4. (a) 1l of water weighs almost 0,995 kg. What will 50 l of water weigh? What will 0,5 l of water weigh? (b​

The surface area of the cylinder is 32π square inches.

The surface area of a cylinder is given by the formula:

A = 2πr(r + h)

where r is the radius and h is the height of the cylinder.

In this case, the radius is 2 in and the height is 6 in. Therefore, we have:

A = 2π(2)(2 + 6)

A = 2π(2)(8)

A = 32π

So the surface area of the cylinder is 32π square inches.

If we want to express the answer in terms of pi, then this is the final answer. If we want a numerical approximation, we can use a calculator and get:

A ≈ 100.53 square inches

Learn more about the Surface area here:

https://brainly.com/question/29298005

#SPJ1

True: Regression calculations are typically done on a computer because the calculations can be quite tedious and lengthy.

A regression is a statistical technique that relates a dependent variable to one or more independent (explanatory) variables. A regression model is able to show whether changes observed in the dependent variable are associated with changes in one or more of the explanatory variables

True. Regression calculations involve complex mathematical computations and analyzing large datasets, which can be time-consuming and prone to errors if done manually. Using a computer with specialized software can automate the process, making it faster, more accurate, and efficient.

Know more about Regression here:

https://brainly.com/question/31735997

#SPJ11

To determine how many compact fluorescent light bulbs and how many square feet of insulation to purchase, we need to make some assumptions about the cost and energy savings of each. Let's assume the following:

Each compact fluorescent light bulb costs $5 and lasts for 5 years. It uses 13 watts of power and provides the same amount of light as a 60 watt incandescent bulb.

Each square foot of insulation costs $0.50 and provides a 10% reduction in heating and cooling costs.

Let $x$ be the number of compact fluorescent light bulbs and $y$ be the number of square feet of insulation to purchase. Then we want to maximize the annual energy cost savings, subject to the constraint that the cost of the purchases is no more than $1,400. Mathematically, we can write:

The optimal solution depends on the specific costs, savings, and preferences for energy efficiency.

To determine the optimal number of compact fluorescent light bulbs and square feet of insulation to purchase, we need additional information such as the cost and energy savings associated with each item.

Without specific data on the costs and savings, it is not possible to provide an exact answer. However, I can give you a general approach to consider:

1. Determine the cost and energy savings for each compact fluorescent light bulb (CFL) and square foot of insulation.

2. Compare the cost savings per year for CFL bulbs and insulation to evaluate which option provides more savings.

3. Start by allocating the budget to the option with the higher cost savings per dollar spent.

4. Calculate the number of CFL bulbs and square feet of insulation that can be purchased within the budget.

5. Consider any practical limitations or minimum requirements for installation (e.g., minimum insulation coverage, minimum number of bulbs needed).

6. Adjust the quantities of CFL bulbs and insulation based on the budget allocation and practical considerations.

Remember that the optimal solution depends on the specific costs, savings, and preferences for energy efficiency.

Learn more about optimal solutions

brainly.com/question/14914110

#SPJ11

If a swimmer swims 3 laps in a pool in 9 minutes, their average velocity can be zero because the swimmer returns to the starting point after each lap.

A lap in a pool consists of going across the pool and back again. Since the swimmer starts and ends at the same location for each lap, their displacement (change in position) is zero after completing each lap. Velocity is defined as the rate of change of displacement with respect to time.
To calculate the average velocity, we need to divide the total displacement by the total time. In this case, the total displacement is zero because the swimmer returns to the starting point after each lap, and the total time is 9 minutes. Therefore, the average velocity is:
Average velocity = (Total displacement) / (Total time) = (0) / (9 minutes) = 0
So, the swimmer's average velocity can be zero after swimming 3 laps in a pool in 9 minutes.

Learn more about the average velocity at https://brainly.com/question/862972

#SPJ11

If both parents are carriers of a recessive trait, the probability that all three children will have the normal phenotype is around 42.19%.

