13- what is the limiting reactant and how much ammonia (nh3) is formed when 5.65 g of nitrogen reacts with 1.15 g of hydrogen? start by writing a balanced chemical equation for the reaction.

Answers

Answer 1

The balanced chemical equation for the reaction between nitrogen (N₂) and hydrogen (H₂) to form ammonia (NH₃) is:

[tex]N₂ + 3H₂ → 2NH₃[/tex]

To determine the limiting reactant, we need to compare the amount of each reactant with their respective stoichiometric coefficients in the balanced equation. The molar mass of nitrogen is approximately 28 g/mol, and the molar mass of hydrogen is approximately 2 g/mol. By converting the given masses to moles, we find that 5.65 g of nitrogen is approximately 0.202 moles and 1.15 g of hydrogen is approximately 0.575 moles.

Using the stoichiometry of the balanced equation, we find that for every 1 mole of nitrogen, 3 moles of hydrogen are required. Therefore, the 0.202 moles of nitrogen would require 0.606 moles of hydrogen.

Since we only have 0.575 moles of hydrogen, which is less than the required amount, hydrogen is the limiting reactant.

To calculate the amount of ammonia formed, we use the stoichiometric ratio between hydrogen and ammonia, which is 3:2. Thus, for every 3 moles of hydrogen, 2 moles of ammonia are produced.

Considering that we have 0.575 moles of hydrogen, we can calculate the amount of ammonia formed:

[tex](0.575 moles H₂) × (2 moles NH₃ / 3 moles H₂) ≈ 0.383 moles NH₃[/tex]

Therefore, approximately 0.383 moles of ammonia (NH₃) are formed when 5.65 g of nitrogen reacts with 1.15 g of hydrogen.

Learn more about hydrogen (H₂) here:

https://brainly.com/question/22876328

#SPJ11


Related Questions

he nitrogen atoms in n2 participate in multiple bonding, whereas those in hydrazine, n2h4, do not. part a complete lewis structures for both molecules. you may draw them in any order.a.) Draw Lewis structures for both molecules. b.) What is the hybridization of the nitrogen atoms in each molecule? c.) Which molecule has a stronger N-N bond?

Answers

N2: N≡N

N2H4: H2N-NH2b)

N2: sp hybridization for both nitrogen atoms

N2H4: sp3 hybridization for both nitrogen atomsc) N2 has a stronger N-N bond due to the triple bond between the nitrogen atoms, which involves a strong sigma and two pi bonds. In N2H4, the N-N bond is a single bond, which is weaker than the triple bond in N2.

In N2, both nitrogen atoms have a lone pair of electrons and three sigma bonds with the other nitrogen atom, forming an sp hybridization. In addition, there are two pi bonds that result from the overlap of p orbitals of the nitrogen atoms. This triple bond is very strong and requires a lot of energy to break.In contrast, in N2H4, each nitrogen atom has two sigma bonds and two lone pairs of electrons, leading to an sp3 hybridization. There are no pi bonds present, as there are no unpaired electrons in the p orbitals. The N-N bond in N2H4 is a single bond, which is weaker than the triple bond in N2.Overall, the bonding in both molecules is due to the sharing of electrons between the nitrogen atoms, but the number and type of bonds differ due to the different hybridization and electron arrangement of the nitrogen atoms.

Learn more about hybridization here:

https://brainly.com/question/30010106

#SPJ11

you need to make a solution containing 150 g of potassium chloride in 300 g of water what temperature is required

Answers

Since 267.86 g is less than the 300 g of water we have, we can dissolve 150 g of potassium chloride in 300 g of water at a temperature of 70°C.

The solubility of potassium chloride in water varies with temperature. To determine the temperature required to dissolve 150 g of potassium chloride in 300 g of water, we need to consult a solubility chart or table.

