Answer:
The car's final speed will be 28 m/s
Explanation:
We can use the kinematics equation
[tex]v_f=v_0+at[/tex]
Note
[tex]v_f[/tex] is the final velocity
[tex]v_0[/tex] is the initial velocity
[tex]a[/tex] is the acceleration
[tex]t[/tex] is the time
We are given
[tex]v_0=0\\a=7\\t=4[/tex]
Lets evaluate [tex]v_f[/tex].
Substituting our values into the equation gives us
[tex]v_f=0+7*4[/tex]
Lets simplify
[tex]v_f=7*4[/tex]
[tex]v_f=28[/tex]
A truck is carrying a refrigerator as shown in the figure. The height of the refrigerator is 158.0 cm, the width is 60.0 cm. The center of gravity of the refrigerator is 67.0 cm above the midpoint of the base.
What is the maximum acceleration the truck can have so that the refrigerator doesn't tip over? (The static friction between the truck and the refrigerator is very large.)
The maximum acceleration the truck can have so that the refrigerator does not tip over is 1.86m/s².
What is acceleration?Acceleration is the change in velocity with time.
The maximum acceleration is obtained by taking moments about the tipping point of rotation.
Moment = force * perpendicular distanceClockwise moment = Anticlockwise momentF₂ * 1.58 m = F₁ * 0.67 m
where
F₂ is tipping force = mass * acceleration, a
F₁ is weight = mass * acceleration due to gravity, g
The weight acts at a distance half the width of the refrigerator = 30 cm or 0.3 m
Height of refrigerator is 158 cm 0r 1.58 cm
m * a * 1.58 = m * 9.81 * 0.30
a = 1.86 m/s²
The maximum acceleration the truck can have so that the refrigerator does not tip over is 1.86m/s².
In conclusion, if the maximum acceleration is exceeded, the refrigerator will tip over.
Learn more about acceleration at: https://brainly.com/question/14344386
#SPJ1
A person standing at the edge of a cliff throws one ball straight up and another ball straight down, each at the same initial speed. Neglecting air resistance, which ball hits the ground below the cliff with the greater speed?
a quantity of gas is contained in a sealed container of fixed volume the temperature of the gas is increased
The average kinetic energy of the gas's molecules directly relates to its temperature. Faster moving particles will more frequently and violently hit the container walls. Because of this, the force acting on the container's walls increases, increasing the pressure.
What happens when the temperature of a gas is increased?We know that temperature is proportional to the average kinetic energy of a sample of gas. The proportionality constant is (2/3)R and R is the gas constant with a value of 0.08206 L atm K-1 mol-1 or 8.3145 J K-1 mol-1.The average kinetic energy and the velocity of the gas particles striking the container walls rise as the temperature rises. As the temperature rises, the pressure must as well since pressure is the force the particles per unit of area exert on the container.The molecules in a gas gain more energy and can move more quickly as it is heated. The pressure will rise, and there will be greater impacts on the container walls. On the other hand, cooling the molecules will cause them to slow down and lower the pressure.To learn more about gas volume and temperature, refer to:
https://brainly.com/question/26141963
#SPJ9
When the volume of gas increased the KE of gases particles increases and hit the walls of container which increases the pressure on the walls .
What if gas will increase?
The gas expands in a closed container . The molecules strike and hit each other therefore the pressure at the walls increase.
According to ideal gas law , when volume is cnstant the Pressure and temperature both will increase.
to learn more about Gas laws click herehttps://brainly.com/question/17817006
#SPJ9
Based on the way living things are organized ehat level combines to form organ ststems
Answer:
Higher levels of organization are built from lower levels.
Molecules combine to form cells.
Cells combine to form tissues.
Tissues combine to form organs.
Organs combine to form organ systems,
and organ systems combine to form organisms.
Explanation:
Hope it helps.
describe one similarity and one difference between the velocity on the reference circle and the velocity on the pendulum
SHM can be acquired by perpendicular projection of uniform circular motion of a particle on its diameter such a particle is called reference particle and its circular path is called reference circle.
A pendulum reaches its maximum velocity when the block is at its lowest point (the pendulum is vertical and pointing straight down). We can then use the term for conservation of energy to determine the maximum height of the block.
