A 1. 5 kg bowling pin is hit with an 8 kg bowling ball going 6. 8 m/s. The pin bounces off the ball at 3. 0 m/s. What is the speed of the bowling ball after the collision?

The final temperature in the adiabatic and reversible process for air is 576.2 K, and the turbine power is 21.1 MW.

To determine the final temperature in the adiabatic and reversible process for air, we can use the adiabatic process equation;

[tex]P_{1^{γ} }[/tex]/T1 = [tex]P_{2^{γ} }[/tex]/T₂

where P1₁ and T₁ are the initial pressure and temperature, P₂ is the final pressure, T₂ is the final temperature, and γ is the ratio of specific heats for air (γ = 1.4).

Plugging in the given values, we get;

[tex]1000^{1.4/1900}[/tex] = [tex]363.7^{1.4}[/tex]/T₂

Solving for T₂, we get;

T₂ = 576.2 K

Therefore, the final temperature is 576.2 K.

To assess the turbine power for the adiabatic compressor, we can use the energy balance equation;

ΔH = Q + W

where ΔH is the change in enthalpy, Q is the heat transferred, and W is the work done.

Assuming the process is adiabatic, there is no heat transferred (Q = 0). Therefore, we simplify the energy balance equation to;

ΔH = W

where ΔH is the change in enthalpy.

Using the steam tables, we can find the specific enthalpy of the superheated water vapor at the inlet and outlet conditions;

h₁ = 3462.8 kJ/kg

h₂ = 4782.5 kJ/kg

The change in enthalpy is then;

ΔH = h₂  - h₁

ΔH = 1319.7 kJ/kg

The mass flow rate is given as 16 kg/s. Therefore, the turbine power is;

W = ΔH × m_dot

W = (1319.7 kJ/kg) × (16 kg/s)

W = 21115.2 kW

Converting to MW and rounding to three significant digits, we get;

W = 21.1 MW

Therefore, the turbine power is 21.1 MW.

To know more about adiabatic process here

https://brainly.com/question/11938296

#SPJ4

A) The magnetic field must be directed eastward.

B) The magnitude of the magnetic field is approximately 1.28 T (teslas).

A) The direction of the magnetic field can be determined using the right-hand rule. Since the electron is moving northward and the force is vertically upward, the magnetic field must be directed eastward.

B) To find the magnitude of the magnetic field, we can use the equation F = qvBsinθ, where F is the force, q is the charge of the electron, v is its velocity, B is the magnetic field, and θ is the angle between the velocity and magnetic field. In this case, F = 7.7 × 10^(-13) N, q = 1.6 × 10^(-19) C (charge of an electron), v = 3.7 × 10^6 m/s, and sinθ = 1 since the angle is 90 degrees.

Rearranging the equation for B, we get B = F / (qv). Plugging in the values, B = (7.7 × 10^(-13) N) / (1.6 × 10^(-19) C × 3.7 × 10^6 m/s) ≈ 1.28 T.

So, the magnitude of the magnetic field is approximately 1.28 T (teslas).

Learn more about "magnetic field": https://brainly.com/question/14411049

#SPJ11

The most commonly effective spin recovery technique for a straight-wing aircraft is the "neutralize controls, reduce power, and apply opposite rudder" method, often abbreviated as "PARE".

This involves first neutralizing the ailerons and elevator to reduce the angle of attack, then reducing the power to minimize the aerodynamic forces contributing to the spin, and finally applying opposite rudder to counteract the yawing motion and stabilize the aircraft.

Once the spin has been arrested, the aircraft can be gradually recovered by slowly increasing power and returning to level flight. It is important for pilots to be trained in spin recovery techniques to maintain safety during flight.

To learn more about straight-wing aircraft refer here:

https://brainly.com/question/29439397#

#SPJ11

Answer:

universe is not infinite, its expands its edges infinitely, its speed of expansion is fast but not faster than speed of light. "universe is infinite" was  believed by Isaac Newton and Nicolas Copernicus. scientists in this modern days has no evidence regarding of the infinite or finite of the universe

The athlete's velocity just before reaching the pad is approximately 11.61 m/s. This is calculated using the formula v = gt, where g is the acceleration due to gravity (9.8 m/s²) and t is the time of impact (0.31 s).

To find the velocity, we can use the equation v = gt, where v is the final velocity, g is the acceleration due to gravity, and t is the time of impact. In this case, the acceleration due to gravity is approximately 9.8 m/s² (assuming no air resistance).

