 80 g of NaOH

From the balanced equation above,

44 g of CO₂ required 80 g of NaOH

Therefore,

3000 g of CO₂ will require = (3000 × 80) / 44 = 5454.55 g of NaOH

From the calculation made above, we can see that 5454.55 g of NaOH is needed by the astronaut to clean the cabin air but unfortunately, they only have 5000 g of NaOH.

Thus, we can conclude that the astronauts do not have enough NaOH to clean the air

Learn more about stoichiometry:

https://brainly.com/question/14735801

Answer:

chemical change i think

Explanation:

As the drops of vinegar fall through the oil to the bottom of the bottle, it reacts with the baking soda to make carbon dioxide gas. These bubbles attach themselves to the colored vinegar and cause them to float to the surface. When the bubbles pop, the color sinks back to the bottom of the bottle.

If a geologist drips a small amount of vinegar (acetic acid) onto a sample of dolomite, fizzing will occur because carbon dioxide is produced.

Effervescence observes whenever any gas tried to escape out from an aqueous solution, that's why CO₂ show effervescence.

Reaction between dolomite and acetic acid will be represented as:

MgCO₃ + 2CH₃COOH → CO₂ + H₂O + Mg(CH₃COO)₂

From the above reaction it is clear that carbon dixide gas is produced by showing the effervescence and fizzing behavior.

Hence, option (2) is correct.

To know more about dolomite, visit the below link:

https://brainly.com/question/4945288

Answer:

B

Explanation:

on edge2022

Answer:

a transverse electric wave and a magnetic transverse wave that are perpendicular and are moving in the same direction.

Explanation:

hope this helps!

Answer:

Teflon

Explanation:

1nm=10^-6 cm.

476 nm = 4.76E-5 cm

D. explosion

When a cracker is lit, a rapid response results in the development of large amount of energy of heat, light, and sound. Explosion is the term for such a reaction.

Answer:

D. Explosion

Explanation:

Here, we want to identify the type of combustion characterized by the given properties

From what we have, there is a sudden reaction that takes place as the cracker is ignited

The type of combustion here is called Explosion

It takes place suddenly with the evolution of light, heat, and sound upon ignition.

Hope this helps!

If you have any queries please ask.

Answer:

it is a liquid that is made from the combination of a liquid and a solid.

Explanation:

When these two states of matter are ground and mixed together, they form one state that is liquid

Answer:

Solid and liquid

Explanation:

Solid= ice cream or ice

Liquid= milk

these are common things used in a milkshake

Answer:

Specific chemical sugar glucose

Explanation:

When we say “blood sugar,” we mean the specific chemical sugar glucose. Diabetes is all about glucose. There lots of sugars….table sugar is sucrose, malt sugar is maltose, milk sugar is lactose, and you’ve probably heard of fructose.

Blood sugar, or glucose, is the main sugar found in your blood. It comes from the food you eat, and is your body's main source of energy. Your blood carries glucose to all of your body's cells to use for energy.

Pls mark me brainiest and my name is Misty.

Answer: The color that will appear when the nichrome wire is properly cleaned and introduced into flame would be orange

Triangles may be regarded as similar or congruent on the following basis;

1) Side angle side (SAS)

2) Side side side (SSS)

3) Angle Angle side (AAS)

A triangle is a three sided figure. The figures are not shown here. However, two triangle may be regarded as similar or congruent by the following conditions;

1) Side angle side (SAS)

2) Side side side (SSS)

3) Angle Angle side (AAS)

Since the triagles are not shown here, the similarity of the triangles can not be established.

Learn more about triangles: https://brainly.com/question/25813512

Answer:

Well, by definition,

molarity = moles of solute

               volume of solution

Explanation:

Now the moles of solute are a constant. The volume of solution MAY change substantially with increasing or decreasing temperature. In some calculations molality is used in preference, which is defined by the quotien

Hope this helps!

Solar energy is a viable alternative energy resource due to its high usage application.

The solar energy is considered as a viable alternative energy resource because this energy can used in the form of electricity for operating all electrical devices present in our homes.

So we can conclude that solar energy is a viable alternative energy resource due to its high usage application.

Learn more about energy here: https://brainly.com/question/13881533

Answer:

It has an endless supply is the answer.

Mass is the measure of the quantity of the substance present in the sample containing a compound or molecule. The mass of sucrose in the sample is 171 g.

The mass of the compound in the sample is the product of the number of moles of the substance and the molar mass of the compound.