What is the velocity at the bottom of a pendulum?
As the pendulum swings downward, gravity converts this potential energy into kinetic energy, so that at the bottom of the swing, the pendulum bob has zero potential energy, and its kinetic power, (1/2)mv2, equals the initial potential energy (mgh). (So the velocity, v, equals √(2gh).)
To learn more about pendulum, refer
https://brainly.com/question/26449711
#SPJ9
A 40.0 kg beam is attached to a wall with a hi.nge and its far end is supported by a cable. The angle between the beam and the cable is 90°. If the beam is inclined at an angle of θ = 31.0° with respect to horizontal..
1. What is the horizontal component of the force exerted by the hi.nge on the beam? (Use the `to the right' as + for the horizontal direction.)
2. What is the magnitude of the force that the beam exerts on the hi.nge?
The tension in the cable is 380.55 N and the vertical component of the force exerted by the hi.nge on the beam is 11.45 N.
Tension in the cableApply the principle of moment and calculate the tension in the cable;
Clockwise torque = TL sinθ
Anticlockwise torque = ¹/₂WL
TL sinθ = ¹/₂WL
T sinθ = ¹/₂W
T = (W)/(2 sinθ)
T = (40 x 9.8)/(2 x sin31)
T = 380.55 N
Vertical component of the forceT + F = W
F = W - T
F = (9.8 x 40) - 380.55
F = 11.45 N
Thus, the tension in the cable is 380.55 N and the vertical component of the force exerted by the hi.nge on the beam is 11.45 N.
Learn more about tension here: brainly.com/question/24994188
#SPJ1
Calculate the speed of a satellite moving in a stable circular orbit about the Earth at a height of 4930 km .
The speed of the satellite moving in a stable circular orbit about the Earth is 5,916.36 m/s.
Speed of the satellite
v = √GM/r
where;
M is mass of EarthG is universal gravitation constantr is distance from center of Earth = Radius of earth + 4930 kmv = √[(6.626 x 10⁻¹¹ x 5.97 x 10²⁴) / ((6371 + 4930) x 10³)]
v = 5,916.36 m/s
Thus, the speed of the satellite moving in a stable circular orbit about the Earth is 5,916.36 m/s.
Learn more about speed here: https://brainly.com/question/6504879
#SPJ1
What is the fastest possible speed called in our universe and what is the equation for it?
Answer:
The speed of light traveling through a vacuum is exactly 299,792,458 meters (983,571,056 feet) per second. That's about 186,282 miles per second — a universal constant known in equations as "c," or light speed.
[tex]s\frac{d}{t}[/tex]
Explanation:
hope this helps you my friend
Three equal positive charges 'q' are at the corners of an equilateral triangle of side 'a'.
a. Assuming that the three charges together create an electric field, find the location of a point other than the obvious one where the electric field is zero.
b. What is the magnitude and direction of the electric field at the top corner due to the two charges at the base?
(a) The location of a point where the electric field is zero is at the center of the triangle which is equal to ¹/₆√3a.
(b) The magnitude and direction of the electric field at the top corner due to the two charges at the base is 1.732 kq/a².
Position where the electric field is zero
The electric field is zero at the center of the equilateral triangle whose magnitude is equal to √3a/6.
Electric field at top corner due to two charges at the baseE = E₁ + E₂
where;
E₁ is electric field at the left base cornerE₂ is electric field at the right base cornerE = kq/a²[(cos 60i + sin 60j) + (-cos 60i + sin 60j)]
E = kq/a²[2(sin 60j)] = 1.732 kq/a²
Thus, the location of a point where the electric field is zero is at the center of the triangle which is equal to ¹/₆√3a.
The magnitude and direction of the electric field at the top corner due to the two charges at the base is 1.732 kq/a².
Learn more about electric field here: https://brainly.com/question/14372859
#SPJ1
please help me with this physics question ASAP
Answer:
See below
Explanation:
With switches open, the circuit is a simple series circuit ....the ammeters will have the same readings
V = IR
I = V/R = 5 / (10+5+5) = .25 A
b) With S1 closed 5 ohm and 10 ohm in parallel become = 5 *10 / (5+10) = 3.33 ohm
then the series circuit current becomes
5 v / ( 10 + 3.33 + 5 ) = ammeter 1 = .273 amps
ammeter 2 will get a portion of this ...the smaller resistor will get 2/3 ...the 10 ohm resistor will get 1/3 .273 * 10 / 15 =.182 amps
Two planets X and Y travel counterclockwise in circular orbits about a star, as seen in the figure.