If both parents are carriers of a recessive trait, the probability that their children will have the normal phenotype can be determined using a Punnett square. Since both parents are carriers, their genotypes are heterozygous (Aa).

When we create a Punnett square, we see the following outcomes for their children's genotypes:
- AA (25%)
- Aa (50%)
- aa (25%)

To have a normal phenotype, the child must have either AA or Aa genotype. Therefore, the probability of one child having a normal phenotype is 75% (25% + 50%).

Now, to calculate the probability of all three children having a normal phenotype, we multiply the probabilities of each child:

0.75 × 0.75 × 0.75 = 0.421875, or approximately 42.19%.

So, the probability that all three children will have the normal phenotype is around 42.19%.

More on probability: https://brainly.com/question/13247902

#SPJ11

The probability that a customer waited in line for less than one minute to reach the window is [tex]\frac{1}{7}[/tex].

f(x) = [tex]\frac{1}{7}[/tex], 0 <= x <= 7

We want to find the probability that the waiting time is less than 1 minute, which is equivalent to finding the area under the probability density function from 0 to 1. This can be calculated using the following formula:

P(X < 1) = ∫[0,1] f(x) dx

Substituting the probability density function, we get:

P(X < 1) = ∫[0,1] [tex]\frac{1}{7}[/tex] dx

Integrating with respect to x, we get:

P(X < 1) = [[tex]\frac{x}{7}[/tex]][tex]0^1[/tex] = [tex]\frac{1}{7}[/tex]

Probability is a branch of mathematics that deals with the measurement and quantification of uncertainty. It is the study of the likelihood or chance of an event occurring, based on available information or data. Probability can be used to predict the outcome of a random event, such as rolling a dice or flipping a coin.

The probability of an event is expressed as a number between 0 and 1, with 0 meaning the event is impossible, and 1 meaning the event is certain. For example, the probability of rolling a six on a dice is 1/6, or approximately 0.17. Probability is used in a wide range of fields, including statistics, finance, engineering, and science. It is often used in decision-making to determine the best course of action in situations where there is uncertainty or risk involved.

To learn more about Probability visit here:

brainly.com/question/30034780

#SPJ4

An unambiguous grammar, also called an unambiguous context-free grammar (CFG), is a grammar that generates exactly one syntax tree for each string in the language it defines. The set of all regular expressions on σ = {a, b} can be generated by the following unambiguous grammar:

1. R -> R | RR | RE | R*
2. E -> a | b | ε
3. RR -> R R
4. RE -> R E
5. R* -> R *

Here's an explanation of the grammar:

1. R represents a regular expression. It can be a concatenation of regular expressions (RR), an elementary regular expression (E), or a regular expression followed by a kleene star (R*).
2. E represents an elementary regular expression, which can be either "a", "b", or the empty string "ε".
3. RR is a production rule that defines the concatenation of two regular expressions.
4. RE is a production rule that defines the concatenation of a regular expression with an elementary regular expression.
5. R* is a production rule that defines a regular expression followed by a kleene star.

This unambiguous grammar generates the set of all regular expressions on σ = {a, b} by allowing combinations of these production rules to form valid regular expressions. As the grammar is unambiguous, each string generated has a unique parse tree, ensuring clarity and correctness in the language defined by the grammar.

To learn more about unambiguous grammar : brainly.com/question/28188050

#SPJ11

The transformation x-Ax can be decomposed into a rotation and scaling if and only if A is symmetric.

If A is symmetric, then its eigenvalues will be real and its eigenvectors will be orthogonal. The scaling factor is determined by the magnitude of the eigenvalues, and the rotation angle is determined by the angle between the eigenvectors. However, without knowing the matrix A, I cannot determine the values for these.

Know more about symmetric here:

https://brainly.com/question/14466363

#SPJ11

Madison calculates the mean and standard deviation of chloride values from wells near the seashore. They have performed a statistical analysis.

