8. If the m<5 is 63°, find the
measure of <3.

The acceleration of the snowboarder is 0.466 m/s².

Acceleration is the rate of change of velocity.

To calculate the acceleration of the snowboarder, we use the formula below.

Formula:

Where:

From the question,

Given:

Susbtitute these values into equation 1

Hence, the acceleration is 0.466 m/s².

Learn more about acceleration here: https://brainly.com/question/460763

#SPJ1

Accelerating linearly is simple.

When the velocity vector length of an object moving in a straight line changes in response to changes in the object's speed (speed being the magnitude of the velocity vector), we have acceleration. Increasing speed is frequently referred to as "positive acceleration" and decreasing speed as "negative acceleration."

A particle's acceleration is the rate at which its velocity changes over time. The term "constant acceleration" refers to the pace at which a particle's velocity changes.

We shall measure acceleration in metres per second per second because our basic units are metres and seconds.

Therefore, Accelerating linearly is simple.

To learn more about Acceleration, refer to the link:

https://brainly.com/question/12550364

#SPJ1

Answer:

24.4

Explanation:

you would add all the numbers , 25.5+24.4+24.2= 73.1/3=24.36 and you round up you get 24.4

The force needed to accelerate the mass of 100 kg is 500 N.

Force is the product of mass and acceleration. The S.I unit of force is Newton (N).

To calculate the amount of force needed to accelerate the mass of 100 kg, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the force is 500 N.

Learn more about force here: https://brainly.com/question/12785175

#SPJ1

Answer:

Yup

Explanation:

The magnitude of the average force exerted on the glove by the other boxer is 466.3 N.

The force that acts on a body is defined as an agent that causes a change in the position or the state of an object.

Force can be defined as a push or pull agent.

The impulse that acts on a body is the product of the force that acts on that body and the time in which it acts.

Hence, the  relationship between force and impulse is given below:

Force = Impulse/time

The force exerted on the glove by the other boxer is calculated using the formula above as follows:

Force = 194 / 0.416

Force = 466.3 N

Learn more about force and impulse at: https://brainly.com/question/20586658

#SPJ1

Important Formulas:
[tex]w=Fd[/tex]

work(measured in joules) = force(measured in newtons) * distance(measured in meters)

__________________________________________________________

Given:

[tex]m=42kg[/tex]

[tex]F=180N[/tex]

[tex]w=2500J[/tex]

[tex]d=?[/tex]

__________________________________________________________

Rearranging work formula to make distance the subject:

[tex]w=Fd[/tex]

[tex]\dfrac{w}{F} =\dfrac{Fd}{F}[/tex]

[tex]d=\dfrac{w}{F}[/tex]

__________________________________________________________

Finding distance:

[tex]d=\dfrac{w}{F}[/tex]

[tex]d=\dfrac{2500}{180}[/tex]

__________________________________________________________

[tex]\fbox{d = 13.89 meters}[/tex]

Answer:

Infinity. Yes, specific value of water during phase change is infinity. This is because, as long as water is present and it is changing phase (at boiling point or at any other constant temperature), the temperature of the water does not change no matter what amount of heat you are supplying to the water. Thus, its specific heat value is infinity.

The boy weighs at about 80 kg. When, as illustrated, a N 784 guy balances the youngster on a teeter-totter.

A way to determine how much material, in mass, makes up a physical body.

In classical mechanics, an object's mass is essential to Newton's equations of motion because it affects the force required to accelerate it and, subsequently, how much inertia it has.

Language expert Peter Trudgill claims that the name "Tittermatorter" from the Norfolk language is its origin. Trudgill can trace all of his great-great-grandparents to a tiny region of eastern Norfolk.

As per the question:

Weight is come under gravity and become force

80g = mg

m = 80

Force = 80(9.8) = 784N

Thus, the answer is 784N.

For more details regarding mass, visit:

https://brainly.com/question/19694949

#SPJ1

If force is doubled, acceleration will also be doubled.

In this given question, force is doubled. We know that force is directly proportional to acceleration. As we increase the force on an object the acceleration increases proportionally. Therefore, if you double the force you double the acceleration.

To know more about force visit:

https://brainly.com/question/15486556

#SPJ1

A horizontal force of 10.0 N is acting on a 10 kg box that is sliding to the right along the floor with velocity v.

Most people make the common assumptions of rigid body action and ignoring air resistance and friction. In statics, all forces and moments must balance to zero; if they don't, the body is accelerating and the laws of statics do not apply, according to the physical interpretation.

