Answer: A 100-lb child stands on a scale while riding in an elevator. Then, the scale reading approaches to 100lb, while the elevator slows to stop at the lowest floor
Explanation: To find the correct answer, we need to know more about the apparent weight of a body in a lift.
What is the apparent weight of a body in a lift?Consider a body of mass m kept on a weighing machine in a lift.The readings on the machine is the force exerted by the body on the machine(action), which is equal to the force exerted by the machine on the body(reaction).The reaction we get as the weight recorded by the machine, and it is called the apparent weight.How to solve the question?Here we have given with the actual weight of the body as 100lbs.This 100lb child is standing on the scale or the weighing machine, when it is riding .During this condition, the acceleration of the lift is towards downward, and thus, a force of ma .There is also mg downwards and a normal reaction in the upward direction.when we equate both the upward force and downward force, we get,[tex]ma=mg-N\\N=mg-ma[/tex] i.e. during riding the scale reads a weight less than that of actual weight.
When the lift goes slow and stops the lowest floor, then the acceleration will be approaches to zero.Thus, from the above explanation, it is clear that ,when the elevator moves to the lowest floor slowly and stops, then the apparent weight will become the actual weight.
Learn more about the apparent weight of the body in a lift here:
https://brainly.com/question/28045397
#SPJ4
Various radial distances on a rotating disc have ______ linear velocities and _______ angular velocities.
a.. equal, equal
b. different, different
c. equal, different
d. different, equal
Various radial distances on a rotating disc have equal linear velocities and different angular velocities. So the correct option is C.
As a rotating disc spins, different points on its surface move at different speeds. This is because the linear velocity of a point on the disc depends on its radial distance from the center of the disc. Points closer to the center of the disc have a smaller radial distance and therefore a smaller linear velocity than points farther away from the center.
On the other hand, the angular velocity of all points on the rotating disc is the same. Angular velocity is a measure of how quickly an object rotates about an axis and is independent of the object's radial distance from the center.
This difference in linear velocity and angular velocity among points on a rotating disc can be observed in many real-life situations, such as the rotation of a vinyl record, a hard drive, or a turbine.
Learn more about angular velocity here:
https://brainly.com/question/29557272
#SPJ11
what force (in n) must be exerted on the master cylinder of a hydraulic lift to support the weight of a 2300 kg car (a large car) resting on the slave cylinder? the master cylinder has a 2.10 cm diameter, while the slave has a 24.0 cm diameter.
A force of approximately 196.95 Newtons must be exerted on the master cylinder of the hydraulic lift to support the weight of the car on the slave cylinder.
To determine the force required to support the weight of the car on the master cylinder of a hydraulic lift, we can use Pascal's principle, which states that the pressure applied to an enclosed fluid is transmitted undiminished to all portions of the fluid and the walls of its container.
We can start by calculating the force exerted by the car on the slave cylinder, using the formula:
Force_slave = weight_of_car
The weight of the car can be calculated using the formula:
weight_of_car = mass_of_car × gravitational_acceleration
Given that the mass of the car is 2300 kg and the gravitational acceleration is approximately 9.8 m/s^2, we can calculate:
weight_of_car = 2300 kg × 9.8 m/s^2 = 22,540 N
Now, we can use Pascal's principle to determine the force required on the master cylinder. The pressure in the hydraulic system is the same in both the master and slave cylinders. We can calculate the pressure in the system using the formula:
Pressure = Force / Area
Since the area is directly proportional to the square of the diameter, we can use the following relationship:
(Area_slave / Area_master) = (diameter_slave^2 / diameter_master^2)
Plugging in the values given:
(Area_slave / Area_master) = (24.0 cm)^2 / (2.10 cm)^2 = 114.49
Now, we can determine the force on the master cylinder using the formula:
Force_master = Pressure × Area_master
Rearranging the formula, we have:
Force_master = Force_slave × (Area_master / Area_slave)
Substituting the values we've calculated:
Force_master = 22,540 N × (1 / 114.49) = 196.95 N
Learn more about force here:-
https://brainly.com/question/30507236
#SPJ11
When a bicycle pump was sealed at the nozzle and the handle slowly pushed towards the nozzle the pressure of the air inside increased . Explain the observation
As the handle compresses air inside the sealed pump, the volume decreases, causing the pressure to increase according to Boyle's Law.
The observation of increased pressure when the handle is pushed towards the nozzle in a sealed bicycle pump can be explained using Boyle's Law.
Boyle's Law states that the pressure of a gas is inversely proportional to its volume, provided that the temperature and the amount of gas remain constant.
In this case, as the handle is pushed, the volume of air inside the pump decreases.
As the volume decreases, the air molecules are forced into a smaller space, leading to more frequent collisions between them and the walls of the pump.
This results in an increase in pressure inside the pump.
For more such questions on volume, click on:
https://brainly.com/question/14197390
#SPJ11
A particular radioactive sample undergoes 2.90times10^6 decays/s. What is the activity of the sample in curies? Part B What is the activity of the sample in becquerels?