In this scenario, Madison is examining chloride levels in wells located close to the seashore. To analyze the data, they use two common statistical measures: mean and standard deviation. The mean, or average, is calculated by summing up all the chloride values and dividing the total by the number of samples. This provides a central tendency for the data set, giving an overall understanding of chloride levels in the wells.

Standard deviation is another important measure that helps assess the dispersion or spread of the chloride values. A low standard deviation indicates that the values are closely clustered around the mean, while a high standard deviation suggests a wider spread or more variability in the data. By calculating both the mean and standard deviation, Madison can gain valuable insights into the chloride concentrations near the seashore and identify any trends, patterns, or potential issues that may require further investigation or action.

To know more about mean and standard deviation visit:

https://brainly.com/question/28108712

#SPJ11

The probability that X has a value smaller than 7.5 is approximately 0.1056.

To find the probability that X is smaller than 7.5, we have to standardize the variable using the z-score formula:

z = (x - μ) /σ

here,

x = value of probability,

μ = mean of the distribution, and

σ= standard deviation.

Now, we get,

z = (7.5 - 10) / 2 = -1.25

Now, we have to find the probability that Z (the standardized variable) is less than -1.25.

From a standard normal distribution table, we get that the probability of Z being less than -1.25 is 0.1056.

Therefore, the probability that X has a value smaller than 7.5 is approximately 0.1056.

To know more about the probability, click here.

https://brainly.com/question/30034780

https://brainly.com/question/11234923

The probability that X has a value smaller than 7.5 is approximately 0.1056. This means that in a large number of trials, we would expect X to be smaller than 7.5 about 10.56% of the time.

To answer this question, we need to use the properties of the normal distribution. We know that X is normally distributed with mean 10 and standard deviation 2. We want to find the probability that X has a value smaller than 7.5.
We can use the standard normal distribution to solve this problem. To do this, we first need to standardize the value of 7.5. We do this by subtracting the mean from 7.5 and dividing by the standard deviation:
Z = (7.5 - 10) / 2 = -1.25
Now we can use a standard normal distribution table or calculator to find the probability that Z is less than -1.25. This probability is approximately 0.1056.

Learn more about probability here

https://brainly.com/question/24756209

#SPJ11

Answer:

The period of function.........

Step-by-step explanation:

The distance between the repetition of any function is called the period of the function. For a trigonometric function, the length of one complete cycle is called a period.

The inverse of the function are shown below.

To find the inverse of function replace x and y and solve for x we get,

1. h(n)= 2/3n - 2

y= 2/3n-2

2/3n = y+2

n= 3/2(y+2)

n = 3/2y + 3

So, the inverse is y= 3/2n + 3.

2. g(x) = -x + 3

y = -x+ 3

-x= y- 3

x = 3-y

So, the inverse is y= 3 -x

3. g(n) = -4n+ 12

y= -4n+ 12

-4n = y- 12

n = 3 - y/4

So, the inverse is y = 3- n/4

4. g(x) = -3x+ 9/2

y = -3x + 9/2

2y - 9 = -3x

x = 3 - 2y/3

So, the inverse is y = 3 -2x /3

Learn more about Inverse of Function here:

https://brainly.com/question/2541698

#SPJ1

28

Step-by-step explanation:

To calculate the approximate area that will be painted on each lamp shade, we need to use the formula for finding the area of a circle: A = πr^2, where r is the radius of the circle. The diameter of the lamp shade is given as 6 inches, which means the radius is half of that, or 3 inches. Therefore, the area of the lamp shade that will be painted is approximately 3.14 x 3^2, which equals 28.26 square inches. So, the answer we select from the drop-down menu would be "28 square inches."

The 85% confidence interval for the probability of flipping a head with this coin is [0.438, 0.582], which corresponds to option a).