The specific situation and the presumptions used will determine how many forces and moments are displayed. Most people make the common assumptions of rigid body action and ignoring air resistance and friction.

In statics, all forces and moments must balance to zero; if they don't, the body is accelerating and the laws of statics do not apply, according to the physical interpretation. The resultant forces and moments in dynamics can have non-zero values.

To be learn more about Free body diagram visit:

https://brainly.com/question/30054881

#SPJ1

Answer:

decrease

Explanation:

this is for part a

The full load primary current of a 230/115V, 2kVA transformer can be calculated using the formula:

I_primary = (2kVA * 1000 VA/kVA) / (230V)

I_primary = 8.7V

The full load secondary current of the transformer can be calculated using the formula:

I_secondary = (2kVA * 1000 VA/kVA) / (115V)

I_secondary = 17.4V

Therefore, the full-load primary current of the transformer is approximately 8.7V, and the full-load secondary current is approximately 17.4V. It is important to note that these values are based on the assumption that the transformer is operating at its full load capacity. If the transformer is operating at a lower load, the primary and secondary currents will be correspondingly lower.

(a) The magnitude of the car's normal force is 7,792.2 N.

(b) The mass of the car is 795.1 kg.

The weight of the car is calculated by applying Newton's second law of motion as shown below.

Mathematically, the formula for Newton's second law of motion is given as;

Ff = μW

where;

The weight of the car is calculated as follows;

W = Ff / μ

W = ( 6,000 N ) / ( 0.77 )

W = 7,792.2 N

Based on Newton's third law of motion, the weight of the car acting downwards is equal to normal force on the car, acting upward.

The mass of the car is calculated as follows;

W = mg

where;

m = W / g

m = ( 7792.2 ) / (9.8)

m = 795.1 kg

Learn more about normal force here: https://brainly.com/question/14486416

#SPJ1

Answer:

drops

Explanation:

Ohm's Law states that V=I*R, where V is voltage, I is current and R is resistance. In a series circuit, the voltage drop across each resistor will be directly proportional to the size of the resistor. In a parallel circuit, the voltage drop across each resistor will be the same as the power source

Resistors limits the current/amps but keep the voltage the same.

You don't want to attach them together with a wire since there would be too much current loose through, such that the battery heats up till it blows or something.

Current is directly corresponding to voltage; a doubling of the voltage will double the current. But the current is also inversely comparable to the resistance; a doubling of the resistance will halve the current.

So we can conclude that Resistance residue is the same, but power becomes four times i.e. multiplication. If the current is I and the voltage is V,

Learn more about resistors here: https://brainly.com/question/24858512

#SPJ1

To solve this we must be knowing each and every concept related to interval. Therefore, values of the displacement of the string at x = 5.0 m at 1 s intervals from t = 0 s to t = 6 s can be listed as below.

An interval is any set of numbers that fall between two distinct integers. This range includes all real values that fall between those two. All real numbers that lie in any 2 of a set's numbers are collectively referred to as an interval within mathematics.

For instance, the set of integers x fulfilling 0 x 1 is the interval consisting of 0, 1, and all numbers in between. a snapshot graph of wave on a string moving toward one another at 1 m/s at time t = 0 s.

At time t = 0,Y₀= 0 cm

At At time t =1, Y₁= 0 cm

At time t = 2, Y₂= 0 cm

At time t =3, Y₃= 0 cm

At time t =4, Y₄= 0 cm

At time t = 5 ,Y₅=0 cm

At time t = 6, Y₆= 0 cm

Therefore, values of the displacement of the string at x = 5.0 m at 1 s intervals from t = 0 s to t = 6 s can be listed as above.

To learn more about interval, here:

brainly.com/question/13708942

#SPJ1

Answer:

Object 1

Explanation:

Newton's 2nd Law:  F = ma, therefore m = F/a

This shows that mass is inversely proportional to acceleration.  Because the resultant force (F) is held constant in this problem, the lower the acceleration, the greater the mass.  Therefore, the object that accelerates at 2 m/s² has the greater mass.  In other words, if the net force on both objects is the same, the object with the slower acceleration has the greater mass.  

After solving the equation the wave is traveling at a velocity of 3 m/s.

Velocity is a vector quantity that describes the rate at which an object changes its position. It is a measure of both the speed and the direction of an object. Velocity is typically expressed in terms of meters per second (m/s). When an object is in uniform motion, its velocity is constant, meaning that it is not changing in magnitude or direction. If an object is accelerating, its velocity is changing over time, either in magnitude, direction, or both.