At 20°C, the solubility of potassium chloride in water is approximately 34 g/100 g of water. This means that 100 g of water at 20°C can dissolve 34 g of potassium chloride. To dissolve 150 g of potassium chloride, we would need:

150 g / 34 g/100 g = 441.18 g of water

Since we only have 300 g of water, we need to increase the temperature to dissolve all of the potassium chloride. At 70°C, the solubility of potassium chloride in water is approximately 56 g/100 g of water. This means that 100 g of water at 70°C can dissolve 56 g of potassium chloride. To dissolve 150 g of potassium chloride, we would need:

150 g / 56 g/100 g = 267.86 g of water

For more question on water click on

https://brainly.com/question/30610591

#SPJ11

Calculate the specific heat of a ceramic given that the input of 250.0 J to a 75.0 g sample causes the temperature to increase by 4.66 °C. a) 0.840 J/gc e) 10.7 Jg b) 1.39 J/g d) 0.715 J/gc e) 3.00 J/gc

Answers

The specific heat of a substance is the amount of energy required to raise the temperature of 1 gram of that substance by 1 degree Celsius. In this case, we have a ceramic sample with a mass of 75.0 grams and an input of 250.0 J of energy that causes a temperature increase of 4.66 °C.

To calculate the specific heat, we can use the formula:
q = m * c * ΔT
where q is the amount of heat energy, m is the mass of the substance, c is the specific heat, and ΔT is the change in temperature.
We know that q = 250.0 J, m = 75.0 g, and ΔT = 4.66 °C. So we can rearrange the formula to solve for c:
c = q / (m * ΔT)
Plugging in the values, we get:
c = 250.0 J / (75.0 g * 4.66 °C)
c = 0.840 J/g°C
Therefore, the specific heat of the ceramic sample is 0.840 J/g°C. Option (a) is the correct answer.

Learn more about specific heat of a substance here ;

https://brainly.com/question/21184946

#SPJ11

consider the stork reaction between acetophenone and ethyl propenoate. draw the structure of the product of the enamine formed between acetophenone and morpholine.

Answers

Considering the Stork reaction the product of the enamine formed between acetophenone and morpholine has the structure: C6H5-C(=N(-C4H8O))-CH3.

The enamine formed between acetophenone and morpholine would have the following structure: where Ph represents the phenyl group attached to the carbonyl carbon of acetophenone.

where Ph represents the phenyl group attached to the carbonyl carbon of acetophenone.

The step-by-step explanation is as follows:

1. Acetophenone is an aromatic ketone, with the structure C₆H₅-CO-CH₃.

2. Morpholine is a secondary amine, with the structure C₄H₈ON.

3. When acetophenone and morpholine react, they undergo an enamine formation reaction.

4. In this reaction, the ketone (C=O) group in acetophenone reacts with the nitrogen atom in morpholine.

5. The oxygen atom from the ketone group is replaced by the nitrogen atom from morpholine, creating a double bond between the carbon and nitrogen atoms (C=N).

6. The remaining part of morpholine is connected to the nitrogen atom, completing the enamine structure.

To know more about enamine here

https://brainly.com/question/31029898

#SPJ4

the solubility of la(io3)3 in a 0.10 m kio3 solution is 1.0 × 10–7 mol/l. calculate ksp for la(io3)3

Answers

The solubility product constant (Ksp) for La(IO₃)₃is 2.7 × 10⁻²⁹. To solve this problem, we need to use the solubility product constant (Ksp) equation, which is defined as the product of the concentrations of the ions in a saturated solution at equilibrium.

The equation for the dissolution of La(IO₃)₃ in water is: La(IO₃)₃ (s) ⇌ La³⁺ (aq) + 3 IO₃⁻ (aq)

The Ksp expression for this reaction is:

Ksp = [La³⁺][IO₃⁻]³

We are given that the solubility of La(IO₃)₃ in a 0.10 M KIO₃ solution is 1.0 × 10⁻⁷ mol/L. This means that at equilibrium, the concentration of La³⁺ ions in solution is equal to 1.0 × 10⁻⁷ mol/L, and the concentration of IO₃⁻ ions in solution is equal to 3 × 1.0 × 10⁻⁷ mol/L, since there are three IO₃⁻ ions for every La(IO₃)₃ molecule that dissolves.