To find the confidence interval for the probability of flipping a head with this coin, we can use the formula:

CI = p ± z*sqrt((p(1-p))/n)

where p is the sample proportion (51/100), z* is the critical value from the standard normal distribution for an 85% confidence level (which is 1.44), and n is the sample size (100).

Plugging in these values, we get:

CI = 0.51 ± 1.44*sqrt((0.51(1-0.51))/100)

Simplifying, we get:

CI = 0.51 ± 0.104

Therefore, the 85% confidence interval for the probability of flipping a head with this coin is:

[0.406, 0.614]

This is not one of the answer choices given, so the correct answer is f) None of the above.
To find the 85% confidence interval for the probability of flipping a head with this coin, follow these steps:

1. Calculate the sample proportion (p-hat) by dividing the number of heads (51) by the total number of flips (100): p-hat = 51/100 = 0.51.

2. Determine the z-score for an 85% confidence interval. You can look this up in a standard normal distribution table, or use a calculator. The z-score is approximately 1.44.

3. Calculate the standard error (SE) using the formula: SE = sqrt((p-hat * (1-p-hat))/n), where n is the total number of flips. In this case, SE = sqrt((0.51 * 0.49)/100) ≈ 0.05.

4. Calculate the margin of error (ME) using the formula: ME = z-score * SE. In this case, ME = 1.44 * 0.05 = 0.072.

5. Determine the confidence interval by adding and subtracting the margin of error from the sample proportion: Lower limit = 0.51 - 0.072 = 0.438; Upper limit = 0.51 + 0.072 ≈ 0.582.

The 85% confidence interval for the probability of flipping a head with this coin is [0.438, 0.582], which corresponds to option a).

Learn more about confidence interval at: brainly.com/question/24131141

#SPJ11

To design a counter using five JK flip-flops, we can connect the output of the first flip-flop to the input of the second flip-flop, the output of the second flip-flop to the input of the third flip-flop, and so on. The output of the fifth flip-flop will be the final output of the counter. After two clock ticks, the value inside the counter will be 00110.

Assuming the value inside the counter is 00100, after two clock ticks, the value of the counter will be 00110. This is because the counter will count up by 1 on each clock tick. So on the first clock tick, the value will become 00101, and on the second clock tick, the value will become 00110.

1. Start with the initial value inside the counter: 00100
2. After the first clock tick, each flip-flop will toggle its state according to the JK input values. Assuming that all JK flip-flops have their inputs set to (J=1, K=1), which means they toggle their output on each clock tick:
  - First flip-flop (least significant bit): 0 -> 1
  - Second flip-flop: 1 -> 0
  - Third flip-flop: 0 -> 1 (as the second flip-flop changed from 1 to 0)
  - Fourth and fifth flip-flops remain the same, as there was no carry from the third flip-flop.
  Result after the first clock tick: 00101

3. Repeat the same process for the second clock tick:
  - First flip-flop: 1 -> 0
  - Second flip-flop: 0 -> 1
  - Third flip-flop remains the same, as there was no carry from the second flip-flop.
  - Fourth and fifth flip-flops also remain the same.
  Result after the second clock tick: 00110

After two clock ticks, the value inside the counter will be 00110.

Learn more about clock at: brainly.com/question/12528769

#SPJ11

In this example, the area of the sails of the scale model would be 1.025 SI units

To determine the area of the sails of the scale model, you'll first need to know the scale ratio between the real Lady Washington and the model.

A scale ratio is expressed as a fraction, such as 1:20, which means that 1 unit on the model represents 20 units on the real object.

Once you have the scale ratio, you'll need to apply the square of this ratio to the area of the sails of the real Lady Washington. For example, if the scale ratio is 1:20, then the ratio for the area calculation will be (1/20)^2, or 1/400.

Now, simply multiply the area of the real sails (410 SI units) by the square of the scale ratio. Using the 1:20 example, you'd calculate:

410 SI units * (1/400) = 1.025 SI units.

. Remember to replace the scale ratio with the actual ratio provided for your specific question.