The activity of the sample is 7.84 x [tex]10^{-5[/tex]curies.the activity of the sample is 2.90 x [tex]10^6[/tex] becquerels.
Part A:
The activity of a radioactive sample is measured in curies (Ci), where 1 Ci = 3.7 x [tex]10^{10[/tex]decays/s.
Given that the sample undergoes 2.90 x [tex]10^6[/tex]decays/s, we can calculate the activity in curies as follows:
Activity in Ci = (2.90 x [tex]10^6[/tex] decays/s) / (3.7 x [tex]10^{10[/tex]decays/s/Ci)
Activity in Ci = 7.84 x[tex]10^{-5[/tex] Ci
Therefore, the activity of the sample is 7.84 x [tex]10^{-5[/tex]curies.
Part B:
The activity of a radioactive sample is also measured in becquerels (Bq), where 1 Bq = 1 decay/s.
Given that the sample undergoes 2.90 x [tex]10^6[/tex] decays/s, we can calculate the activity in becquerels as follows:
Activity in Bq = 2.90 x[tex]10^6[/tex] decays/s
Therefore, the activity of the sample is 2.90 x [tex]10^6[/tex] becquerels.
Learn more about radioactive here:
https://brainly.com/question/9674119
#SPJ11
consider the reaction and its rate law. 2a 2b⟶productsrate=[b] 2a 2b⟶productsrate=k[b] what is the order with respect to a?
2a 2b⟶productsrate=[b] 2a 2b⟶productsrate=k[b] , 1 is the order with respect to a.
To determine the order with respect to a in the given reaction, we need to perform an experiment where the concentration of a is varied while keeping the concentration of b constant, and measure the corresponding reaction rate.
Assuming that the reaction is a second-order reaction with respect to b, the rate law can be expressed as rate=k[b]^2. Now, if we double the concentration of a while keeping the concentration of b constant, the rate of the reaction will also double. This indicates that the reaction is first-order with respect to a.
Therefore, the order with respect to a is 1.
In summary, to determine the order of a particular reactant in a reaction, we need to vary its concentration while keeping the concentration of other reactants constant, and measure the corresponding change in reaction rate. In this case, the order with respect to a is 1.
To know more about reaction visit:
brainly.com/question/28270550
#SPJ11
during play of a hole, player a accidentally hits player b's ball and as a result, player b hits player a's ball. what is the ruling?
In golf, when Player A accidentally hits Player B's ball and as a result, Player B hits Player A's ball, the ruling depends on whether the players' balls were at rest or in motion before the accidental collision occurred.
Let's consider both scenarios:
1. If the balls were at rest: If both Player A's and Player B's balls were at rest before the accidental collision, Rule 9.6 in the Rules of Golf applies. According to this rule, when a player's ball at rest is moved by another ball in motion after a stroke, the player must replace their ball to its original position without penalty. Both players would need to return their balls to their original positions before continuing play.
2. If the balls were in motion: If either Player A's or Player B's ball was in motion before the accidental collision occurred, Rule 11.1 in the Rules of Golf applies. This rule addresses the situation when a player's ball in motion is accidentally deflected or stopped by another ball. In this case, the players generally play their balls as they lie. However, if there was a deliberate action or agreement between the players to purposely cause the balls to collide, it could be considered a breach of Rule 1.3a (2), which prohibits actions that deliberately interfere with the play of another player. The players would need to discuss the situation, and penalties could be assessed if necessary.
It is important for the players involved to communicate and come to an agreement on how to proceed, and if necessary, they can consult with a rules official or refer to the specific Rules of Golf for further guidance.
To know more about golf here
https://brainly.com/question/30298587
#SPJ4
Starting with a 100-foot-long stone wall, a farmer would like to construct a rectangular enclosure by adding 700 feet of fencing, as shown in the figure to the right. Find the values of x and w that result in the greatest possible area. 100 feet x= w= ft ft
Therefore, the values of x and w that result in the greatest possible area are x = 100 feet and w = 600 feet.
To find the values of x and w that result in the greatest possible area, we can use the formula for the area of a rectangle, which is A = lw, where l is the length and w is the width.
We know that the perimeter of the rectangle is 100 + 700 = 800 feet, so we can write an equation for the perimeter in terms of x and w:
2x + w = 800
We want to maximize the area, so we can write an equation for the area in terms of x and w:
A = lw = x(800 - 2x - w) = 800x - 2x^2 - wx
To find the values of x and w that maximize the area, we can use calculus. We take the derivative of A with respect to x and set it equal to zero:
dA/dx = 800 - 4x - w = 0
We also need an equation relating w and x, which we can get from the perimeter equation:
w = 800 - 2x
We can substitute this into the derivative equation to get:
800 - 4x - (800 - 2x) = 0
Simplifying this, we get:
2x = 200
x = 100
Substituting this value of x into the equation for w, we get:
w = 800 - 2x = 600
To know more about value,
https://brainly.com/question/30994946
#SPJ11
A monatomic ideal gas is held in a thermally insulated container with a volume of 0.0900m^(3) . The pressure of the gas is 110 kPa, and its temperature is 307K . Part A) To what volume must the gas be compressed to increase its pressure to 150 kPa? Part B)
The gas must be compressed to a volume of 0.066 [tex]m^3[/tex] to increase its pressure to 150 kPa.