Substituting these values into the Ksp expression, we get:

Ksp = (1.0 × 10⁻)(3 × 1.0 × 10⁻⁷)³
Ksp = 2.7 × 10⁻⁹

Therefore, the solubility product constant (Ksp) for La(IO₃)₃ is 2.7 × 10⁻²⁹.

To know more about solubility product constant, refer

https://brainly.com/question/1419865

#SPJ11

18th and 19th century research in gases led to the acceptance of what principle theory of science

Answers

The 18th and 19th century research in gases led to the acceptance of the kinetic-molecular theory of gases.

The kinetic-molecular theory of gases is a scientific principle that describes the behavior of gases at the molecular level. It was developed during the 18th and 19th centuries based on experimental observations and mathematical models. The theory states that:

Gases consist of tiny particles, such as atoms or molecules, that are in constant motion.

The particles are in constant collision with each other and with the walls of the container in which they are contained.

The average speed of the particles is directly proportional to the Kelvin temperature of the gas.

The pressure of a gas is directly proportional to the number of particles in the gas and to the average kinetic energy of the particles.

The kinetic-molecular theory of gases provided a more accurate and detailed explanation of the behavior of gases than the previous empirical models. It laid the foundation for the development of modern chemistry and physics and continues to be an important concept in these fields today.  

Learn more about kinetic-molecular visit: brainly.com/question/134712

#SPJ4

You are at the beach with a 2.00 liter balloon at sea level. the temperature outside is 28.0 °c. you take your balloon to the mountains where the pressure drops to 0.870 atm and the volume increases to 2.10 liters. what is the temperature outside in celsius?

Answers

The temperature outside at the mountains is approximately 25.3 °C. This can be calculated using the combined gas law, which relates the initial and final conditions of pressure, volume, and temperature.

The combined gas law is expressed as P1 * V1 / T1 = P2 * V2 / T2, where P1 and P2 are the initial and final pressures, V1 and V2 are the initial and final volumes, and T1 and T2 are the initial and final temperatures. We are given P1 = 1 atm, V1 = 2.00 L, P2 = 0.870 atm, V2 = 2.10 L, and T1 = 28.0 °C.

First, we convert the temperatures to Kelvin by adding 273.15 to each value. Therefore, T1 = 301.15 K. Rearranging the equation to solve for T2, we have T2 = (P2 * V2 * T1) / (P1 * V1). Substituting the given values, we find T2 = (0.870 atm * 2.10 L * 301.15 K) / (1 atm * 2.00 L), which simplifies to approximately 298.45 K.

Converting the result back to Celsius by subtracting 273.15, we find that the temperature outside at the mountains is approximately 25.3 °C.

To learn more about combined gas law click here, brainly.com/question/30458409

#SPJ11

The standard heat of vaporization of acetone is 31.3 kj/mol and its normal boiling point is 56°c. calculate the change in entropy when 2.50 mol of acetone are vaporized.

Answers

Total ΔS = (2.50 mol) * (95.1 J/mol·K) ≈ 237.75 J/K

The change in entropy when 2.50 mol of acetone are vaporized, we need to use the equation:
ΔS = qrev/T
qrev = ΔHvap * n
where qrev is the reversible heat transfer, ΔHvap is the heat of vaporization, and n is the number of moles of acetone.
Plugging in the values given in the problem, we get:
qrev = 31.3 kJ/mol * 2.50 mol
qrev = 78.25 kJ
Now we can use this value to calculate the change in entropy:
ΔS = qrev/T
To find the temperature, we need to convert the boiling point of acetone from Celsius to Kelvin:
T = (56 + 273.15) K
T = 329.15 K
Now we can plug in the values and solve for ΔS:
ΔS = 78.25 kJ / 329.15 K
ΔS = 0.238 kJ/K
The change in entropy when 2.50 mol of acetone are vaporized is 0.238 kJ/K.
The change in entropy (ΔS) when 2.50 mol of acetone are vaporized, we can use the equation:
ΔS = (ΔH_vap) / T
The ΔH_vap is the heat of vaporization (31.3 kJ/mol) and T is the boiling point in Kelvin (56°C + 273.15 = 329.15 K).
Convert the heat of vaporization to J/mol:
31.3 kJ/mol * 1000 J/kJ = 31300 J/mol
ΔS = (31300 J/mol) / (329.15 K) ≈ 95.1 J/mol·K