Given,

The molar mass of the sucrose compound = 342.3 g/mol

Number of moles of sucrose = 0.500 moles

Mass of sucrose is calculated as:

[tex]\begin{aligned}\rm mass &= \rm moles \times molar \; mass\\\\&= 0.500 \;\rm moles \times 342.3 \;\rm g/mol\\\\&= 171.15 \;\rm gm\end{aligned}[/tex]

Therefore, option A. 171 gm is the mass of sucrose.

Learn more about mass here:

https://brainly.com/question/4058235

The correct answer is option A: 171 grams

Explanation: Got 90% on the quiz on edge and got this answer right

Answer:

absorbed

Explanation:

Different colors of light can be reflected or absorbed and that determines color. For instance an object that absorbs every color but green will appear green to the human eye.

Answer:

Its would be a very low C or a high D

Explanation:

Depending on what your teacher says or if you only got part of a question wrong it would be a very low C or a high D.

Given the pressure in KPa, the value of the pressure reading in torr obtained is 20.73 torr

101.325 KPa = 760 torr

The value of the pressure in torr can be obtained as illustrated below:

101.325 KPa = 760 torr

Therefore,

2.76324 KPa = (2.76324 × 760) / 101.325

2.76324 KPa = 20.73 torr

Thus, 2.76324 KPa is equivalent to 20.73 torr

Learn more about conversion:

https://brainly.com/question/2139943

Yes, we can dissolve 35 moles of KMnO₄ into 500 mL of water to give a molarity of 70 M

Molarity is defined as the mole of solute per unit litre of solution. Mathematically, it can be expressed as:

Molarity = mole / Volume

Molarity = mole / Volume

Molarity = 35 / 0.5

Molarity = 70 M

Learn more about molarity:

https://brainly.com/question/9468209

We can not dissolve 35 moles of potassium permanganate into 500 ml of water as it produces the solution with higher molarity than water have.

Molarity of any solution is define as the number of moles of solute present in per liter of the solvent as:

M = n/V

The molarity of the solvent, water, is the highest for aqueous solutions and molarity of 1000g of pure water in 1 liter is 55.5M

Given that,

On putting values, we get

M = 35/0.5 = 70M

Preparation of this solution is impossible.

Hence, KMnO₄ will not dissolve in the water as it produces solution with higher molarity than water.

To know more about molarity, visit the below link:
https://brainly.com/question/10608366

#SPJ4

Answer:

A salt metathesis reaction, sometimes called a double displacement reaction, is a chemical process involving the exchange of bonds between two reacting chemical species which results in the creation of products with similar or identical bonding affiliations.

Explanation:

From: Wikipedia

(a) When more gas is added, the number of moles of the gas increases, and  the total pressure of gas inside same vessel will increase.

(b) When the conatiner's volume is increased, the total pressure of gas inside the vessel will decrease.

The ideal gas law of general gas equation, can be used to describe the behavior of an ideal gas.

The ideal gas law is given as;

PV = nRT

where;

When more gas is added, the number of moles of the gas increases, and  the total pressure of gas inside same vessel will increase.

When the conatiner's volume is increased, the total pressure of gas inside the vessel will decrease.

Learn more about ideal gas law here: https://brainly.com/question/12873752

Based on the observations of the students, the soil they observed appears to be a sandy soil.

What is Foamy?

Foamy refers to the presence of bubbles or foam in a liquid or substance. It can be caused by a variety of factors, such as agitation, the presence of certain chemicals, or the release of gases. In the context of the soil observation mentioned earlier, the lack of foamy reaction with vinegar suggests that the soil does not contain a significant amount of carbonates, which are a common cause of foaming when they react with acids.

Evidence to support this includes the fact that the soil is gritty when dry and sticks to their fingers when wet, which are both common characteristics of sandy soil. Additionally, the observation that the soil does not get foamy with vinegar suggests that it does not contain a lot of organic matter, which is another characteristic of sandy soil. Finally, the fact that the damp soil made a ball but it fell apart quickly suggests that the soil does not have a lot of clay, which is another characteristic of sandy soil.

Learn more about Foamy from the given link

https://brainly.com/question/17627356

#SPJ1

Answer:

b is the answer

Entropy is the degree of disorder of a system. The entropy of b is 168.95  j/mol ･k.

The term entropy refers to the degree of disorder in a system. We have to know that the change in entropy of a system is the entropy of the product minus the entropy of the reactants.

Hence;

-277. 1 = [2(b) - 3(205. 0)

-277. 1  = 2b - 615

b= -277. 1 + 615/2

= 168.95  j/mol ･k

The entropy of b is 168.95  j/mol ･k.

Learn more about entropy: https://brainly.com/question/13146879

Answer:

25% is left   15 gm

Explanation:

(1/2)^2 = 25%

Answer:

b. 25% unchanged and 75% stable

Explanation:

got it right on edge