We can use the ideal gas law to solve this problem, which relates the pressure, volume, and temperature of an ideal gas:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
Assuming that the number of moles and the gas constant remain constant, we can write:
[tex]P_1V_1/T_1 = P_2V_2/T_2[/tex]
where the subscripts 1 and 2 denote the initial and final states of the gas, respectively.
Part A:
We want to find the new volume [tex]V_2[/tex] when the pressure is increased to 150 kPa. We can set up the equation as follows:
(110 kPa)(0.0900 [tex]m^3[/tex])/(307 K) = (150 kPa)V2/(307 K)
Solving for [tex]V_2[/tex], we get:
[tex]V_2[/tex] = (110 kPa)(0.0900[tex]m^3[/tex])/(150 kPa) = [tex]0.066 m^3[/tex]
Therefore, the gas must be compressed to a volume of 0.066 m^3 to increase its pressure to 150 kPa.
To know more about pressure refer here :
https://brainly.com/question/945436
#SPJ11
which of the following is evidence that the formation process of our Galaxy may have included collisions with smaller neighbor galaxies?
the existence of supernova remnants, such as the Crab Nebula, in the Galaxy's disk
the observation that objects outside the orbit of the Sun are moving around the Galaxy faster than we expected
the presence of millions of new stars, recently formed from clouds of gas and dust
the observation of long moving streams of stars that continue to orbit through our Galaxy's halo the observation that globular cluster are arranged in a spherical "halo" around the Galaxy
The following evidence that the formation process of our Galaxy may have included collisions with smaller neighbor galaxies is b. the observation of long moving streams of stars that continue to orbit through our Galaxy's halo.
These streams of stars are remnants of disrupted satellite galaxies and globular clusters that have been torn apart by the gravitational forces of the Milky Way. As these smaller systems collide and merge with our Galaxy, they create streams of stars that can be traced back to their original structures. These interactions contribute to the growth and evolution of the Milky Way, providing new stars, gas, and dust.
Additionally, the observation that globular clusters are arranged in a spherical "halo" around the Galaxy further supports this theory, as these clusters are thought to be relics from the early stages of galaxy formation and could have been captured during past galactic collisions. So therefore the correct answer is b. the observation of long moving streams of stars that continue to orbit through our Galaxy's halo.
Learn more about Milky Way at
https://brainly.com/question/30714548
#SPJ11
derive the two expressions given in the introduction for the position of the bright integerence fingres. wht approximations have been made?
The two expressions for the position of the bright interference fringes are, (i) y = mλD/d and (ii) y = (m + 1/2)λD/d.The assumptions of coherent sources, constant phase relationship, and equal path lengths are made in the derivation of these expressions.
Interference fringes are observed when light waves from two coherent sources are superimposed. The positions of these fringes can be calculated using the equations:
y = mλD/d and y = (m + 1/2)λD/d
where y is the distance from the central maximum to the mth or (m + 1/2)th fringe, λ is the wavelength of light, D is the distance from the sources to the screen, d is the distance between the sources, and m is an integer representing the order of the fringe.
These expressions can be derived using the assumption that the sources emit light waves that are coherent and have a constant phase relationship, meaning that the peaks and troughs of the waves from each source align with each other. The waves from each source also travel the same distance to the screen, and thus experience the same phase shift.
Using these assumptions, the resultant wave can be calculated using the principle of superposition. When the waves from the two sources interfere constructively, a bright fringe is observed. The first expression for the position of the fringes, y = mλD/d, corresponds to the positions of the bright fringes where the waves interfere constructively.
When the waves interfere destructively, a dark fringe is observed. The second expression for the position of the fringes, y = (m + 1/2)λD/d, corresponds to the positions of the dark fringes where the waves interfere destructively.
Overall, the assumptions of coherent sources, constant phase relationship, and equal path lengths are made in the derivation of these expressions.
Learn more about phase shift at: https://brainly.com/question/10596359
#SPJ11
how much energy is absorbed in heating 30.0 g of water from 0.0°c to 100.0°c? does changing the rate at which heat is added to the water from 50 j/s to 100 j/s affect this calculation? explain.
The energy absorbed by 30.0 g of water in heating it from 0.0°C to 100.0°C is 12.7 kJ. Changing the rate at which heat is added from 50 J/s to 100 J/s does not affect this calculation since the energy required to raise the temperature of a substance is independent of the rate at which it is added.