To know more about entropy visit:-

https://brainly.com/question/13135498

#SPJ11

The enthalpy of solution of calcium chloride is negative_ That means that:a. when calcium chloride is dissolved in water; the temperature of the surroundings increases_b. It requires lots of energy to pull the calcium ions apart from the chloride ionsc. Calcium chloride is insoluble in waterd. when calcium chloride is dissolved in water;_ the temperature of the surroundings decreasese. Calcium chloride is very unreactive

Answers

The enthalpy of solution of calcium chloride is negative, which means that when calcium chloride is dissolved in water, the temperature of the surroundings decreases. This is because the process of dissolving calcium chloride in water releases energy in the form of heat.

In other words, the enthalpy change is exothermic, which means that energy is being released.
Contrary to option b, it does not require a lot of energy to pull the calcium ions apart from the chloride ions. In fact, calcium chloride is highly soluble in water due to the strong attraction between the ions and the polar water molecules.
Option c is also incorrect as calcium chloride is highly soluble in water. It can dissolve in water to form a clear, colorless solution.
Finally, option e is not related to the enthalpy of solution of calcium chloride. The negative enthalpy change simply indicates that energy is released when calcium chloride is dissolved in water.
In conclusion, the correct answer is option d - when calcium chloride is dissolved in water, the temperature of the surroundings decreases due to the release of energy in the form of heat.
The enthalpy of solution of calcium chloride is negative, which means that when calcium chloride is dissolved in water, the process is exothermic. Consequently, option a is correct: the temperature of the surroundings increases as heat is released when calcium chloride dissolves in water. This occurs because the energy released from the interactions between calcium ions, chloride ions, and water molecules outweighs the energy required to separate the ions.

To know more about exothermic visit:

https://brainly.com/question/31724481

#SPJ11

if 3.41 g of nitrogen react with 2.79 g of hydrogen to produce ammonia, what is the limiting reactant and what mass of ammonia is produced?if 3.41 g of nitrogen react with 2.79 g of hydrogen to produce ammonia?

Answers

Explanation:

N2 + 3H2 —————-> 2NH3

Mass of nitrogen = 3.41 g

Mass of hydrogen = 2.79 g

Change it into moles

No of moles (N2) = (mass in grams)/molar mass

No of moles (N2) = 3.14/14 = 0.22 mol

No of moles (H2) = 2.79/2 = 1.4 mol

Than we find which moles produce less moles of NH3

According to equation

1 mole nitrogen produce NH3 = 2 mol

0.22 mole nitrogen produce NH3 = 2 x 0.22 = 0.44

3 mole hydrogen produce NH3 = 2 mol

1 mole hydrogen produce NH3 = 2/3 = 0.67 mol

1.4 mole hydrogen produce NH3 = 0.67x 1.4= 0.93 mol

So

nitrogen produce NH3 = 0.44 mol

Hydrogen produce NH3 = 0.93 mol

So nitrogen produce less moles of NH3 so it is limiting reactant.

In that reaction 0.44 mol ammonia is produced

a barrier with yellow and purple markings indicates a _____. group of answer choices fire hazard fall hazard radiation hazard confined space hazard

Answers

In safety and hazard communication, specific colors and markings are used to convey different types of hazards.  A barrier with yellow and purple markings indicates a radiation hazard.

In safety and hazard communication, specific colors and markings are used to convey different types of hazards. One such color combination is yellow and purple, which is commonly associated with a radiation hazard.

Radiation hazards refer to situations where there is potential exposure to ionizing radiation, such as alpha particles, beta particles, gamma rays, or X-rays. These types of radiation can have harmful effects on living organisms and require proper precautions to minimize the risks.

The use of a barrier with yellow and purple markings serves as a visual warning to indicate the presence of a radiation hazard. It alerts individuals to exercise caution, restrict access to the area, and take necessary safety measures to prevent unnecessary exposure. This may include the use of personal protective equipment (PPE), adherence to safety protocols, and following established procedures for handling and controlling radiation source.