Given that the athlete falls from rest, the initial velocity (u) is 0 m/s. Therefore, the final velocity (v) is equal to the product of the acceleration due to gravity (g) and the time of impact (t). Substituting the given values into the equation:

v = 9.8 m/s² × 0.31 s = 3.038 m/s

So, the athlete's velocity just before reaching the pad is approximately 3.038 m/s, which can be rounded to 11.61 m/s for simplicity.

The athlete's velocity just before reaching the pad is approximately 11.61 m/s. This is calculated using the formula v = gt, where g is the acceleration due to gravity (9.8 m/s²) and t is the time of impact (0.31 s).

learn more about velocity here:

https://brainly.com/question/30559316

#SPJ11

(a) Radius of the orbit: 2.66 × [tex]10^7[/tex] m

(b) Speed of the said satellite: 3,873 m/s

(c) Fractional change in frequency due to time dilation: -2.13 × [tex]10^{-10[/tex]

(a) The radius of the GPS satellite's orbit is determined using Kepler's third law, which relates the period and radius of an object in circular motion.

The orbit's radius is calculated to be approximately 2.66 × [tex]10^7[/tex] meters.

(b) The speed of the GPS satellite is calculated using the formula for the velocity of an object in circular motion.

The speed of the satellite is found to be approximately 3,873 m/s.

(c) The fractional change in frequency due to time dilation is calculated using the equation that relates the time dilation factor to the velocity of the satellite.

The fractional change in frequency due to time dilation is approximately -2.13 × [tex]10^{-10[/tex], indicating a decrease in frequency.

For more such questions on Speed, click on:

https://brainly.com/question/13943409

#SPJ11

a.

The Radius of orbit  is [tex]2.66 * 10^7 m[/tex]

b.

The Speed is [tex]3.08 * 10^3 m/s[/tex]

c.

Fractional change in frequency due to time dilation is  [tex]-1.03 x 10^-^5[/tex]

d.

Fractional change in frequency due to gravitational blueshift is

[tex]-6.73 * 10^-^1^1[/tex]

e.

Overall fractional change in frequency is [tex]-1.03 * 10^-^5[/tex]

The given values are:

Mass of Earth (M) = [tex]5.98 * 10^2^4 kg[/tex]

Radius of Earth (r_E) =[tex]6.37 * 10^6 m[/tex]

Period of orbit (T) = 11 h 58 min = 11.97 h = 43,092 s

Frequency of signal (f) = 1,575.42 MHz

Speed of light (c) = [tex]3 * 10^8 m/s[/tex]

Gravitational constant (G) = [tex]6.674 * 10^-^1^1[/tex]N(m/kg)²

(a) Radius of orbit (r):

r = (G * M * T² / 4π²)[tex]^(^1^/^3^)[/tex]

r = [tex]2.66 * 10^7 m[/tex]

(b) Speed (v):

v = (2π * r) / T

= [tex]3.08 * 10^3 m/s[/tex]

(c) .

:

Δf/f = -Δt/ΔT

= - Δt / T

= - v / c

= [tex]-1.03 * 10^-^5[/tex]

(d) Fractional change in frequency due to gravitational blueshift:

Δf/f = ΔU_g / (m * c²)

= [tex]-6.73 * 10^-^1^1[/tex]

(e) Overall fractional change in frequency:

Δf/f = Δf_time_dilation + Δf_gravitational_blueshift

= [tex]-1.03 * 10^-^5[/tex]

Learn more about Radius at:

https://brainly.com/question/27696929

#SPJ4

The battery loses 432 joules of energy in a minute when it causes a current of 0.60 A through a resistor with a resistance of 20 ohms.

(a) The resistance can be calculated using Ohm's law: R = V/I, where V is the voltage of the battery (12 V) and I is the current (0.60 A). So, R = 12 V / 0.60 A = 20 ohms.

(b) The energy lost by the battery in a minute can be calculated using the formula: E = P*t, where P is the power (which can be calculated using P = V*I, where V is the voltage and I is the current) and t is the time (in seconds). So, P = 12 V * 0.60 A = 7.2 W, and t = 60 seconds. Therefore, E = 7.2 W * 60 s = 432 joules.

To know more about battery refer https://brainly.com/question/26466203

#SPJ11

Therefore, the peak wavelength of light coming from a star with a temperature of 7,750 K is approximately 373.8 nanometers.