The radii of their orbits are in the ratio 4:3. At some time, they are aligned, as seen in (a), making a straight line with the star. Five years later, planet X has rotated through 88.0°, as seen in (b).
1. By what angle has planet Y rotated through during this time?
The angle of the planet is mathematically given as
dY= 704 degrees
What angle has planet Y rotated through during this time?With Kepler's third rule, which states that a planet's orbit squared is a function of cubed radius, we can prove that this is the case.
Generally, the equation for the period is mathematically given as
(periodX / periodY)^2 = (radius X / radius Y)^3
Therefore
(pX / pY)^2 = 4^3
(pX / pY)^2 = 64
\sqrt{(pX / pY )^2}= \sqrt{64}
(pX / pY=8
In conclusion, Because it takes 8 times longer to complete one orbit on planet X, planet Y travels 8 times farther than planet X does in the same time period...
planet Y travels ;
dY=8 * 88.0
dY= 704 degrees
Read more about Kepler's third rule
https://brainly.com/question/1086445
#SPJ1
Which of the following is an example of an offensive action?
An example of an offensive action is B. kicking a ball into the goal
Something that is offensive upsets or embarrasses people because it is rude or insulting.
What is a example of an offensive action?Offensive is an arranged campaign or plan of action, normally created by the military or planned to achieve some specific political aim or goal. A military plan to strike is an example of a military offensive. A plan to fight the war on medications is an instance of an offensive.
What are the types of offensive operations?The four types of offensive operations are move to contact, attack, exploitation, and pursuit.
Leaders direct these offensive operations sequentially and in combination to generate highest combat power and destroy the enemy.
To learn more about an offensive action, refer
https://brainly.com/question/18732645
#SPJ9
Define the term work and state its unit. An ant is dragging a house-fly and the elephant is pushing a big tree which is not moving. Who is doing work, the ant or the elephant? Justify your answer. 922.5 205
Ant is performing a work
what is work?
Work is the force applied on an individual with respect to displacement.
Work = Force × displacement
Unit is Nm
Elephant is pushing bt there is no displacement occurred so the work of elephant is zero.
to learn more about work click https://brainly.in/question/3727463
The ant works, but the elephant does not.
Who works, how do find the ant and the elephant?Work done = Force × Displacement.
If there are ants and houseflies,
Ants drag the house bug, so they use specific force to move the house bug from one point to another, so we can say they work.
In the case of the elephant and the tree,
When the elephant pushes the tree (applying a force), the tree does not move, i.e., there is no displacement, so there is work.
Work done = Force × Displacement
= Force × 0
= 0
Therefore,
The ant works, but the elephant does not.
To learn more about Who is doing work, refer to:
https://brainly.com/question/26355886
#SP9
A crate with a mass of 175.5 kg is suspended from the end of a uniform boom with a mass of 94.7 kg. The upper end of the boom is supported by a cable attached to the wall and the lower end by a pivot (marked X) on the same wall.
Calculate the tension in the cable.
The tension, T in the cable is equal to 323.5 N.
What is the tension?Tension is force exerted by a cable or string on another object usually a weight suspended from the cable or string
The tension in the cable is found this:
Angle of the boom with horizontal, θ = tan⁻¹(5/10) = 26.56°
The angle of cable with horizontal, B = tan⁻¹(4/10) = 21.80
Taking moments about the pivot:
175.5 * cos 26.56 + 94.7 * cos 26.56 * 0.5 = T (sin(26.56 + 21.80) * 1
T = 241.68/0.747
T = 323.5 N
In conclusion, the tension in the cable is determined by taking moments about the pivot.
Learn more about tension at: https://brainly.com/question/24994188
#SPJ1
Which type of wave interaction is shown in the photo?
The wave interaction that is shown in the photo is refraction as light moves from air to water.
What is refraction?Refraction refers to the change in the frequency of a wave and the direction of the wave as it moves from one medium to another. We know that waves makes a body under water to look slightly different than when it is in air.