Learn more about beta particles here:

https://brainly.com/question/24304097

#SPJ11

identify those elements that can be isolated by electrolysis of their aqueous salts. (select all that apply.) barium chlorine lithium bromine

Answers

In the list of elements (barium, chlorine, lithium, and bromine), the ones that can be isolated through electrolysis are chlorine, lithium, and bromine.

Electrolysis is a process used to isolate elements from their aqueous salts by passing an electric current through a solution containing ions.

Chlorine and bromine are both halogens (Group 17 elements), which can be isolated during the electrolysis of their respective salts, such as sodium chloride (NaCl) and sodium bromide (NaBr). In these cases, the halogen ions are reduced at the anode, releasing chlorine or bromine gas.

Lithium, an alkali metal (Group 1 element), can also be isolated via electrolysis. During the process, lithium ions in a lithium salt solution (e.g., lithium chloride, LiCl) are reduced at the cathode, forming solid lithium.

Barium, an alkaline earth metal (Group 2 element), is not efficiently isolated using electrolysis of its aqueous salts due to its high reactivity with water and the solubility of its hydroxide. Instead, other methods, such as reduction of barium oxide with aluminum, are used to isolate barium.

In summary, chlorine, lithium, and bromine can be isolated through electrolysis of their aqueous salts, while barium cannot be efficiently isolated using this method.

Learn more about Electrolysis here: https://brainly.com/question/28955893

#SPJ11

A sample of helium is initially at 605 torr in
a volume of 2.85 L.
At 24.7 °C you found the density of He to
be 0.130 g/L and the density of Ar to be
1.30 g/L even though both samples had
the same number of moles. Which one of
the following best explains why the
densities are different?

Answers

The reason why the densities of helium (He) and argon (Ar) are different despite having the same number of moles is due to their difference in molar mass (molecular weight).

The density of a gas is dependent on its molecular weight.  Even though both samples have the same number of moles, the molecular weight of helium (4 g/mol) is much smaller than that of argon (40 g/mol).

Therefore, the helium sample will have a lower density than the argon sample, even if they are at the same pressure and temperature.

Since density is mass divided by volume, the difference in molar mass results in different densities for the two gases, with helium being less dense than argon.

To know more about density, click below.

https://brainly.com/question/17990467

#SPJ11

Decide whether a chemical reaction happens in either of the following situations. If a reaction does happen, write the chemical equation for it. Be sure your chemical equation is balanced and has physical state symbols.
A strip of solid lead metal is put into a beaker of 0.065M Cu(NO3)2 solution.
A strip of solid copper metal is put into a beaker of 0.096M Pb(NO3)2solution.

Answers

The chemical equation is as :

Fe(s)  +  Pb(NO₃)₂(aq)  ---->  Fe(NO₃)₂(aq)  +   Pb(s)

The Single displacement reaction is the reaction in which the reaction in that the more reactive metal will be displaces aa the less reactive metal in its chemical reaction.

The general equation is :

AB  +  C --->  CB  +  A

The C is the more reactive element than the element A.

The reactivity of the metals is explained by the series that is known as the reactivity series.

1. When the solid lead metal will be put in the beaker of the 0.065 M  solution.

Pb(s)  +   Fe(NO₃)₂(aq)  --->  no reaction

2. When the solid iron metal will be put in the beaker of the 0.096 M  solution.

Fe(s)  +  Pb(NO₃)₂(aq)  ---->  Fe(NO₃)₂(aq)  +   Pb(s)

To learn more about displacement reaction here :

https://brainly.com/question/29307794

#SPJ4

calculate the ph of a solution that is 0.61 m hf and 1.00 m kf. ka = 7.2×10-4

Answers

pH = 3.15 to calculate the pH of the solution, we need to first calculate the concentration of H+ ions. We can do this by using the Ka expression for HF:

[tex]Ka = [H+][F-]/[HF][/tex]

We can assume that [F-] is equal to the initial concentration of KF, which is 1.00 M. Let's represent the concentration of H+ ions as x:

[tex]Ka = (x)(1.00)/(0.61 - x)[/tex]

Simplifying and solving for x:

[tex]x = 1.4 x 10^-3 M[/tex]

Now that we have the concentration of H+ ions, we can use the pH equation:

[tex]pH = -log[H+] pH = -log(1.4 x 10^-3) pH = 3.15[/tex]

Therefore, the pH of the solution is 3.15.