To learn more about ratio click here

brainly.com/question/13419413

#SPJ11

The probability that when the die is rolled twice, the sum is 7 is 0.233.

The probability of rolling each number on the die can be expressed as follows:

P(1) = 1/6, P(2) = 2/6, P(3) = 3/6, P(4) = 4/6, P(5) = 5/6, P(6) = 6/6

To find the probability of rolling a sum of 7 when the die is rolled twice, we can use the concept of the convolution of probability distributions.

We can calculate the probability of obtaining each possible sum by multiplying the probabilities of the individual outcomes that add up to that sum, and then summing these products over all possible combinations of the outcomes. The possible sums that can be obtained when rolling the die twice are 2, 3, 4, ..., 11, 12.

For example, the probability of obtaining a sum of 7 is:

P(1 and 6) + P(2 and 5) + P(3 and 4) + P(4 and 3) + P(5 and 2) + P(6 and 1)

= (1/6)×(6/6) + (2/6)×(5/6) + (3/6)×(4/6) + (4/6)×(3/6) + (5/6)×(2/6) + (6/6)×(1/6)

= 0.233. Therefore, the probability of rolling a sum of 7 when the die is rolled twice is 0.233.

To know more about probability, refer here:

https://brainly.com/question/12629667#

#SPJ11

The smallest odd number that can be formed via the use of the numbers 1, 4, 5, and 8 if used once each will be 15.

To find the smallest  odd number via the use of the numbers 1, 4, 5, and 8 fair once, we have to make use of the digit 1 as the units digit, since it is the as it were odd digit accessible.

To make the complete number as little as seen, the another digit need to be the smallest even digit accessible, which is 4. At that point, the remaining two digits need to be put within the final two positions to create the smallest given number. Hence, we make use of 5 and 8 to create the two left over digits.

Learn more about odd number from

https://brainly.com/question/2263958

#SPJ1

See text below

Using the numbers 1,4,5 and 8 just once, write: smallest odd number

If all else remains constant and the values of two variables move in the same direction it indicates a positive slope relationship.

If all else remains constant and the values of two variables move in the same direction, it indicates a positive slope relationship. This means that as one variable increases, the other variable also increases. Conversely, if the values of two variables move in opposite directions, it indicates a negative slope relationship where as one variable increases, the other variable decreases. An inverse slope relationship is when two variables have opposite relationships and do not move in the same direction.

Know more about positive slope here:

https://brainly.com/question/31255862

#SPJ11

To determine the approximate rolling distance for a child on a bike weighing 110 lbs, we would need the regression line equation derived from a statistical analysis.

The regression line represents the relationship between the weight of the bike and the rolling distance. With the regression line equation, we can substitute the weight of 110 lbs into the equation to estimate the corresponding rolling distance. The regression analysis would have been performed using a dataset with various bike weights and their corresponding rolling distances. By analyzing the data, the regression line provides an approximation for predicting the rolling distance based on the weight of the bike.

To know more about regression line equation,  refer here:

https://brainly.com/question/32162660

#SPJ11

Sam could have kept the fire going for 24 hours with 36 logs, assuming that all the logs are the same.

We can assume that each log provides the same amount of heat to the fire, and therefore, the total amount of heat generated by 18 logs in 12 hours is the same as the total amount of heat generated by 36 logs in a certain number of hours.

Let's call the number of hours Sam could have kept the fire going with 36 logs "x".

So, we can set up a proportion:

18 logs / 12 hours = 36 logs / x hours

To solve for x, we can cross-multiply:

[tex]18 logs * x hours = 12 hours * 36 logs[/tex]

18x = 432

x = 24

Therefore, Sam could have kept the fire going for 24 hours with 36 logs, assuming that all the logs are the same.