In more detail, the energy absorbed in heating a substance is given by the equation Q = mCΔT, where Q is the energy absorbed, m is the mass of the substance, C is the specific heat capacity of the substance, and ΔT is the change in temperature. For water, the specific heat capacity is 4.18 J/g°C. Therefore, the energy absorbed in heating 30.0 g of water from 0.0°C to 100.0°C is:
Q = (30.0 g)(4.18 J/g°C)(100.0°C - 0.0°C) = 12,540 J = 12.7 kJ
Changing the rate at which heat is added, such as from 50 J/s to 100 J/s, does not affect the amount of energy required to raise the temperature of the water since the energy required is dependent only on the mass, specific heat capacity, and temperature change of the substance, and is independent of the rate at which it is added.
Learn more about energy absorbed here;
https://brainly.com/question/31595217
#SPJ11
what is the number of the highest harmonic that may be heard by a person who can hear frequencies from 20 hz to 20000 hz?
The highest harmonic that may be heard by a person who can hear frequencies from 20 Hz to 20,000 Hz is the 100th harmonic (H₁₀₀).
The human auditory system can perceive sounds within a frequency range of 20 Hz to 20,000 Hz. The fundamental frequency (first harmonic) is the lowest frequency that can be heard, and the highest frequency that can be perceived is determined by the limit of human hearing.
Harmonics are multiples of the fundamental frequency, and their frequency values increase with each multiple. Therefore, the frequency of the nth harmonic is given by n times the fundamental frequency.
To determine the highest harmonic that can be heard, we need to find the harmonic whose frequency is closest to the upper limit of human hearing, which is 20,000 Hz.
Setting n times the fundamental frequency equal to 20,000 Hz, we get:
n × 20 Hz = 20,000 Hz
Solving for n, we get:
n = 20,000 Hz / 20 Hz = 1000
Therefore, the 1000th harmonic can be heard, but it is not audible as a distinct sound because it is too high-pitched. The highest audible harmonic is the 100th harmonic, whose frequency is 100 times the fundamental frequency:
100 × 20 Hz = 2000 Hz
Therefore, the highest harmonic that can be heard by a person with normal hearing is the 100th harmonic (H₁₀₀).
Learn more about frequency here:
https://brainly.com/question/12320829
#SPJ11
Q11. What fraction is:
(a) 4 months of 2 years?
(c) 15 cm of 1 m?
(b) 76 c of $4.00?
(d) 7 mm of 2 cm?
Answer:
a)[tex]\frac{4}{24}[/tex]
b)[tex]\frac{15}{100}[/tex]
c)[tex]\frac{76}{400}[/tex]
d)[tex]\frac{7}{20}[/tex]
The cord, which is wrapped around the disk, is given an acceleration of a = (10t) m/s², where t is in seconds. Starting from rest, determine the angular displacement, angular velocity, and angular acceleration of the disk when t = 3 s. a = (10) m/s 0.5 m
When t = 3 s, the angular displacement of the disk is 45 rad, the angular velocity is 30 rad/s, and the angular acceleration is 20 rad/s².
To find the angular displacement, we need to use the formula θ = ½ αt², where α is the angular acceleration. Plugging in the given values, we get θ = ½ (10(3)²) = 45 rad.
Next, to find the angular velocity, we can use the formula ω = ω0 + αt, where ω0 is the initial angular velocity. Since the disk starts from rest, ω0 = 0. Plugging in the values, we get ω = 10(3) = 30 rad/s.
Finally, to find the angular acceleration, we can simply use the given value of a = 10t m/s² and divide by the radius of the disk (0.5 m), giving us an angular acceleration of 20 rad/s².
To know more about acceleration visit:
brainly.com/question/30660316
#SPJ11
A square wire loop is in a time-varying magnetic field with magnitude B(t)=At, where A>0. The plane in which the square is located has an angle θ(<90∘)with the direction of the magnetic field. In what direction does the induced current flow in the loop?A). Counterclockwise when viewing from above on the front and back segments, clockwise in the sides.B). Clockwise when viewing from above on the front and back segments, counterclockwise in the sides.C). Counterclockwise when viewed from above.D). Clockwise when viewed from above.
The direction of the induced current in the square wire loop in a time-varying magnetic field with magnitude B(t)=At, where A>0 and the plane of the square makes an angle θ(<90∘) with the direction of the magnetic field, is counterclockwise when viewed from above on the front and back segments and clockwise in the sides, as stated in option A).
It is given by Faraday's law of induction, which states that the magnitude of the induced emf is proportional to the rate of change of magnetic flux through the loop. In this case, the magnetic field is changing with time, so the magnetic flux through the loop is also changing, inducing an emf in the loop.
The induced current in the loop will flow in a direction that produces a magnetic field that opposes the change in the magnetic flux through the loop. From Lenz's law, we can determine the direction of the induced current. As the magnetic field increases in the upward direction, the current will flow in a direction that produces a magnetic field in the downward direction. Similarly, as the magnetic field decreases, the current will flow in a direction that produces a magnetic field in the upward direction.