Thus, the wave interaction that is shown in the photo is refraction as light moves from air to water.
Learn more about refraction:https://brainly.com/question/14760207
#SPJ1
A certain kind of glass has an index of refraction of 1.640 for blue light of wavelength 440 nm and an index of 1.600 for red light of wavelength 690 nm. If a beam containing these two colors is incident at an angle of 30.0° on a piece of this glass, what is the angle between the two beams inside the glass?
The angle between the two beams inside the glass is mathematically given as
<(BR)= 0.563°
What is the angle between the two beams inside the glass?Generally, the equation for an angle for blue is mathematically given as
[tex]< B= arcsin( sin\theta / i )[/tex]
Therefore
<B= arcsin( sin30 / 1.660 )
<B= 17.53°
For angle for red
<R= arcsin(sin30 / 1.610)
<R= 18.09°
For the angle in between
<(BR)= 18.093 - 17.530
<(BR)= 0.563°
In conclusion, the angle between the two beams inside the glass
<(BR)= 0.563°
Read more about angle
https://brainly.com/question/13954458
#SPJ1
What is the resistance of a carbon rod at 25.8 ∘C if its resistance is 0.0200 Ω at 0.0 ∘C ?
0.02020 ohm is the resistance of a carbon rod at 25.8 ∘C if its resistance is 0.0200 Ω at 0.0 ∘C.
What is a resistor?A resistor is an electrical component that controls or restricts how much electrical current can pass across a circuit in an electronic device. A specified voltage can be supplied via resistors to an active device like a transistor.
The temperature of the resistor varies based on the variation in the temperature. The equation that describes the relationship between the two of them is:
R = R0[1+ alpha(T-T0)] where:
R is the new resistance we are looking for
alpha is the temperature coefficient of resistance. For carbon rod, alpha = ₋ 4.8 x [tex]10^{-4}[/tex](1/°c)
T0 is the standard temperature =25.8°C
R0 is the resistance at T0 = 0.0200 ohms
T is the temperature at which we want to get R = 0
Substitute in the equation to get R as follows:
R = 0.0200 [1+( ₋ 4.8 x [tex]10^{-4}[/tex]) (0-25.8)] = 0.02020 ohm
To know more about resistance refer to: https://brainly.com/question/11431009
#SPJ1
I need help with my homework
C. The center of mass and center of gravity will coincide if the acceleration due to gravity is constant or uniform.
What is center of mass?The center of mass of an object is the unique point where the weighted relative position of the distributed mass sums to zero.
What is center of gravity?Center of gravity is the point from which the weight of a body or system may be considered to act.
Thus, the center of mass and center of gravity will coincide if the acceleration due to gravity is constant or uniform.
Learn more about center of gravity here: https://brainly.com/question/874205
#SPJ1
When using a stream table in a classroom setting what are three factors that can be controlled?
Answer:
These include the slope of the land, the nature of the land surface, the placement of dams, and the direction of topsoil disturbance as created by farming activities. Materials: Students should work in groups of 3 or 4, or as materials allow.Explanation:
Hope this helpsif f=30 m=4 calculate value of m in equation
m=f/a
Answer:
a = 7.5
Explanation:
m = f/a
f = 30
m = 4
Thus;
a = f/m
a = 30/4
a = 7.5
Two vectors A and B have precisely equal magnitudes. In order for the magnitude of A + B to be larger than the magnitude of A - B by the factor n, what must be the angle between them?
Answer:
[tex]\alpha=arccos[\frac{(a^2+b^2)(n-1)}{2ab(n+1)}].[/tex]
Explanation:
1) for A+B: a²+b²-2abcos(π-α);
2) for A-B: a²+b²-2abcos(α);
3) according to the condition (A+B):(A-B)=n, then
[tex]n=\frac{a^2+b^2-2abcos(\pi-a)}{a^2+b^2-2abcos(a)}; \ = > \ n=\frac{a^2+b^2+2abcos(a)}{a^2+b^2-2abcos(a)}; \ = > \ cos(\alpha)=\frac{(a^2+b^2)(n-1)}{2ab(n-1)}.[/tex]
Which best describes the results of Becquerel’s experiments?