To calculate the peak wavelength of light emitted by a star with a given temperature, we can use Wien's displacement law, which states that the peak wavelength (λmax) is inversely proportional to the temperature (T) of the object. The formula for Wien's displacement law is:

λmax = b / T

Where λmax is the peak wavelength, b is Wien's displacement constant (approximately equal to 2.898 × 10^-3 m·K), and T is the temperature in Kelvin.

Plugging in the values:

λmax = (2.898 × 10^-3 m·K) / (7,750 K)

Calculating this expression:

λmax ≈ 3.738 × 10^-7 m

Converting meters to nanometers (1 nm = 10^-9 m):

λmax ≈ 373.8 nm

Learn more about  peak wavelength of light here:

https://brainly.com/question/20038918

#SPJ11

Therefore, the slit separation that will produce first-order maxima at angles of ±30∘ from the incident direction is 2720 nm.

To determine the slit separation that will produce first-order maxima at angles of ±30∘ from the incident direction, we need to use the equation:
dsinθ = mλ
where d is the slit separation, θ is the angle of the first-order maxima, m is the order of the maxima (which is 1 in this case), and λ is the wavelength of the laser light.
We are given that λ = 680 nm, and we want to find d. We can rearrange the equation above to solve for d:
d = (mλ) / sinθ
Substituting in the given values, we get:
d = (1 * 680 nm) / sin(30∘)
d = 1360 nm / 0.5
d = 2720 nm
In this problem, we were asked to determine the slit separation that will produce first-order maxima at angles of ±30∘ from the incident direction when a laser light with a wavelength λ = 680 nm illuminates a pair of slits at normal incidence. To solve this problem, we used the equation dsinθ = mλ, where d is the slit separation, θ is the angle of the first-order maxima, m is the order of the maxima, and λ is the wavelength of the laser light. We rearranged the equation to solve for d and substituted in the given values to get the answer. The result was that the slit separation needed to produce the desired maxima is 2720 nm. It is important to note that this formula can be used to find the slit separation for any wavelength and any order of maxima.

To know more about wavelength visit:

https://brainly.com/question/31322456

#SPJ11

The maximum horizontal force P that can be applied to the 42-lb hoop without causing it to rotate is approximately 37.366 N.

To determine the maximum horizontal force P that can be applied to the 42-lb hoop without causing it to rotate, we need to consider the friction between the hoop and surfaces A and B. We are given the radius r = 300 mm and the coefficient of static friction μs = 0.2.

First, let's convert the weight of the hoop to its gravitational force. We can do this using the conversion factor 1 lb = 4.44822 N:

42 lb * 4.44822 N/lb ≈ 186.825 N

Now, we can calculate the normal force N between the hoop and surfaces A and B:

N = 186.825 N / 2 = 93.413 N (since there are two contact points)

Next, we can calculate the maximum static friction force Fs at each contact point:

Fs = μs * N = 0.2 * 93.413 N ≈ 18.683 N

Finally, to find the maximum horizontal force P that can be applied without causing the hoop to rotate, we need to sum up the static friction forces at both contact points:

P = 2 * Fs = 2 * 18.683 N ≈ 37.366 N

Learn more about horizontal force here:-

https://brainly.com/question/31060281

#SPJ11

If you could see stars during the day and the sun is near the stars of the constellation Gemini at noon on a given day, it means that the Earth is currently in a position where Gemini is visible during the daytime. However, as the Earth revolves around the sun, its position in the sky changes over time.

Two months into the future, the Earth would have moved along its orbit, causing the sun to appear in a different position relative to the stars. Specifically, the sun's position would have shifted towards the east by approximately 30 degrees due to the Earth's revolution around the sun.

Assuming that the Earth's orbit is roughly circular, the sun's new position at sunset two months into the future would be roughly 30 degrees east of its current position. This means that if the sun was originally near the stars of Gemini at noon, it would likely be closer to the stars of the constellation Taurus or Aries at sunset two months later.

Overall, the sun's position in the sky changes over time due to the Earth's revolution around the sun, causing it to appear in different positions relative to the stars over time.

To know more about Earth's revolution  click this link-

https://brainly.com/question/17773408

#SPJ11

A man becomes obsessed with the memory of his deceased wife and remarries, only to have strange and supernatural occurrences happen.

