60 points! please help me! i will appreciate it

Mass of sodium :- 23 grams

Mass of Chlorine :- 35.5 grams

Mass of NaCl :- 58.5 grams

mass given :- 25 grams

moles :- 0.432 ( given mass/ ionic mass)

[tex]molarity = \frac{moles}{vol} \\ molarity = \frac{0.432}{2} \\ molarity = 0.216 \: mole{l}^{ - 1} or \: molar[/tex]

The Figure is not found here but the tiny hairlike organelles are also referred to as cilia.

Cilia are a special type of hairlike organelles capable of covering the surface of cells in many different organisms.

Cilia are found in different eukaryotic organisms ranging from unicellular protists to mammals (epithelial tissues).

The function of cilia is to produce motion (movement) of the cell in which these structures are found.

Learn more about cilia here:

https://brainly.com/question/226194

Answer:

C. Burning oil

Explanation:

Water cannot be used as a fire extinguisher to extinguish the flames of burning oils such as gasoline, petrol, or diesel. Because oil is lighter than water, it floats on top of it and cremates. Furthermore, as the water spreads and carries the oil with it, the fire spreads over a larger area.

I am joyous to assist you at any time.

Answer:

Burning oil

Explanation:

This is a microscope.

Hope this clears that up for you.

A 1.775g sample mixture of KHCO₃ is decomposed by heating. if the mass loss is 0.275g, the mass percentage of KHCO₃ is 70.4%.

A decomposition reaction can be defined as a chemical reaction in which one reactant breaks down into two or more products.

2 KHCO₃(s) → K₂CO₃(s) + CO₂(g) + H₂O(l)

The mass loss of 0.275 g is due to the gaseous CO₂ that escapes the sample.

In the balanced equation, the mass ratio of KHCO₃ to CO₂ is 200.24:44.01.

0.275 g CO₂ × 200.24 g KHCO₃/44.01 g CO₂ = 1.25 g KHCO₃

There are 1.25 g of KHCO₃ in the 1.775 g sample.

%KHCO₃ = 1.25 g/1.775 g × 100% = 70.4%

A 1.775g sample mixture of KHCO₃ is decomposed by heating. if the mass loss is 0.275g, the mass percentage of KHCO₃ is 70.4%.

Learn more about decomposition reactions here: https://brainly.com/question/14219426

Answer:

It goes through a process called absorption. This is when an atom absorbs the energy from its surroundings. The electrons move from the ground state to the excited state because of this process. Once the atoms absorb energy, that affects the inner development when shifting to a new state of being.

Explanation:

The process that is known as absorption is when an atom absorbs energy from its surrounding racing it's energy level causing it to go into an excited state or highly-reactive state. When an atom goes through this process, electrons absorb the energy and raise to higher energy levels, therefore raising the stage of itself. This is how it gets into a excited state.

Answer:

Silk! All the others were inventions of the Han period.

Explanation:

Silk fabric was invented in Ancient China. Legend has it that the process for making silk cloth was first invented by the wife of the Yellow Emperor, Leizu, around the year 2696 BC.

- profparis

Answer:

- Deep red fire is about 600-800° Celsius

- Answer: {1102.91}

Given: K= °C + 273.15

K = 1,376.06

Since you’re trying to find C (Celsius) you want to get C by itself in the problem. So you subtract 273.15 from that side. Anything you do to one side of the equal sign you have to do to the other side, so also subtract 273.15 from K (1,376.06).

1,376.06 - 273.15 = {1102.91°C}

The medium that might be used to cool the hot liquid coming from a reactor is : ( C ) Heat exchanger

Heat exchanger is used  for the transfer of heat between liquids to be used in a chemical reaction, It can be used for both Cooling and heating to achieve the desired temperature.

The liquid coming from a reactor which posses a very high temperature will be passed through the heat exchanger so that its temperature will attain the required temperature for the experiment.

Hence we can conclude that The medium that might be used to cool the hot liquid coming from a reactor is Heat exchanger.

Learn more about heat exchanger : https://brainly.com/question/25154137

Another advantage of advantage of using a microspectrophotometer to analyze fibers asides not causing damage to the sample is that the sample can be quite small.

Microspectrophotometry is a biological technique used to measure the absorption or transmission spectrum of a solid or liquid material in either transmitted or reflected light.

Microspectrophotometry can also measure the emission of light by a sample, which is usually small as the micro implies.