Learn more about proportion problem

brainly.com/question/29505988

#SPJ11

The divorce rate for women who were married when they were 18 years or younger is higher than for those who marry over the age of 20 years. According to the latest research and studies conducted by various organizations, the divorce rate for women who marry at the age of 18 or younger is around 48%.

There are several reasons for the higher divorce rate among women who marry at a young age. One major factor is lack of maturity and life experience. Marriage requires a certain level of maturity and emotional stability to navigate the ups and downs that inevitably come with any long-term commitment. Many young women who marry before the age of 20 may not have fully developed these qualities, leading to conflict and dissatisfaction in the relationship.

Another factor is societal pressure and expectations. Women who marry young are often expected to take on traditional roles such as homemaker and mother, which can be overwhelming and stressful. This can lead to feelings of resentment and frustration, which can ultimately lead to divorce.

It's worth noting that there are exceptions to every rule, and there are certainly couples who marry young and have long, happy marriages. However, statistics show that the divorce rate is higher among those who marry at a young age.

for such more question on word problem

https://brainly.com/question/13818690

#SPJ11

When a sample is taken from a population, it is important to understand the characteristics of both the sample and the population. In this scenario, the sample size is 36, meaning that 36 individuals or data points were randomly selected from the larger population.

The population mean is 50, which tells us the average value of the population data. The standard deviation of the population is 5, which indicates the degree of variability in the data.

Using the information provided, we can calculate the standard error of the mean (SEM), which is the standard deviation of the sample mean. The formula for SEM is:

[tex]SEM = population standard deviation / square root of sample size[/tex]

SEM = 5 / square root of 36

SEM = 5 / 6

SEM = 0.83

Therefore, the standard error of the mean for this sample is 0.83. This means that if we were to take many samples of size 36 from this population, we would expect the mean of each sample to be within 0.83 units of the true population mean of 50.

It is important to note that while this sample may give us some insight into the characteristics of the larger population, it is not necessarily representative of the entire population. To increase the accuracy of our findings, we would need to take multiple random samples and calculate the means and standard errors of each sample.

Learn more about population here:

https://brainly.com/question/27991860

#SPJ11

The z-value of 1.96 is often used to establish control limits on a chart with a 95% confidence level.

This means that we can be 95% confident that the data falls within the control limits. The confidence level is calculated using the normal distribution curve and is equivalent to the area under the curve between the mean and the control limits. The z-value represents the number of standard deviations from the mean, and a z-value of 1.96 corresponds to the 97.5th percentile of the normal distribution curve.

In other words, there is a 2.5% chance that the data falls outside of the control limits. It is important to choose an appropriate confidence level based on the specific application and the consequences of making incorrect decisions based on the data.

To learn more about standard deviations click here

brainly.com/question/23907081

#SPJ11

A mixed Nash Equilibrium is a concept in game theory where each player in a 2-player game chooses a mixed strategy that maximizes their expected payoff, given the strategies of the other player.

In other words, it is a situation where neither player can improve their payoff by unilaterally changing their strategy.
An example of a 2-player game is the classic "Prisoner's Dilemma". In this game, two suspects are arrested for a crime and are being held in separate cells. The prosecutor offers each suspect a plea bargain: if one confesses and the other remains silent, the one who confesses will receive a reduced sentence while the other will receive a harsher sentence. If both confess, they will each receive a moderately harsh sentence, and if both remain silent, they will each receive a light sentence.
To exhibit a mixed Nash Equilibrium in this game, let's assume that both suspects choose between two strategies: "confess" or "remain silent". If one player confesses, the other player's best response is also to confess (since the harsher sentence for remaining silent is worse than the moderately harsh sentence for confessing). However, if both players confess, they both receive a moderately harsh sentence which is worse than if both remained silent. Therefore, neither player has a dominant strategy.
To find the mixed Nash Equilibrium, we can assign probabilities to each strategy for each player. Let's assume that each player chooses "confess" with probability p and "remain silent" with probability 1-p. If one player chooses "confess" with probability p, the other player's expected payoff is 2p (if they also confess) or 1-2p (if they remain silent). Therefore, the other player's best response is to choose "confess" with probability q=2p/(2p+1-2p) or "remain silent" with probability 1-q. Similarly, if the other player chooses "confess" with probability q, the first player's best response is to choose "confess" with probability p=2q/(2q+1-2q) or "remain silent" with probability 1-p.