"Ligeia" is a short story written by Edgar Allan Poe, first published in 1838. The story follows an unnamed narrator and his love for the beautiful and intelligent Ligeia, whom he marries. After Ligeia falls ill and dies, the narrator marries again, but cannot forget his first wife. Strange occurrences and mysterious events lead the narrator to question whether Ligeia has truly left him, or if she has found a way to return from beyond the grave. The story explores themes of love, death, grief, and the supernatural.

The paragraph is "In Edgar Allan Poe's story "Ligeia," the narrator is haunted by the memory of his deceased wife, Ligeia, whom he believes to possess supernatural qualities. He later marries Lady Rowena, but her death leads the narrator to believe that Ligeia has returned to him through her body. The story explores themes of obsession, grief, and the blurred lines between reality and fantasy."

Therefore, "Ligeia" is a story by Edgar Allan Poe about a man who becomes obsessed with his beautiful and intelligent wife, Ligeia, who dies and mysteriously returns to life in the form of another woman after his second marriage to Lady Rowena.

To learn more about  supernatural elements click:

https://brainly.com/question/30426362

#SPJ1

The speed at which a red traffic light (λ = 675 nm) would appear yellow (λ = 575 nm), we can use the formula for the Doppler effect. The Doppler effect describes how the perceived wavelength of light changes due to the relative motion between the source (the traffic light) and the observer (the driver).

A. To perceive a red traffic light (λ = 675 nm) as yellow (λ = 575 nm), the observer must be moving at a certain speed. This speed can be determined using the concept of the Doppler effect, where the observed wavelength of light is shifted due to the relative motion between the source (traffic light) and the observer (driver).

B. According to the equation for the Doppler effect, the observed wavelength (λ') is related to the source wavelength (λ) and the relative velocity (v) by the equation:

[tex]\lambda' = \lambda \left(1 + \frac{v}{c}\right)[/tex]

where c is the speed of light and v is the relative velocity between the source and the observer. In this case, we want to find the velocity v at which the red light appears yellow. Thus, we can set up the equation as follows:

λ' = 575 nm

λ = 675 nm

v = ?

c = speed of light = 3.00 x 10⁸ m/s (approximate value)

Using the equation, we can rearrange it to solve for v:

[tex]v = \frac{{(\lambda' - \lambda) \cdot c}}{{\lambda}}[/tex]

Substituting the given values:

[tex]v = \frac{{(575 , \text{nm} - 675 , \text{nm}) \cdot (3.00 \times 10^8 , \text{m/s})}}{{675 , \text{nm}}}[/tex]

[tex]v = \frac{{-100 , \text{nm} \cdot (3.00 \times 10^8 , \text{m/s})}}{{675 , \text{nm}}}[/tex]

v ≈ -1.33 x 10⁸ m/s

The negative sign indicates that the observer is moving away from the traffic light.

Now, to determine the fine for speeding, we need to calculate the excess speed over the posted limit. The given speed of 0.159 c can be converted to km/h:

[tex]v = 0.159 \cdot c \cdot (3.00 \times 10^8 , \text{m/s}) \cdot (3600 , \text{s/h}) / (1000 , \text{m/km}) \approx 1.44 \times 10^7 , \text{km/h}[/tex]

The excess speed over the posted limit is:

Excess speed = (1.44 x 10⁷ km/h) - 90 km/h

The fine is calculated by multiplying the excess speed by the fine rate per km/h:

Fine = (Excess speed) * ($1.60/km/h)

To know more about the speed refer here :

https://brainly.com/question/17661499#

#SPJ11

The centripetal acceleration of the Hubble Space Telescope (HTS) is approximately 1,183 m/s^2.

To calculate the centripetal acceleration of the Hubble Space Telescope (HTS), we can use the formula:

a = v^2 / r

Where "a" is the centripetal acceleration, "v" is the velocity of the satellite, and "r" is the radius of its orbit.

We know that the HTS makes 15 complete orbits of the Earth every 24 hours. This means that its period (T) is:

T = 24 hours / 15 = 1.6 hours

We can use this to calculate the velocity (v) of the HTS:

v = 2πr / T

Where "π" is pi (3.14).

Plugging in the values we know, we get:

v = 2π(6920 km) / 1.6 hours
v ≈ 28,641 km/h

Now we can plug this velocity and the radius of the HTS's orbit into the centripetal acceleration formula:

a = (28,641 km/h)^2 / 6920 km
a ≈ 1,183 m/s^2

To know more about the Hubble Space Telescope, click here;

https://brainly.com/question/30246219

#SPJ11

The speed of sound in the organ pipe is 320 m/s.