Both forming images when placed in their respective places best describes Becquerel’s experiments.
What is Becquerel’s experiment?This was conducted by Henri Becquerel in which he sought to know how uranium salts are affected by light.
He discovered that the salts emits a penetrating radiation and formed an image in the presence of light but didn't form any in darkness.
Read more about Becquerel’s experiment here https://brainly.com/question/27584302
#SPJ1
Given that the acceleration of gravity at the surface of Mars is 0.38 of what it is on Earth, and that Mars' radius is 3400 km , determine the mass of Mars.
The mass of the planet Mar, given the data from the question is 6.45×10²³ Kg
Data obtained from the questionAcceleration due to gravity of Earth = 9.8 m/s²Acceleration due to gravity of Mar (g) = 0.38 × 9.8 = 3.724 m/s²Gravitational constant (G) = 6.67×10¯¹¹ Nm²/Kg²Radius (r) = 3400 Km = 3400 × 1000 = 3400000 mMass (M) =? How to determine the mass of Marg = GM / r²
Cross multiply
GM = gr²
Divide both sides by G
M = gr² / G
M = (3.724 × 3400000²) / 6.67×10¯¹¹
M = 6.45×10²³ Kg
Learn more about gravitational force:
https://brainly.com/question/21500344
#SPJ1
The light beam shown in the figure below makes an angle of = 24.8° with the normal line NN' in the linseed oil. Determine the angles and '. (The refractive index for linseed oil is 1.48.)
The angle of refraction of the light beam is determined as 16.46 ⁰.
Angle of refraction of the light beamn = sin i / sin r
where;'
n is refractive indexi is angle of incidencer is angle of refractionAngle between the ray and the normal = incident angle = 24.8⁰
1.48 = sin (24.8) / (sin r)
sin r = sin (24.8) / (1.48)
sin r = 0.283
r = sin ⁻¹(0.283)
r = 16.46 ⁰
Thus, the angle of refraction of the light beam is determined as 16.46 ⁰.
Learn more about angle of refraction here: https://brainly.com/question/15838784
#SPJ1
Checking the what will reduce the possibility of having to rebuild or replaced the engine?
Checking the oil will reduce the possibility of having to rebuild or replaced the engine.
what is an engine ?
A device created to transform one or more sources of energy into mechanical energy is known as an engine or motor. Potential energy, heat energy, chemical energy, electric potential, and nuclear energy are all forms of energy that are readily available.
The lubricating function of engine oil is crucial. It shields and stops all the moving parts from rubbing against one another. Metal-on-metal wear would quickly kill your engine without lubrication.
Learn more about engine here:-
https://brainly.com/question/4690455
#SPJ1
A boat moves through the water with two forces acting on it. One is a 1,575-N forward push by the water on the propeller, and the other is a 1,200-N resistive force due to the water around the bow. (Review attachment)
(a) What is the acceleration of the 1,100-kg boat?
______ m/s2
(b) If it starts from rest, how far will the boat move in 20.0 s?
______ m
(c) If it starts from rest, how far will the boat move in 20.0 s?
______ m/s
(a) The acceleration of the 1,100-kg boat is 0.341 m/s².
(b) The distance covered by the boat is 68.2 m.
(c) The speed of the boat is 6.82 m/s.
Acceleration of the boat
Net force on the boat = 1,575 N - 1,200 N = 375 N
F(net) = ma
a = F(net)/m
a = 375/1100
a = 0.341 m/s²
Distance moved in 20 ss = ut + ¹/₂at²
s = 0 + ¹/₂(0.341)(20)²
s = 68.2 m
Speed of the boat in 20 sv = u + at
v = 0 + 0.341(20)
v = 6.82 m/s
Thus, the acceleration of the 1,100-kg boat is 0.341 m/s², the distance covered by the boat is 68.2 m and the speed of the boat is 6.82 m/s.
Learn more about acceleration here: https://brainly.com/question/14344386
#SPJ1
Calculate the de Broglie wavelength of a 0.56 kg ball moving with a constant velocity of 26 m/s (about 60 mi/h)
The de Broglie wavelength of a 0.56 kg ball moving with a constant velocity of 26 m/s is 4.55×10⁻³⁵ m.