One advantage of microspectrophotometry is that the sample does not get damaged. However,

However, another advantage of advantage of using a microspectrophotometer to analyze fibers asides not causing damage to the sample is that the sample can be quite small.

Learn more about microspectrophotometry at: https://brainly.com/question/5832827

Answer:

The visual seems to be showcasing an erupting volcano, so I don't believe the two are related.

Explanation:

This is because amino group of p-aminobenzoic acid is an aniline and is less electrophilic than an alkyl amine.

This is an aromatic amine which consists of a phenyl group attached to an amino group.

The amino group of p-aminobenzoic acid being an aniline makes it less electrophilic which is why an alkyl amine participates in the reaction instead.

Read more about Aniline here https://brainly.com/question/9982058

The amino group of p-aminobenzoic acid does not participate in the reaction as this is an aniline and is less electrophilic than an alkyl amine.

Aniline is an aromatic amine molecule in which phenyl group is attached with an amino group.

The amino group present in the p-aminobenzoic acid behave as an aniline as a result of which it becomes less electrophilic in nature and this is the reason why an alkyl amine participates in the reaction instead of the p-aminobenzoic acid.

Hence amino group of p-aminobenzoic acid is less electrophilic in nature and that's why not participate in the reaction.

To know more about aniline, visit the below link:
https://brainly.com/question/24316939

#SPJ4

In a redox reaction, electron could be lost or gained. The coefficients in the balanced redox reaction are;  1/2, 5, 1, 5, 2, 1.

A redox reaction equation shows the species that were oxidized or reduced in a redox reaction. In this case, we are asked for the coefficients in a balanced redox reaction equation.

We must recall that five electrons were lost/gained in the process hence the balanced reaction equation is;

1/2I2 + 5HNO3 -----> IO3^- + 5NO2 + 2H2O + H^+

The coefficients in the balanced equation therefore are; 1/2, 5, 1, 5, 2, 1.

Learn more about redox reaction: https://brainly.com/question/13293425

The following redox equation is balanced with the smallest whole number coefficients, the coefficient for nitrogen dioxide will be 10.

In redox reaction, there is transfer of electrons between the species of the reactions.

The given redox reaction is

[tex]\rm I2 (s) + HNO_3 (aq) -- > HIO_3 (aq) + NO_2 (g) + H_2O[/tex]

To find coefficient of the compounds of the reaction, there are coefficient calculator present.

Thus, the coefficient for nitrogen dioxide will be 10.

Learn more about redox reactions

https://brainly.com/question/13293425

#SPJ4

Answer:

Three principal theories about acid-base are,

1. Arrhenius theory

2. Bronsted-Lowry theory

3. Lux-Flood definition

4. Lewis theory

5. Usanovich definition

1. According to the Arrhenius, acids give up hydrogen ion in aqueous medium and a base give up hydroxyl ion in its aqueous medium. Examples are aqueous solution of HCl, CH3COOH, PhCOOH, and H2SO4. These give up H+ in an aqueous medium. Aqueous solutions of NaOH, Ca (OH)2 are Arrhenius bases.

Arrhenius theory has some limitations. This theory cannot explain the acidic nature of BF3 or basic behavior of NH3. This theory fails to give any explanation about acidity and basicity which does not produce H+ and OH- in their aqueous solutions.

2. According to the Bronsted-Lowry, an acid releases proton and a base accepts proton. NH3 accepts proton and forms ammonium ion, so ammonia acts as a base.

But this theory also has limitations. According to this theory acidic behavior of BF3 still cannot be explained.

3. Lux-Flood describes the acid-base theories based on oxide ion transformation. It gives clear explanation for acid-bases theories of non-protonic system. According to them, a base will donate the oxygen atom and an acid will accept oxygen atom.

4. According to the Lewis theory, acids are those substances which accept electron pair and base are those substances which donates electron pairs. Lewis theory can explain the acidic nature of BF3. In BF3, B is two electrons short to fulfil its octet. So it can accept a pair of electrons from an electron donating substituent. So it is an electron pair acceptor compound and acts as an acid.

Substances which have π electrons can donate electron pair to an electron deficient substance and acts as a base. Ethylene and acetylene is Lewis bases. AlCl3, PCl3 are Lewis acids.

5. According Usanovich, an acid is some chemical species which would react with bases and yields cations or accepts anions or electrons. A base is some chemical species which would react with acids, yield anions or electrons or combine with cations.