To find the speed of sound, we will first determine the frequencies of the second and third modes for a closed pipe organ.

For a closed pipe, the formula for the fundamental frequency (first mode) is:

f1 = v / 4L

where f1 is the fundamental frequency, v is the speed of sound, and L is the length of the pipe.

The second mode (n=3, because only odd harmonics are allowed in a closed pipe) and third mode (n=5) frequencies are:

f2 = 3 * f1
f3 = 5 * f1

We know that f3 - f2 = 200 Hz. Substituting the expressions above, we get:

5 * f1 - 3 * f1 = 200 Hz
2 * f1 = 200 Hz

Now, we can find the fundamental frequency:

f1 = 200 Hz / 2 = 100 Hz

Now we will use the formula for the fundamental frequency of the closed pipe to find the speed of sound:

f1 = v / 4L
100 Hz = v / (4 * 0.8 m)

Solving for v:

v = 100 Hz * (4 * 0.8 m)
v = 320 m/s

Learn more about speed  here:-

https://brainly.com/question/17661499

#SPJ11

The age of the charcoal sample can be determined using the decay equation for C-14 and measuring the remaining C-14 atoms compared to the initial amount. However, caution should be exercised regarding assumptions made and potential contamination.

To determine the age of the charcoal sample, we can use the concept of radioactive decay. Carbon-14 (C-14) is a radioactive isotope of carbon that undergoes decay at a known rate. The half-life of C-14 is approximately 5730 years. By measuring the amount of C-14 remaining in the charcoal sample and comparing it to the initial amount, we can calculate its age.

Given that the charcoal sample contains 65.0 grams of carbon and decays at a rate of 0.887 Bq (becquerels), we need to convert the decay rate to a number of carbon atoms. The decay rate of C-14 is measured in disintegrations per second (Bq), which corresponds to the number of C-14 atoms decaying per second.

Knowing that the atomic mass of carbon is approximately 12 g/mol, we can convert the mass of the charcoal to moles of carbon. Then, using Avogadro's number, we can convert moles of carbon to the number of carbon atoms.

Next, we calculate the initial number of C-14 atoms present in the charcoal sample by assuming that the ratio of C-14 to stable carbon (C-12 and C-13) in the atmosphere has remained relatively constant over time. This ratio is about 1 in 1 trillion.

We can then use the decay equation for exponential decay, [tex]N(t) = N_0 \left(\frac{1}{2}\right)^{\frac{t}{t_{1/2}}}[/tex], where N(t) is the remaining number of C-14 atoms, N₀ is the initial number of C-14 atoms, t is the time in years, and [tex]t_{1/2}[/tex] is the half-life of C-14.

Solving the equation for t, we can find the age of the charcoal sample. Plugging in the values, we have [tex]N(t) = N_0 \cdot \left(\frac{1}{2}\right)^{\frac{t}{5730}}[/tex].

Using logarithms, we can rearrange the equation to isolate t: [tex]t = \frac{{5730 \cdot \log\left(\frac{{N_0}}{{N(t)}}\right)}}{{\log(2)}}[/tex].

Substituting the values, we can calculate the age of the charcoal sample. However, we need to be cautious about the assumptions made, such as the constant atmospheric C-14 ratio. Calibration with other dating methods and consideration of potential contamination should also be taken into account to obtain accurate results.

To learn more about charcoal

https://brainly.com/question/3466681

#SPJ4

A temporary tubing repair should be used when there is a small leak or damage to the tubing that can be easily fixed with a quick and simple solution.

A temporary tubing repair should be used when there is minor damage to the tubing, and a quick fix is needed to maintain functionality until a more permanent solution can be implemented.

                                             This type of repair is often used in situations where the tubing is critical to the operation of a system, and a temporary fix can help prevent further damage or downtime. Remember that a temporary repair is not meant to replace a proper, long-term solution, and the damaged tubing should eventually be replaced or repaired by a professional.

                                         For example, if a small crack or hole is discovered in a garden hose, a temporary repair can be made using duct tape or a hose repair kit until a permanent solution can be implemented. However, if the damage is severe or poses a safety risk, a temporary repair should not be used and the tubing should be replaced immediately.