Therefore, the induced current will flow counterclockwise when viewing from above on the front and back segments and clockwise in the sides, which is option A).
To know more about the induced current refer here :
https://brainly.com/question/26898099#
#SPJ11
the armature of a small generator consists of a flat, square coil with 170 turns and sides with a length of 1.60 cm. the coil rotates in a magnetic field of 8.95×10−2 t.
The armature of the small generator is a flat, square coil with 170 turns and sides measuring 1.60 cm in length, which rotates in a magnetic field of 8.95×10−2 T.
The armature is the rotating part of the generator which produces electrical energy through electromagnetic induction. In this case, the armature is a flat, square coil with 170 turns, meaning that the coil has 170 loops of wire. The sides of the coil have a length of 1.60 cm each. As the armature rotates, it moves through a magnetic field of 8.95×10−2 T, which causes a current to flow in the coil due to the changing magnetic field. This current can be used to power electrical devices or stored in a battery for later use.
Calculate the area of the square coil: A = side^2
A = (1.60 cm x 10^-2 m/cm)^2 = 2.56 x 10^-4 m^2
2. Given the number of turns (N) = 170 and the magnetic field (B) = 8.95 x 10^-2 T, we can find the maximum induced EMF using Faraday's Law of electromagnetic induction:
EMF_max = NABω (where ω is the angular velocity in radians per second).
To know more about magnetic field visit:
https://brainly.com/question/23096032
#SPJ11
a station emits 2000 kilohz --what is its wavelength?
The wavelength of a station emitting 2000 kHz is approximately 150 meters.
To calculate the wavelength of a station emitting 2000 kHz, we'll use the formula for the relationship between frequency (f) and wavelength (λ):
Speed of light (c) = frequency (f) × wavelength (λ)
First, convert the frequency from kHz to Hz:
2000 kHz = 2,000,000 Hz
Next, we'll use the speed of light, which is approximately 3.00 × 10^8 meters per second (m/s).
Rearrange the formula to find the wavelength:
λ = c / f
Now, plug in the values:
λ = (3.00 × 10^8 m/s) / (2,000,000 Hz)
Finally, calculate the wavelength:
λ ≈ 150 meters
So, the wavelength of a station emitting 2000 kHz is approximately 150 meters.
Learn more about wavelength
brainly.com/question/31143857
#SPJ11
An n-input NMOS NOR gate has Ks = 4mA/V2, KL=2 mA/V2, VT=1.0V, VDD=5.0V Find the approximate values for VOH and VOL for n = 1,2 and 3 inputs. Assume QL=sat and Qs= ohmic, V= VoH
For an n-input NMOS NOR gate with Ks = 4mA/V², KL = 2 mA/V², VT = 1.0V, VDD = 5.0V, and assuming QL is in saturation and Qs is ohmic, the approximate values for VOH and VOL for n = 1, 2, and 3 inputs are as follows:
For n = 1 input, VOH ≈ 2.2V and VOL ≈ 0.6V.
For n = 2 inputs, VOH ≈ 3.4V and VOL ≈ 1.4V.
For n = 3 inputs, VOH ≈ 4.2V and VOL ≈ 2.6V.
The output voltage levels VOH and VOL for an n-input NMOS NOR gate can be estimated using the following equations:
VOH ≈ VDD - (nKL/2)(VGS - VT)²
VOL ≈ (nKs/2)(VGS - VT)²
where Ks and KL are the process transconductance parameters for the source and load transistors, respectively, VT is the threshold voltage, VGS is the gate-source voltage, and VDD is the supply voltage.
Assuming QL is in saturation, we can set VDS = VDSsat = VDD - VOH and solve for VGS to obtain the approximate value of VOH. Similarly, assuming Qs is ohmic, we can set VDS = VDD - VOL and solve for VGS to obtain the approximate value of VOL.
Using the given values of Ks, KL, VT, and VDD, we can calculate the values of VOH and VOL for n = 1, 2, and 3 inputs using the above equations. The results are as follows:
For n = 1 input, VOH ≈ 2.2V and VOL ≈ 0.6V.
For n = 2 inputs, VOH ≈ 3.4V and VOL ≈ 1.4V.
For n = 3 inputs, VOH ≈ 4.2V and VOL ≈ 2.6V.
These values can be used to design and analyze NMOS NOR gates in digital circuits.
To know more about ohmic refer here:
https://brainly.com/question/30901429#
#SPJ11
A positive point charge is initially at rest close to a bar magnet that is also at rest. The charge will (A) be attracted to the north pole of the magnet (B) be repelled by the north pole of the magnet (C) be attracted to the south pole of the magnet (D) be repelled by the south pole of the magnet (E) experience no magnetic force
A positive point charge is initially at rest close to a bar magnet that is also at rest. The charge will experience no magnetic force. The correct option is (E).
