2. All of the following are examples of physical properties except:
A. tearing B. density C. melting point D. boiling point

Answer: B. Green

Explanation:

        Since the object absorbs all the other options listed here, it will reflect green light. This makes the object appear green to our eyes.

        Blue (A), indigo (C), and red (D) are listed in red, orange, yellow, blue, indigo, and violet. Green is not, so this is our answer.

     Fun fact:

An example of this is grass!

Answer:

green

Explanation:

Now

[tex]\\ \sf\rightarrowtail Power=\dfrac{Work\:done}{Time\:taken}[/tex]

[tex]\\ \sf\rightarrowtail Power=\dfrac{250}{1}[/tex]

[tex]\\ \sf\rightarrowtail Power=250W[/tex]

Answer:

when new information disproving the current theory becomes available.

Explanation:

hope this helps..

Answer:

when new evidence is discovered

Answer:

Explanation:

Use that:

[tex]F=-\vec{\nabla}U(x,y)=-\left(\hat{i} \frac{\partial U}{\partial x}+\hat{j}\frac{\partial U}{\partial y}\right)=-11.6x\hat{i}+10.8y^{2}\hat{j}[/tex]

Then use the 2nd Newton's Law of Motion:

[tex]\vec{a}=\frac{\vec{F}}{m}=\frac{-11.6x\hat{i}+10.8y^{2}\hat{j}}{0.04}=-290x\hat{i}+270y^{2}\hat{j}[/tex]

At x = 0.3 and y = 0.6, we can find the acceleration as:

[tex]\vec{a}=-87\hat{i}+97.2\hat{j}[/tex] (in SI unit)

Then the magnitude of the acceleration on that point is:

[tex]a=\sqrt{(-87)^{2}+(97.2)^{2}}\approx 130.44[/tex] (SI Unit)

The  force required to pull one of the microscope sliding at a constant speed of 0.28 m/s relative to the other is zero.

The force required to pull one of the microscope sliding at a constant speed of 0.28 m/s relative to the other is determined by applying Newton's second law of motion as shown below;

F = ma

where;

At a constant speed, the acceleration of the object will be zero.

F = m x 0

F = 0

Thus, the  force required to pull one of the microscope sliding at a constant speed of 0.28 m/s relative to the other is zero.

Learn more about constant speed here: https://brainly.com/question/2681210

The velocity of the body affter 2 seconds is 20 m/s

Acceleration, a is the change of velocity with time. this is represented mathematically as

a = ( v - u ) / t

where:

u = intial velocity

v = final velocity

t =  time

Given:

a = 10 m/s2

t = 2s

u = 0  ( from rest means initial velocity is zero )

therefore

a = v / t

v = a t

v = 10 * 2

v = 20 m/s

Read more on acceleration here: https://brainly.com/question/460763

Increasing the temperature causes an increase in the average kinetic energy of the particles of a material.

The average kinetic energy of particles is the energy possessed by particles due to their constant motion.

The constant motion of particles occurs due to the energy acquired by the particles, when the temperature of the particles increases, the average kinetic energy increases which in turn increases the speed of the particles.

Thus, we can conclude that, increasing the temperature causes an increase in the average kinetic energy of the particles of a material.

Learn more about average kinetic energy here: https://brainly.com/question/9078768

Answer:

the two types of materials interacting (described by the coefficient μk) and how hard these two surfaces are pushed together (the normal force)

hope this helps and is it needs more let me know

Hypotenuse be H

Apply Pythagorean theorem

[tex]\\ \sf\Rrightarrow H^2=P^2+B^2[/tex]

[tex]\\ \sf\Rrightarrow H^2=5^2+9^2[/tex]

[tex]\\ \sf\Rrightarrow H^2=25+81[/tex]

[tex]\\ \sf\Rrightarrow H^2=106[/tex]

[tex]\\ \sf\Rrightarrow H=\sqrt{106}cm[/tex]

Answer:

0

Explanation:

because no distance covered by body

Answer:

47

Explanation:

48km:1hr (10sec×60min=600hr)

¥ :600hr

1hr÷¥=1. 48×600÷1=2800

2800÷60=47

47 will be the acceleration

[tex]\text{Initial velocity,}~ u = 0 ~ ms^{-1}\\\\\text{Final velocity,}~ v = 48~kmh^{-1} = \dfrac{48\times 1000}{3600} ms^{-1} = 13.33 ms^{-1}\\ \\\text{Time,}~ t = 10~ sec\\\\\text{Acceleration,}~ a = \dfrac{v-u}{t} = \dfrac{13.33-0}{10} = \dfrac{13.33}{10} = 1.33 ~ ms^{-2}\\\\\text{Hence the acceleration of the car is}~ 1.33 ~ms^{-2}.[/tex]

Answer:

Adam Was the first person

Explanation:

Answer:

God is

Explanation:

Adam was the first human, Yes but God is the one who man Adam in his image and likeness, that is God looks just like the human

because we are made in God's image

Answer:

Lithium iodide

Explanation:

it's formula is LiI

Lithium iodide is a chemical compound composed of lithium and iodine, which when exposed to air turns yellow due to the oxidation of iodide to iodine. It has a chemical formula LiI.