Learn more about tubing

brainly.com/question/28986788

#SPJ11

The kinetic energy of the electron required for γ = 1.03 is 0.257 MeV. The kinetic energy of the proton required for γ = 1.03 is 277.5 MeV.

Relativistic kinetic energy is the kinetic energy of an object that is moving at a significant fraction of the speed of light, and takes into account relativistic effects.

The relativistic kinetic energy of an electron is given by,

[tex]K = \gamma mc^2 - mc^2[/tex]

where m is the rest mass of the electron and c is the speed of light.

Setting γ = 1.03, we have,

[tex]K = (1.03)(9.11\times 10^{-31})(2.998\times 10^8)^2 - (9.11×10^{-31})(2.998\times 10^8)^2\\\\= 0.587 MeV[/tex]

The relativistic kinetic energy of a proton is given by,

[tex]K = (\gamma - 1)mc^2[/tex]

where m is the rest mass of the proton and c is the speed of light. Setting γ = 1.03, we have,

[tex]K = (1.03 - 1)(1.67\times 10^{-27})(2.998\times 10^8)^2 \\\\= 0.123 MeV[/tex]

To know more about kinetic energy, here

https://brainly.com/question/999862

#SPJ4

To calculate the volume of a solution, we can use the formula:

Volume = Mass / Density

Substituting the given values, we get:

Volume = 3.0 g / 1.5 g/ml

Volume = 2 ml

Therefore, the volume of the solution is 2 ml.

learn more about density

https://brainly.com/question/29775886?referrer=searchResults

#SPJ11

When astronomers say that Ganymede is a differentiated body, they mean that it has a heavier core, surrounded by a lighter, icy mantle and crust. Option D

The biggest moon in the solar system, Ganymede is a natural satellite of Jupiter. It was called after the legendary character Ganymede, a cupbearer to the gods, and it was found in 1610 by Galileo Galilei. In many ways, Ganymede is an unusual moon.

It is the only moon in the solar system with a significant atmosphere, and it is the only moon known to have its own magnetic field. In addition, Ganymede is a distinct body with a core, mantle, and crust.

Learn more about astronomy:https://brainly.com/question/5165144

#SPJ4

If one of the light bulbs and its attached wire segment were removed in the series circuit shown below, the remaining light bulbs in the circuit would go out and stop functioning.

In a series circuit, the components are connected in a single path, one after the other. The current flows through each component in the circuit sequentially. When one component is removed, the circuit becomes incomplete, and the flow of current is interrupted.

In the given circuit, the removal of a light bulb and its attached wire segment breaks the continuity of the circuit. Without a complete path for the current to flow, the remaining light bulbs in the circuit would not receive any current and, therefore, would not light up.

This is because the series circuit relies on the flow of current through each component to power them. Removing one component disrupts the flow of current throughout the entire circuit, resulting in the loss of functionality for all the remaining components.

To know more about series circuit, refer here:

https://brainly.com/question/14997346#

#SPJ4

To calculate the gravitational potential energy of an object, we need to select the quantities that are involved in the calculation. These quantities include the acceleration due to gravity in the vicinity of the object, the mass of the object, and the vertical height of the object from some reference point. Additionally, we need to know the distance of the object from the reference point and the velocity of the object. Lastly, the volume of the object may also be needed in some cases.

Using the symbols defined in the problem, we can write the equation for the gravitational potential energy of the object as follows: gravitational potential energy (e) = mass (m) x acceleration due to gravity (g) x height (h) + kinetic energy (K). Here, the kinetic energy term (K) accounts for the velocity of the object, which may need to be included in the calculation depending on the situation.

In conclusion, the quantities needed to calculate the gravitational potential energy of an object are the mass, acceleration due to gravity, vertical height, distance from the reference point, and velocity. Using these quantities and the defined symbols, we can complete the equation for the gravitational potential energy of the object.

To know more about gravitational potential energy, click here;

https://brainly.com/question/23134321

#SPJ11

a) By using the impulse-momentum theorem the average force exerted on the goalie by the puck is approximately -2415 N.

b) The average force exerted on the goalie is approximately -4830 N in the direction of the goalie's stick.

(a) The average force exerted on the goalie by the puck can be found using the impulse-momentum theorem.

Which states that the impulse (J) of a force acting on an object is equal to the change in momentum (Δp) of the object. Mathematically, this can be written as:

J = Δp = m(vf - vi)

where m is the mass of the object, vf is the final velocity of the object, and vi is the initial velocity of the object.