The charge will experience a force when placed in the vicinity of the bar magnet.
The force exerted on a charged particle due to a magnetic field is given by the Lorentz force law:
F = q(v × B),
where F is the force,
q is the charge,
v is the velocity of the particle, and
B is the magnetic field.
Since the charge is initially at rest, its velocity is zero, so the force on it will also be zero.
This can also be understood from the fact that a magnetic field only exerts a force on a moving charged particle. Since the charge is initially at rest, there is no force acting on it due to the magnetic field of the bar magnet.
It is worth noting, however, that if the charge were given an initial velocity, it would experience a magnetic force and be deflected in a direction perpendicular to both its velocity and the magnetic field direction.
To know more about "Lorentz force law" refer here:
https://brainly.com/question/15552911#
#SPJ11
a person looks horizontally at the edge of a 5.0-m-long swimming pool filled to the surface (index of refraction for water is 1.33). the maximum depth to which the observer can see is
The maximum depth to which the observer can see in the swimming pool is 2.1 meters.
The maximum depth to which an observer can see in a swimming pool filled to the surface depends on the refractive index of the water and the height of the observer above the water.
In this case, the observer is looking horizontally at the edge of a 5.0m-long pool filled to the surface, so we can assume that the height of the observer is negligible compared to the length of the pool. Therefore, we can use the simplified formula d = (1/2) * h * (n² - 1), where h = 0.
We know that the refractive index of water (n) is 1.33. Plugging this value into the formula, we get: d = (1/2) * 5.0m * (1.33² - 1) = 2.1m
This means that the observer can see objects located up to 2.1 meters deep in the pool when looking horizontally at the edge of the pool. It is worth noting that this calculation assumes ideal conditions, such as perfectly clear water and no obstructions to the observer's line of sight.
To know more about refractive index, refer here:
https://brainly.com/question/30761100#
#SPJ11
what sample period if required if we wish to sampe the function g(t) = sinc(2t) at 2 times the rate required to avoid aliasing
The minimum sample period required is:
T = 1 / (2 x 1) = 1/2 ( we need to sample g(t) every 0.5 units of time or twice per unit of time)
When we sample a continuous-time signal, we need to ensure that we do not encounter aliasing, which occurs when the sampling rate is not sufficient to accurately represent the original signal.
To avoid aliasing in the function g(t) = sinc(2t), we need to sample it at a rate that is twice the maximum frequency present in the signal.
In this case, the maximum frequency is 1 Hz (half the bandwidth of the sinc function), so we need to sample it at 2 Hz.
Therefore, the sample period required to avoid aliasing is 1/2 = 0.5 seconds.
This means that we need to take a sample of the function every 0.5 seconds to ensure that we obtain an accurate representation of the original signal without aliasing.
Learn more about frequency at https://brainly.com/question/14983964
#SPJ11
A camera has a lens (or combination of lenses) like the converging lens in this lab that focuses light from objects forming real images on a piece of film (like the screen in this lab). An enlarger shines light through a negative, and uses a lens to project a real image of the picture on the negative onto the platform where the photographic paper is placed. Explain how each of the following will affect your photographs.a. Half of the lens on your camera is covered by a piece of paper. b. The negative is placed in the enlarger with half of it covered by a piece of tape on the inside.c. Half of the lens on the enlarger is covered by a piece of paper. d. The camera lens is replaced by a diverging lens with the same focal length.
a. The image's uncovered side will have typical brightness and detail.
b. The image's uncovered side will have typical brightness and detail.
c. The uncovered side of the image will have typical brightness and detail.
d. The resulting image will be out of focus, with less clarity and detail.
a. If half of the lens on the camera is covered by a piece of paper, the amount of light entering the camera will be reduced. This will result in a darker image with less contrast and detail on the side of the image corresponding to the covered lens. The uncovered side of the image will have normal brightness and detail.
b. If the negative is placed in the enlarger with half of it covered by a piece of tape on the inside, the image projected onto the photographic paper will be darker and have less contrast and detail on the side corresponding to the covered part of the negative. The uncovered side of the image will have normal brightness and detail.
c. If half of the lens on the enlarger is covered by a piece of paper, the amount of light entering the enlarger will be reduced. This will result in a darker image with less contrast and detail on the side of the image corresponding to the covered lens. The uncovered side of the image will have normal brightness and detail.
d. If the camera lens is replaced by a diverging lens with the same focal length, the image formed by the lens will be a virtual image instead of a real image. This virtual image will not be focused on the photographic film and will be blurred and distorted. The resulting photograph will be out of focus and have reduced clarity and detail.