The velocity of the wave can be calculated using the following equation:
Velocity = Wavelength x Frequency
In this case, the wavelength is 0.5 m and the frequency is 6 Hz (6 cycles per second). So, the velocity of the wave is:
Velocity = 0.5 m x 6 Hz = 3 m/s
This means that the wave is traveling at a velocity of 3 m/s.

To learn more about velocity
https://brainly.com/question/29223620
#SPJ1

Based on the data provided about the collision;

The magnitude of the impulse due to the collision of the vehicle with the wall is calculated using the formula of the impulse on an object given below as follows:

Impulse = change in momentum

Change in momentum = m(v - u)

where;

m is mass

v is the final velocity

u is the initial velocity

Impulse = 1759 (12 - 22)

Impulse = 21105.8 kg.m/s

The average force on the automobile will be:

Force = impulse/time

Force = 21105.8 / 0.11

Force = 191870.91 N

Learn more about force and impulse at: https://brainly.com/question/20586658

#SPJ1

Beta decay is seen in the nuclear reaction: ⁹⁰₃₉Y → ⁹⁰₄₀Zr + ⁰₋₁e. Hence, option (A) is correct.

A proton can change into a neutron or vice versa inside the radioactive sample's nucleus through a process known as beta decay.

The radioactive sample's nucleus can approach the ideal neutron/proton ratio as closely as feasible through processes like beta decay and alpha decay. The nucleus releases a beta particle during this process, which can either be an electron or a positron.

As electron releases here, it is a Beta (β) decay.

Learn more about Beta decay here:

https://brainly.com/question/25455333

#SPJ1

The number of excess electrons is 4.0 x 107 Coulombs divided by 1.60 x 10-19 Coulombs, which is 2.5 x 1026 electrons.

Electrons are particles of matter that carry a negative electrical charge. Electrons are the smallest particles in the atom and are responsible for most of the atom's mass. Electrons orbit around the nucleus of the atom and are held together by the electromagnetic force. Electrons have a property called spin, which can have a value of either +1/2 or -1/2. Electrons are found in all elements and are important in chemical reactions as they are able to move around and form bonds with other atoms. Electrons are also important in electricity and magnetism.

The number of excess electrons on the balloon is equal to the charge of the balloon divided by the charge of an electron. Since the charge of an electron is 1.60 x 10-19 Coulombs, the number of excess electrons is 4.0 x 107 Coulombs divided by 1.60 x 10-19 Coulombs, which is 2.5 x 1026 electrons.

To learn more about electrons
https://brainly.com/question/29406094
#SPJ1

The reason that Silent Spring was so influential at the time is option D: It was the first time that the public was being made aware of the long-term impacts of pollution.

Silent Spring, a book written by Rachel Carson and published in 1962, was influential at the time because it was the first book to bring awareness to the negative impacts of pesticides on the environment and human health.

Therefore, The book provided evidence and detailed accounts of the harmful effects of pesticides on wildlife and ecosystems, and it argued that the widespread use of pesticides was unsustainable and could have long-term consequences for the environment and human health.

Learn more about Silent Spring  from

https://brainly.com/question/1107586

#SPJ1

When a cold piece of metal is placed in hot water, heat will flow from the water to the metal.

The correct option is D.

The molecules in a cup of hot water differ from the molecules in a cup of cold water in that, in the hot water, the molecules are moving faster than in the cold water.

The correct option is B.

Heat energy is a type of energy that is transmitted between systems or objects with various temperatures. Heat energy is also known as thermal energy.

The direction of the flow of heat energy is from the high-temperature system to the low-temperature system.

For example, heat energy will flow from hot water to a cold piece of metal; placed inside it.

The molecules of a hotter body have more kinetic energy than the molecules of a colder body.

Learn  more about heat energy at: https://brainly.com/question/19666326

#SPJ1

The value of x is 0.04m and restoring force is 9 N

(a) From the figure, the spring force balances force due to gravity.

    So, [tex]\frac{1}{2} kX^{2} = mg[/tex]

    Where, k = spring constant = 50N/m

                 X = compressed distance = L+x = 0.1+x

                 m = mass = 50 g = 0.05Kg

                 g = acceleration due to gravity = 10

Putting these values in above equation, we get: x= 0.04m

(b) Using Hooke's law, F = kx

     Where, k = spring constant =50N/m

                  x = distance = 180mm = 0.18 m

    Putting these values in above equation, we get restoring force F = 9N

To know more about spring visit:

https://brainly.com/question/13775913

#SPJ1