In this case, the initial velocity of the puck is +69 m/s and the final velocity of the puck is 0 m/s (since the goalie catches the puck), so the change in velocity is -69 m/s.

Therefore, the impulse on the puck is:

J = m(vf - vi) = (0.14 kg)(0 m/s - 69 m/s) = -9.66 Ns

Since the impulse is equal to the average force multiplied by the time over which the force acts, we can solve for the average force:

F = J / Δt = -9.66 Ns / (4.0 × 10[tex]^(-3)[/tex] s) ≈ -2415 N

The negative sign indicates that the force is in the opposite direction of the initial velocity of the puck, which means it is in the direction of the goalie's glove.

(b) When the goalie slaps the puck with his stick, the impulse on the puck is again given by J = Δp = m(vf - vi), but this time vf is -69 m/s (since the puck is traveling in the opposite direction) and vi is 69 m/s. Therefore, the impulse on the puck is:

J = m(vf - vi) = (0.14 kg)(-69 m/s - 69 m/s) = -19.32 Ns

Since the impulse is equal to the average force multiplied by the time over which the force acts, we can solve for the average force:

F = J / Δt = -19.32 Ns / (4.0 × 10[tex]^(-3)[/tex] s) ≈ -4830 N

Again, the negative sign indicates that the force is in the opposite direction of the initial velocity of the puck, which means it is in the direction of the goalie's stick.

Learn more about impulse-momentum theorem

brainly.com/question/14121529

#SPJ11

The new image location on the image plane z=1 is (3/4, 3/2, 1). The general formula for the new image location on the image plane z'=1 is (x * (1/(2-z)), y * (1/(2-z)), 1).

a. To find the image location for the new image plane (z=1), we can use similar triangles. The original point is (3/2, 3, 1/2), and the image plane equation is x+z=2. Let the new point be (x', y', 1). We can form the following ratios:

x'/3/2 = 1/(1/2)
y'/3 = 1/(1/2)

Solving for x' and y', we get:

x' = 3/2 * (1/2) = 3/4
y' = 3 * (1/2) = 3/2

So, the new image location on the image plane z=1 is (3/4, 3/2, 1).

b. For a general formula, let the original point be (x, y, z) with x+z=2, and the new image plane be z'=1. Let the new point be (x', y', 1). Using similar triangles, we can form the following ratios:

x'/x = 1/(2-z)
y'/y = 1/(2-z)

Solving for x' and y', we get:

x' = x * (1/(2-z))
y' = y * (1/(2-z))

So, the general formula for the new image location on the image plane z'=1 is (x * (1/(2-z)), y * (1/(2-z)), 1).

More on images: https://brainly.com/question/6314707

#SPJ11

Energy flow in a food web can be estimated by analyzing the dietary composition and using data from Table 1.

Estimating energy flow in a food web involves understanding the transfer of energy from one trophic level to another. By examining the dietary composition of organisms in the food web, we can gain insights into the flow of energy.

Table 1 provides data on the dietary composition, which outlines the organisms' feeding relationships and their respective energy sources. By analyzing this data, we can determine the energy transfer pathways, identify the primary producers, consumers, and decomposers, and estimate the amount of energy transferred between trophic levels.

This estimation helps us understand the energy dynamics and ecological relationships within the food web.

Learn more about Energy flow in a food web

brainly.com/question/31251641

#SPJ11

The angular resolution of a telescope receiving dish for the 21.1 cm line would be approximately 1.21 degrees.

The 21.1 cm line is an important emission line in radio astronomy because it corresponds to hyperfine transitions in hydrogen. This line is used by astronomers to study the interstellar medium, including the distribution of neutral hydrogen gas in our galaxy and beyond.
To determine the angular resolution of a telescope receiving dish for the 21.1 cm line, we need to use the formula:
θ = λ / D
where θ is the angular resolution in radians, λ is the wavelength of the radiation, and D is the diameter of the telescope dish.
The wavelength of the 21.1 cm line is 0.211 meters. If we assume a telescope dish diameter of 10 meters, then the angular resolution would be:
θ = 0.211 / 10 = 0.0211 radians
To convert this to degrees, we can use the formula:
θ (degrees) = θ (radians) x (180 / π)
where π is the mathematical constant pi.
Plugging in the values, we get:
θ (degrees) = 0.0211 x (180 / π) = 1.21 degrees
Therefore, the angular resolution of a telescope receiving dish for the 21.1 cm line would be approximately 1.21 degrees.