De Broglie wavelength:The wavelength that is incorporated with the moving object and it has the relation with the momentum of that object and mass of that object. It is inversely proportional to the momentum of that moving object.
λ=h/p
Where, λ is the de Broglie wavelength, h is the Plank constant, p is the momentum of the moving object.
Whereas, p=mv, m is the mass of the object and v is the velocity of the moving object.
Therefore, λ=h/(mv)
λ=(6.63×10⁻³⁴)/(0.56×26)
λ=4.55×10⁻³⁵ m.
The de Broglie wavelength associated with the object weight 0.56 kg moving with the velocity of 26 m/s is λ=4.55×10⁻³⁵ m.
Learn more about de Broglie wavelength on
https://brainly.com/question/15330461
#SPJ1
It's a snowy day and you're pulling a friend along a
level road on a sled. You've both been taking physics,
so she asks what you think the coefficient of friction
between the sled and the snow is. You've been
walking at a steady 1.5 m/s, and the rope pulls up
on the sled at a 35 ° angle. You estimate that the
mass of the sled, with your friend on it, is 57 kg and
that you're pulling with a force of 75 N
The coefficient of friction between the sled and the snow is 0.119.
To find the answer, we need to know about the friction.
How to find the coefficient of friction between the sled and the snow?Whenever a body moves over the surface of another body, a force come into play, which acts parallel to the surface of contact and oppose the relative motion. This opposing force is called friction.To solve the problem, we have to draw the free body diagram of the given system.We have given with the following values,[tex]a=0\\\alpha =35^0\\T=75N\\m=57kg[/tex]
Here, acceleration will be equal to zero, because the velocity is given as constant.
Thus, from the diagram, we can write the balancing equations as follows,[tex]ma=Tcos\alpha -f\\\where\\f=kN\\\N+Tsin\alpha=mg\\Thus,\\N=mg-Tsin\alpha[/tex]
Substituting N in f and f in the equation of ma, then we get,[tex]ma= Tcos\alpha -k(mg-Tsin\alpha )[/tex]
Substituting values, we get the coefficient of friction as,[tex]0=(75*cos35)-k((57*9.8)-(75sin35))\\\\k((57*9.8)-(75sin35))=(75*cos35)\\\\515.6k=61.44\\\\k=\frac{61.44}{515.6}=0.119[/tex]
Thus, we can conclude that, the coefficient of friction between the sled and the snow is 0.119.
Learn more about the friction here:
https://brainly.com/question/28107059
#SPJ1
The sled's coefficient of friction with the snow is 0.119.
We must understand the friction in order to choose the solution.
How can I determine the sled and snow's coefficient of friction?A force that works parallel to the surface of contact and opposes the relative motion is present whenever one body moves over the surface of another body. Friction is the name for this opposing force.We must create the given system's free body diagram in order to solve the issue.The values that we have provided are[tex]\alpha =35\\T=75N\\m=57kg\\a=0[/tex]
Because the velocity is specified as constant in this case, the acceleration will be equal to zero.
Consequently, we can express the balancing equations as follows using the diagram:[tex]ma=Tcos\alpha -f\\ where,f=kN\\N+Tsin\alpha =mg\\ thus,\\N=mg-Tsin\alpha[/tex]
When we substitute N for f and f in the equation for ma, we obtain,[tex]ma=Tcos\alpha -k(mg-Tsin\alpha )[/tex]
By substituting values, we obtain the friction coefficient as.[tex]k=0.119[/tex]
As a result, we may say that there is 0.119 coefficient of friction between the sled and the snow.
Learn more about the friction here:
https://brainly.com/question/31226
#SPJ1
a 5.5kg bowling ball has a weight on earth closest to what in N
The weight of the body is obtained as 53.9 N.
What is the weight of an object?The term weight refers to the product of the mass and the acceleration due to gravity.
Now we have the mass of the body as 5.5kg and the acceleration due to gravity as 9.8 m/s^2.
It the follows that the weight is;
W = mg = 5.5kg * 9.8 m/s^2 = 53.9 N
Learn more about weight:https://brainly.com/question/10069252
#SPJ1
Two planets X and Y travel counterclockwise in circular orbits about a star, as seen in the figure.