The products, lithium iodide (LiI), sodium iodide (NaI), and cesium iodide (CsI) look like typical ionic compounds; they are all white crystalline solids

Answer:

289.1kg

Explanation:

because W=M*G, and M=W/G, so 2891N/10m/s²=289.1kg

(a) The velocity (in m/s) of the rock after 1 second is 11.28 m/s.

(b) The velocity of the rock after 2 seconds is 7.56 m/s.

(c) The time for the block to hit the surface is 4.03.

(d) The velocity of the block at the maximum height is 0.

The velocity of the rock is determined as shown below;

Height of the rock after 1 second; H(t) = 15(1) - 1.86(1)² = 13.14 m

v² = u² - 2gh

where;

v² = (15)² - 2(3.72)(13.14)

v² = 127.23

v = √127.23

v = 11.28 m/s

v = dh/dt

v = 15 - 3.72t

v(2) = 15 - 3.72(2)

v(2) = 7.56 m/s

dh/dt = 0

15 - 3.72t = 0

t = 4.03 s

v = u - gt

v = 15 - 3.72(4.03)

v = 0

Learn more about velocity at maximum height here: https://brainly.com/question/14638187

Answer:

Newton

Explanation:

The SI unit for weight is newton.

The flow of electrons causes charge dispersion. Due to the ability of conductors to transmit electrons from one particle to another, a charged item will always spread its charge until the overall repulsive interactions between surplus electrons are minimized.

Answer:

approximately 7 seconds

Explanation:

The given scenario is just an example of Projectile Motion.

In this question, we are given:

- Initial Velocity (u) = 40 m/s

- Angle of Elevation (θ) = 60 degrees

- Distance of Bird (s) = 145 meters        [Not used for the time of flight]

Time of Flight:

[tex]T = \frac{2uSin(\theta)}{g}[/tex]

we will use g = 9.8 m/s/s since we are not told otherwise.
[tex]T = \frac{2(40)Sin(60 degrees)}{9.8}[/tex]

[tex]T = \frac{40\sqrt{3}}{9.8}[/tex]

T = 4.081(√3) seconds
rounded to 7 seconds

Answer:

10 m/s

Explanation:

Given

Solving :

The volume of the material that must be used to make a star with the mass of the sun is 1.2×10⁵¹ m³.

Volume is the amount of space occupied by an object or a plane figure.

To calculate the volume of the material that must be used to make a star with the mass of the sun, we use the formula below.

Formula:

Where:

Make V the subject of the equation

From the question,

Given:

Substitute these values into equation 2

Hence, The volume of the material that must be used to make a star with the mass of the sun is 1.2×10⁵¹ m³.

Learn more about volume here: https://brainly.com/question/1972490

Answer:

A. boi-gas

Explanation:

This may help u

Answer:

Matter

Explanation:

A wave is a disturbance that transfers energy from one place to another without transferring matter. Waves transfer energy away from the source, or starting place, of the energy.

Answer:

energy

Explanation:

I took the test think of hydropower dams

Answer:

I think the object would accelerate.

Explanation:

When the unbalanced force hits the object, it transfers some of its force to the object, making it accelerate

Answer:

See Below

Explanation:

Mass of child = 21 kg

Mass of bicycle = 5.9 kg

Total mass = 22 + 5.9 = 27.9 kg

Velocity = 4.5 m/s

1) Total momentum of the child and the bike together

= Total mass * Velocity

= 27.9*4.5

= 125.55 kg m per second

2) Momentum of the child

= Mass of child*Velocity

= 21*5.9

= 123.9 kg m per second

3) Momentum of the bike

= Mass of bike*Velocity

= 5.9*4.5

= 26.55 kg m per second

According to Newton's third law

So

[tex]\\ \rm\dashrightarrow F_{A}=-F_A[/tex]

As car is pushed forward so the opposing force is less than 8000N

Answer:It is less than 8,000 N and greater than zero.

Explanation:

Answer:

The answer is B. Friction on the roller blades is greater on asphalt than on concrete.

Have an amazing day!!

Please rate and mark brainliest!!

Answer:

300N

Explanation:

in your drawing make sure to put 230n and 160n on the same side with arrows facing the same direction on the opposite side of the box add an arrow with 0n and an arrow to represent friction

The normal force of the ferris wheel on a 10kg toddler at the very bottom of the ferris wheel is 102.41 N.

The normal force of the ferris wheel on a 10kg toddler at the very bottom of the ferris wheel is calculated as follows;

Fn = Fc + mg

Fn = mω²r + mg

where;

Fn = 10(0.21²) 10  + 10(9.8)

Fn = 102.41 N

Thus, the normal force of the ferris wheel on a 10kg toddler at the very bottom of the ferris wheel is 102.41 N.

Learn more about force at the bottom of circular path here: https://brainly.com/question/14272266

Answer:

Oscillate

Explanation:

wave oscillates the particles of the medium around their equilibrium point.

The change in angular momentum of the pulley-block system is given as [tex]\omega = Rm_ogt_o[/tex]

Data;

This is the force that makes object rotate about an axis. The formula is given as the product between the radius about the axis and the force acting upon it.

The torque about point o is given as

[tex]\tau = R * m_og[/tex]

The change in angular momentum about point 'o' is the product between the torque and time.

[tex]\omega = \tau * t_o\\\omega = Rm_ogt_o[/tex]

The change in angular momentum of the pulley-block system is given as

[tex]\omega = Rm_ogt_o[/tex]

Learn more on torque here;

https://brainly.com/question/16928748