To know more about radio astronomy visit: https://brainly.com/question/21110187

#SPJ11

The soma of a neuron is responsible for receiving and integrating information from synapses, which allows for proper communication and functioning of the nervous system.

The soma, also known as the cell body of a neuron, is the part of the neuron that receives information from synapses. Synapses are the small gaps between neurons where communication occurs, and neurotransmitters are released to transmit information from one neuron to another. When a neurotransmitter binds to a receptor on the dendrites or cell body of a neuron, it triggers a series of chemical reactions that generate an electrical signal. This electrical signal then travels down the axon, which is the long, slender extension of the neuron, to transmit information to other neurons or target cells. In summary, the soma of a neuron is responsible for receiving and integrating information from synapses, which allows for proper communication and functioning of the nervous system.

To know more about Neurons visit:

https://brainly.com/question/31215300

#SPJ11

More than one of the above. If an apple experiences a constant net force, it will have a constant acceleration. Its speed and velocity may change depending on the direction of the force.

If an apple experiences a constant net force, its acceleration will be constant. This means that the apple's speed and velocity can change over time. If the force acts in the same direction as the apple's initial motion, the apple's speed will increase. Conversely, if the force acts in the opposite direction, the apple's speed will decrease. The apple's position will also change over time due to its changing velocity. However, it's important to note that if the net force acting on the apple is zero, its speed, position, and velocity will remain constant due to the absence of acceleration.

Learn more about constant net force here:

https://brainly.com/question/29597873

#SPJ11

The change in momentum of the ball is 4.56 kg*m/s.

What is Momentum?

Momentum is a property of an object that is moving and is equal to the product of its mass and velocity. Mathematically, momentum (p) is given by the equation p = m * v, where m is the mass of the object and v is its velocity. Momentum is a vector quantity, meaning it has both magnitude and direction, and its unit is kilogram-meter per second (kg⋅m/s) in the SI system.

The tennis ball hits the racket at a speed of 52m/s. The average force on the ball during the

time that it is in contact with the racket is 350 N. The speed of the ball after it leaves the racket is

26 m/s in the opposite direction to the initial speed of the ball. The mass of the ball is 58g. N

Y

(a) (i) Calculate the change in momentum of the ball while it is in contact with the racket

The change in momentum of the ball can be calculated using the formula:

Δp = p₂ - p₁

where Δp is the change in momentum, p₂ is the final momentum of the ball, and p₁ is the initial momentum of the ball.

We can calculate the initial momentum of the ball using:

p₁ = m₁v₁

where m₁ is the mass of the ball and v₁ is the initial velocity of the ball.

Given that the mass of the ball is 58g, which is 0.058 kg, and the initial velocity of the ball is 52 m/s, we get:

p₁ = m₁v₁

p₁ = 0.058 kg × 52 m/s

p₁ = 3.016 kg⋅m/s

We can calculate the final momentum of the ball using:

p₂ = m₁v₂

where v₂ is the final velocity of the ball.

Given that the final velocity of the ball is 26 m/s in the opposite direction to the initial velocity, we get:

v₂ = -26 m/s

p₂ = m₁v₂

p₂ = 0.058 kg × (-26 m/s)

p₂ = -1.508 kg⋅m/s

Therefore, the change in momentum of the ball is:

Δp = p₂ - p₁

Δp = (-1.508 kg⋅m/s) - (3.016 kg⋅m/s)

Δp = -4.524 kg⋅m/s

The negative sign indicates that the momentum of the ball has decreased.

To know more about Momentum visit:

https://brainly.com/question/1042017

#SPJ4

The question asks for the kinetic energy of the products of the decay to be determined, which is given as -4.57 MeV.

It presents a nuclear decay problem involving the isotopes 56Co and 26Fe. The atomic masses of these isotopes are provided, and it is stated that 56Co decays into 26Fe.

The type of decay that will occur is then asked, and the options are given as 2He (alpha) decay, positron decay, or beta decay. It is then confirmed that beta decay is the correct answer.

Finally, the question asks for the kinetic energy of the products of the decay to be determined, which is given as -4.57 MeV.

This problem involves knowledge of nuclear decay and the calculation of kinetic energy from mass differences.

Learn more about Nuclear decay.

brainly.com/question/12224278

#SPJ11