The radii of their orbits are in the ratio 4:3. At some time, they are aligned, as seen in (a), making a straight line with the star. Five years later, planet X has rotated through 88.0°, as seen in (b). By what angle has planet Y rotated through during this time?
Answer: Two planets X and Y travel counterclockwise in circular orbits about a star, as seen in the figure. The radii of their orbits are in the ratio 4:3. At some time, they are aligned, as seen in (a), making a straight line with the star. Five years later, planet X has rotated through 88.0°, as seen in (b). Then, at an angle 135.48°, the planet Y rotated through during this time.
Explanation: To find the answer, we need to know about the Kepler's third law of planetary motion.
What is Kepler's third law of planetary motion?Kepler's third law of planetary motion states that, the square of the period of revolution is proportional to the cube of the orbital radius of the elliptical path.It can be expressed as,T² ∝ r³
How to solve the problem?We have given with the ratio of the radii of their orbits as,4:3.planet X rotated through an angle of 88°.thus,[tex]\frac{r_1}{r_2}=\frac{4}{5} \\\frac{T_1}{T_2} =(\frac{r_1}{r_2})^{3/2}\\[/tex]
As we know that,[tex]T=\frac{2\pi }{w}[/tex] where, w is the angular velocity.
Angular displacement is the angle swept by the position vector of a particle in a given interval of time.[tex]\alpha[/tex] =wt.
We can rewrite our equation as,[tex]\frac{T_x}{T_y}=\frac{w_y}{w_x}\\thus,\\\frac{w_y}{w_x}=(\frac{r_1}{r_2})^{3/2}[/tex]
We have to find the angle rotated by planet Y during 5 yrs. So, we can rewrite the above equation in terms of angular displacement.[tex]\frac{\alpha _y}{\alpha _x} = (\frac{r_1}{r_2})^{3/2}\\where,\\\alpha _x=\frac{88^0}{5 yrs} because,\\here, angle \beta_x =88^0.\\[/tex]
Thus, the angle rotated by planet Y during 5 yrs will be [tex]\beta _y[/tex] =[tex]\alpha _y=\frac{88}{5yrs} *(\frac{4}{3} )^{3/2}=\frac{135.48^0}{5yrs} .\\thus,\\\beta _y=135.48^0.[/tex]
Thus, we can conclude that the angle rotated by planet Y during 5 yrs will be 135.48 degrees.
Learn more about the Kepler's third law of planetary motion here:
https://brainly.com/question/28105769
#SPJ4
The planet Y then rotated through at this time at an angle of 135.48°.
In order to understand the solution, we must be familiar with Kepler's third law of planetary motion.
What does the third law of planetary motion by Kepler say?According to Kepler's third law of planetary motion, the elliptical path's orbital radius is proportional to the cube of the square of the revolution's period.It can be stated as follows:T² ∝ r³
How can the issue be resolved?The ratio of their orbital radii that we have provided is 4:3.Planet X rotated at an 88° angle. thus,[tex]\frac{R_1}{R_2}=\frac{4}{5} \\\frac{T_1}{T_2}=(\frac{4}{5} ) ^{\frac{3}{2} }[/tex]
As we are aware,[tex]T=\frac{2\pi }{w}[/tex]
where w is the angle of rotation per time.
The angle that a particle's position vector sweeps over in a specific amount of time is known as the angular displacement.[tex]\alpha[/tex]=wt.
Our equation can be rewritten as,[tex]\frac{w_y}{w_x} =(\frac{4}{5} ) ^{\frac{3}{2} }[/tex]
We have to find the angle that planet Y rotated at over the course of five years. Consequently, we can express the equation above in terms of angular displacement.[tex]\frac{\alpha _y}{\alpha _x}=(\frac{4}{3} ) ^{\frac{3}{2} } , where\\\alpha _x=\frac{88}{5yrs} \\[/tex]
So, during a period of five years, planet Y will rotate at an angle,[tex]\alpha _y=\frac{88}{5yrs} *(\frac{4}{3} ) ^{\frac{3}{2} }=\frac{135.48}{5yrs}[/tex]
Thus, we may infer that planet Y will revolve at an angle of 135.48 degrees during the course of five years.
Learn more about the Kepler's law of planetary motion here:
https://brainly.com/question/28105769
#SPJ1