Learn more about converging lens on:
https://brainly.com/question/29771989
#SPJ11
Two identical spheres,each of mass M and neglibile mass M and negligible radius, are fastened to opposite ends of a rod of negligible mass and lenght 2L. This system is initially at rest with the rod horizontal, as shown above, and is free to rotate about a frictionless, horizontal axis through the center of the rod and perpindicular to the plane of th epage. A bug, of mass 3M, lands gently on the sphere on the left. Assume that the size of the bug is small compared to the length of the rod. Express all your answers in terms of M, L and physical constants. A) Determine the Torque after the bug lands on the sphere B) Determine the angular accelearation of the rod-sphere-bug system immediately after the bug lands When the rod is vertical C) the angular speed of the bug D) the angular momentum E) the magnitude and direction of the force that must be exerted on the bug by the sphere to keep the bug from being thrown off the sphere.
A) The torque on the system after the bug lands on the left sphere is 3MgL, where g is the acceleration due to gravity.
B) The angular acceleration of the rod-sphere-bug system immediately after the bug lands when the rod is vertical is (3g/5L).
C) The angular speed of the bug is (3g/5L)(L/2) = (3g/10), where L/2 is the distance from the axis of rotation to the bug.
D) The angular momentum of the system is conserved, so the initial angular momentum is zero and the final angular momentum is (3MgL)(2L) = 6MgL².
E) The force that must be exerted on the bug by the sphere to keep the bug from being thrown off the sphere is equal in magnitude but opposite in direction to the force exerted on the sphere by the bug. This force can be found using Newton's second law, which states that force equals mass times acceleration.
The acceleration of the bug is the same as the acceleration of the sphere to which it is attached, so the force on the bug is (3M)(3g/5) = (9Mg/5) and it is directed towards the center of the sphere. Therefore, the force exerted on the sphere by the bug is also (9Mg/5) and is directed away from the center of the sphere.
learn more about acceleration here:
https://brainly.com/question/2303856
#SPJ11
A proton is moving to the right in the magnetic field that is pointing into the page. what is the irection of the magnetic force on the proton?
The direction of the magnetic force on the proton is upward (perpendicular to both the proton's motion and the magnetic field).
To determine the direction of the magnetic force on the proton, we use the right-hand rule. First, point your right thumb in the direction of the proton's motion (to the right). Next, curl your fingers in the direction of the magnetic field (into the page). Your palm will be facing the direction of the force on a positive charge, like a proton. In this case, the magnetic force on the proton is pointing upward.
This is because the magnetic force acts perpendicular to both the charge's motion and the magnetic field, following the equation F = q(v x B), where F is the magnetic force, q is the charge, v is the velocity vector, and B is the magnetic field vector.
Learn more about magnetic force here:
https://brainly.com/question/31748676
#SPJ11
for an object whose velocity, in ft/sec is given by v(t) = cos(t), what is its distance, in feet, travelled on the interval t = 1 to t = 5? 0.75 0.29 1.8 2.20
The object travels approximately 0.12 feet on the interval t=1 to t=5.
To find the distance travelled by the object, we need to integrate the absolute value of the velocity function over the given interval.
The absolute value of the given velocity function is |cos(t)|. Integrating this over the interval t = 1 to t = 5, we get: ∫|cos(t)| dt from t=1 to t=5 = ∫cos(t) dt from t=1 to t=5, since cos(t) is positive on this interval = sin(t) from t=1 to t=5 = sin(5) - sin(1)
Using a calculator, sin(5) ≈ 0.96 and sin(1) ≈ 0.84, so: sin(5) - sin(1) ≈ 0.96 - 0.84 = 0.12. Therefore, the object travels approximately 0.12 feet on the interval t=1 to t=5.
To know more about velocity function, refer here:
https://brainly.com/question/12909528#
#SPJ11
ve takes 3.50 s to complete 8.00 complete oscillations, what is the period of the wave? A. 0.438 s B. 4.50 s C. 2.29 s
0.438 s is the period of the wave.
So, the correct answer is A.
To determine the period of the wave, we need to divide the total time taken (3.50 s) by the number of complete oscillations (8.00).
The period (T) is the time required for one complete oscillation.
T = total time / number of oscillations
T = 3.50 s / 8.00
T = 0.4375 s
Rounded to three decimal places, the period of the wave is 0.438 s, which corresponds to option A.
Your question is incomplete but most probably your full question was:
If a wave takes 3.50 s to complete 8.00 complete oscillations, what is the period of the wave?
a. 0.438 s
b. 4.50 s
c 2.29 s
Learn more about complete oscillations at
https://brainly.com/question/29149574
#SPJ11
Water is combination of:
O hydrogen and olygen
O hellum and oxygen
O oxygen and carbon
O carbon and hydrogen
Answer:
Oxygen and hydrogen
Explanation:
Oxygen and hydrogen
Microwaves (as used in microwave ovens, telephone transmission, etc.) are electromagnetic waves with wavelength of order 1 cm. Consider a microwave with wavelength of 1.25 cm. What is the energy of the microwave photon in eV? The so-called 3-K radiation from outer space consists of photons of energy k_BT, where T = 3K. What is the wavelength of this radiation?
The wavelength of the 3-K radiation from outer space is 4.85 x 10^-3 m or 4.85 mm.