Solving for the mixed Nash Equilibrium, we find that both players should choose "confess" with probability 1/3 and "remain silent" with probability 2/3. This means that in the long run, both suspects will confess approximately one-third of the time and remain silent two-thirds of the time, resulting in a moderately harsh sentence for both players.
A mixed Nash Equilibrium refers to a situation in a 2-player game where both players adopt a randomized strategy, and neither of them can improve their expected payoff by unilaterally changing their strategy. In other words, both players are indifferent among their strategies, and neither has an incentive to deviate from their current mixed strategy.
An example of a 2-player game that exhibits a mixed Nash Equilibrium is the classic game of Rock-Paper-Scissors. In this game, each player has three strategies: rock, paper, or scissors. The rules are that rock beats scissors, scissors beats paper, and paper beats rock.
To find the mixed Nash Equilibrium, both players should choose each strategy with equal probability (1/3 for rock, 1/3 for paper, and 1/3 for scissors). By doing this, each player's expected payoff is the same regardless of their opponent's strategy, as the chances of winning, losing, or tying are equal. Thus, there is no incentive for either player to deviate from this randomized strategy, and the mixed Nash Equilibrium is achieved.

Visit here to learn more about Nash Equilibrium:

brainly.com/question/27578385

#SPJ11

There are a few different statistical tests that could be used to compare the mean ages of cases and controls in a case-control study. One commonly used test is the t-test and  Mann-Whitney U test.

t-test compares the means of two groups and evaluates whether they are significantly different from one another. In this case, the two groups would be the cases and controls.

Know more about the Mann-Whitney U test.

https://brainly.com/question/31328451

#SPJ11

The answer is that an appropriate starting resistance for the first set of 12 repetitions for a novice exerciser who can perform a 1-RM bench press at 100 pounds would be around 50-60% of their 1-RM, which would be around 50-60 pounds.

It is important to understand the concept of "training load" when designing a resistance training program. The training load is the amount of weight or resistance that is lifted during an exercise, and it is typically expressed as a percentage of the 1-RM.

For a novice exerciser who is just starting out with resistance training, it is important to start with a relatively low training load to avoid injury and allow the body to adapt to the stress of the exercise. A good starting point is usually around 50-60% of the 1-RM, which is light enough to allow for proper form and technique while still providing enough resistance to stimulate muscle growth and strength gains.

In the case of a novice exerciser who can perform a 1-RM bench press at 100 pounds, a starting resistance of around 50-60 pounds for the first set of 12 repetitions would be appropriate. As the individual progresses and becomes stronger, the training load can be gradually increased over time to continue to challenge the muscles and stimulate further gains in strength and muscle size.

To know more about percentage visit:

brainly.com/question/28269290

#SPJ11

Absolute values of the integers can be added to find the sum of the integers.

Absolute value of a number is the distance of that number from the point of origin of a number line. Or in other words absolute value of a number is the magnitude of that number without concerning about the sign.

When doing the addition of two integers, we use absolute value.

If the two integers are having the same sign, then add the absolute value of the integers and then given the same sign as that of the given integers.

If the  two integers are having the opposite sign, then subtract the integer with less absolute value from the greater one. Give the sign as that of the greater one.

Hence the absolute values of the integers can be added to find the sum of the integers.

Learn more about Absolute Value here :

https://brainly.com/question/1301718

#SPJ1

Answer: 420,000

Step-by-step explanation: Brainliest pls:)