Explanation:

We can store the copper sulphate solution in alumiun container, if cover on alumiun is present.

Aluminium is more reactive than copper so the Aluminium will displace copper sulphate from its solution by reacting with it but if there is cover on the aluminium then the alumium can't react with copper.

So we can store the copper sulphate solution in alumiun container.

Learn more about container here: https://brainly.com/question/11459708

No, we cannot store CuSO₄ in an aluminum container because aluminum will displace the copper present in the solution.

Different chemicals are put in different containers, usually glass, plastic, dark container, or light container.

Chemicals element are reactive to different substances and to each other.

That's why they are put in separate and different types of containers according to their reactivity.

Thus, No, we cannot store CuSO₄ in an aluminum container because aluminum will displace the copper present in the solution.

Learn more about copper sulfate

https://brainly.com/question/22560035

#SPJ4

Answer:

They are food for some animals. Some animals use them for nesting material. Humans can dry and burn some types of nonvascular plants as a fuel.

Explanation:

Some nonvascular plants produce various nutrients that are passed to the soil and can be used by other plants. Also, nonvascular plants that cover a large surface area help maintain the cohesion of the land by reducing the risk of erosion. Nonvascular plants are also very important to animals.

                                                  Hope it helps

                                                      Be great

Option C) 19.3L is the correct answer.

Hence, the final volume of the gas at the standard atmospheres and temperature is 19.3L.

Given the data in the question;

At Standard temperature and pressure( STP)

Then

Final Volume; [tex]V_2 = \ ?[/tex]

Combined gas law combines both Boyle's Law, Charles's Law, and Gay-Lussac's Law. It states that the ratio of the product of volume and pressure and the absolute temperature of a gas is equal to a constant.

It is expressed as;

[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}[/tex]

To determine the new volume of the gas, we substitute our values into the expression above.

[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2}\\\\P_1V_1T_2 = P_2V_2T_1\\\\1.00atm * 29.3L * 250.15K = 1.39atm * V_2 * 273.15K\\\\7329.395atm.L.K = 379.6785atm.K * V_2\\\\V_2 = \frac{7329.395atm.L.K}{379.6785atm.K} \\\\V_2 = 19.3L[/tex]

Option C) 19.3L is the correct answer.

Hence, the final volume of the gas at the standard atmospheres and temperature is

Learn more about the combined gas law: https://brainly.com/question/25944795

Answer:

so what do you need help with?

Explanation:

Answer:

what do you need help with i will try to answer

Explanation:

Answer:

Decomposition reaction

Explanation:

When a single reactant is decomposed into two or more products that reaction is called decomposition reaction.

Option B is correct

Answer:

Reflection

Hope it will help you

Answer:

A. Things are measured the same way each time.

Explanation:

Saturated solution refer to a solution in which the dissolved solute is in equilibrium with the undissolved solute.

A saturated solution is a chemical solution that contain maximum amount of a solute which is dissolved in the solvent. The addition of anotheg solute will not dissolve in a saturated solution. The amount of solute that can be dissolved in a solvent to form a saturated solution depends on a variety of factors.

Therefore, Saturated solution refer to a solution in which the dissolved solute is in equilibrium with the undissolved solute

Learn more about saturated solution here.

https://brainly.com/question/26765872

The term that describes a solution in which the dissolved solute is in equilibrium with the undissolved solute is saturated solution.

A saturated solution is one in which there is so much solute that it would not dissolve if there was anymore.

When a saturated solution comes into contact with more solute, the extra solute does not dissolve or deposit.

Thus, the term that describes a solution in which the dissolved solute is in equilibrium with the undissolved solute is saturated solution.

Learn more about saturated solutions

https://brainly.com/question/1851822

#SPJ4

Answer:

b. nuclear fuel has a higher energy density than fossil fuels.

Explanation:

Nuclear fuel is a quantity of energy measured in joules; therefore, it has the same units as electrical and mechanical energy.

Answer:

Negative impacts include: noise, air and odour pollution from collection and reprocessing facilities; costs to set up recycling infrastructure and education materials for new areas; and costs associated with innovations and technologies, which are likely to be passed on to end consumers in product prices.

Explanation:

Answer:

204,375 mL.

Explanation:

327 mL - 3.2 M

x mL - 2 M

x= (2 M x 327 mL) /3.2 M

x= 204,375 mL.