The energy of a photon with a wavelength of 1.25 cm can be calculated using the formula:
E = hc/λ
where h is Planck's constant (6.626 x 10^-34 J s), c is the speed of light (2.998 x 10^8 m/s), and λ is the wavelength in meters. We need to convert the wavelength to meters:
1.25 cm = 0.0125 m
Substituting these values into the formula, we get:
E = (6.626 x 10^-34 J s) x (2.998 x 10^8 m/s) / (0.0125 m)
E = 1.59 x 10^-20 J
To convert this energy to electron volts (eV), we can use the conversion factor:
1 eV = 1.602 x 10^-19 J
Dividing the energy by this conversion factor, we get:
E = (1.59 x 10^-20 J) / (1.602 x 10^-19 J/eV)
E = 0.099 eV
Therefore, the energy of the microwave photon with a wavelength of 1.25 cm is 0.099 eV.
The energy of the 3-K radiation can be calculated using the formula:
E = k_B T
where k_B is the Boltzmann constant (1.381 x 10^-23 J/K) and T is the temperature in Kelvin. We can substitute the temperature T = 3 K into the formula:
E = (1.381 x 10^-23 J/K) x (3 K)
E = 4.143 x 10^-23 J
To find the wavelength of this radiation, we can use the formula:
E = hc/λ
Rearranging the formula to solve for λ, we get:
λ = hc/E
Substituting the values for h, c, and E, we get:
λ = (6.626 x 10^-34 J s) x (2.998 x 10^8 m/s) / (4.143 x 10^-23 J)
λ = 4.85 x 10^-3 m
To know more about conversion factor click here:
https://brainly.com/question/28366871#
#SPJ11
Calculate the angular distance (shortest distance) between the two locations given in A-F. In other words, how far apart are the given locations in degrees, minutes? Remember: 1° = 60 minutes, and 1 minute = 60 seconds. Always be mindful of what hemisphere you are in and when you have to cross hemispheres. Your answer will be an angular measurement with no cardinal direction. When typing your answers, be sure to enter a number in every box provided. If needed, type a "0" instead of leaving a box blank. 1. 10°N and 10°S 2. 10°E and 15°E 3. 10°30'S and 10°30'N 4. 55°15'W and 121°30'E 5. 66°30'S and 90°S 6.163°45'W and 121°15'W
To calculate the angular distance between two locations, their latitudes and longitudes are considered, accounting for whether they are in the same hemisphere or different hemispheres. The given locations have distances of 20 degrees, 5 degrees, 21 degrees, 176 degrees 45 minutes, 24 degrees 30 minutes, and 42 degrees 30 minutes.
So, we subtract the smaller value from the larger value and then take the absolute value. For example,
In question 1, the angular distance between 10°N and 10°S is 20°.
In question 2, the angular distance between 10°E and 15°E is 5°.
In question 3, the angular distance between 10°30'S and 10°30'N is 21,000', or 350°.
In question 4, we must convert both coordinates to the same hemisphere. To do this, we add 360° to the western coordinate and get 304°45'E. The angular distance between 55°15'W and 304°45'E is 120°.
In question 5, the angular distance between 66°30'S and 90°S is 23°30'.
In question 6, we must subtract the smaller coordinate from the larger coordinate and get 42°30'.
To know more about the angular distance refer here :
https://brainly.com/question/13275279#
#SPJ11
A heat engine has an efficiency of 35.0% and receives 150 J of heat per cycle.
(a) How much work does it perform in each cycle?
(b) How much heat does it exhaust in each cycle?
(a) The work performed by the heat engine in each cycle can be calculated using the formula for efficiency: Efficiency = Work output/Heat input. Rearranging this formula to solve for work output, we get:
Work output = Efficiency x Heat input
Substituting the given values, we get:
Work output = 0.35 x 150 J
Work output = 52.5 J
Therefore, the heat engine performs 52.5 J of work in each cycle.
(b) The heat exhausted by the heat engine in each cycle can be calculated by subtracting the work output from the heat input:
Heat exhausted = Heat input - Work output
Heat exhausted = 150 J - 52.5 J
Heat exhausted = 97.5 J
Therefore, the heat engine exhausts 97.5 J of heat in each cycle.
A heat engine is a device that converts thermal energy into mechanical energy. It works by taking in heat from a high-temperature source (such as a burning fuel) and using it to do work (such as turning a turbine). However, not all of the heat energy can be converted into work energy - some of it is always lost in the process. The efficiency of a heat engine is a measure of how much of the heat energy is converted into work energy. It is defined as the ratio of the work output to the heat input, expressed as a percentage. In this case, the heat engine has an efficiency of 35%, which means that 35% of the heat energy is converted into work energy, while the remaining 65% is lost as waste heat. To calculate the work output and heat exhausted, we use the formula for efficiency and the conservation of energy principle.
learn more about heat engine
https://brainly.com/question/28206778
#SPJ11