The problem involves calculating the pH of a solution containing a weak acid (HF) and its conjugate base (F-) as well as a salt (KF). To calculate the pH, we first use the Ka expression for the weak acid to determine the concentration of H+ ions in the solution. We then use the pH equation to calculate the pH from the H+ ion concentration. In this problem, we assume that the concentration of F- ions is equal to the initial concentration of KF since KF dissociates completely in water.

Learn more about acid here:

https://brainly.com/question/14072179

#SPJ11

Nitrogen is a commonly used gas. Which of the following are properties of nitrogen?
choices:
low bptability to support combustionability to change color with temperaturehigh solubility in waterlack of chemical reactivity

Answers

Among the given options , 1. Low boiling point, 2. Ability to support combustion, 3. Ability to change colour with temperature,4. High solubility in water, 5. Lack of chemical reactivity, the properties of nitrogen which is a commonly used gas are: 1. Low boiling point: Nitrogen has a low boiling point of -195.8°C (-320.4°F) , 5. Lack of chemical reactivity: Nitrogen is a relatively inert gas and does not easily react with other substances.

The properties of nitrogen include a low boiling point, the inability to support combustion, a lack of chemical reactivity, and a colourless and odourless gas. It has low solubility in water and does not change colour with temperature.

Therefore, the correct answer is low boiling point and lack of chemical reactivity.

Learn more about nitrogen : https://brainly.com/question/11483365

#SPJ11

What is the standard enthalpy of the reaction CO+H2O --> CO2+H2?

Answers

The standard enthalpy of the reaction CO + H2O → CO2 + H2 is -679.3 kJ/mol. The standard enthalpy of the reaction CO + H2O → CO2 + H2 can be determined by calculating the difference in the standard enthalpies of formation between the products and the reactants.

The enthalpy change for this reaction is -41.2 kJ/mol.

The standard enthalpy of a reaction is the difference in the standard enthalpies of formation between the products and the reactants. The standard enthalpy of formation is the enthalpy change when one mole of a compound is formed from its constituent elements in their standard states.

To determine the standard enthalpy of the reaction CO + H2O → CO2 + H2, we need to subtract the sum of the standard enthalpies of the formation of the reactants from the sum of the standard enthalpies of the formation of the products.

The standard enthalpy of the formation of CO2 is -393.5 kJ/mol, and the standard enthalpy of the formation of H2O is -285.8 kJ/mol. The standard enthalpies of the formation of CO and H2 are zero since they are elements in their standard states.

Using these values, we can calculate the standard enthalpy of the reaction:

Standard enthalpy of reaction = Σ(standard enthalpies of formation of products) - Σ(standard enthalpies of formation of reactants)

Standard enthalpy of reaction = [(-393.5 kJ/mol) + (-285.8 kJ/mol)] - [0 + 0]

Standard enthalpy of reaction = -679.3 kJ/mol

To learn more about standard enthalpy, refer:-

https://brainly.com/question/28303513

#SPJ11

what molality of a nonelectrolyte solute is needed to lower the melting point of camphor by 1 c (of=39.7 c/m)

Answers

The molality of the solute needed to lower the melting point of camphor by 1 °C is m = 1 °C / 39.7 °C/m, which is approximately 0.025 mol/kg.

To calculate the molality needed to lower the melting point of camphor by 1°C, we can use the formula:

ΔT = Kf * molality

Here, ΔT is the change in melting point (1°C), Kf is the cryoscopic constant for camphor (39.7 °C/m), and molality is the molality of the nonelectrolyte solute.

Rearranging the formula to find molality:

molality = ΔT / Kf

Substitute the known values:

molality = 1°C / 39.7 °C/m molality ≈ 0.0252 mol/kg

Therefore, a molality of approximately 0.0252 mol/kg of a nonelectrolyte solute is needed to lower the melting point of camphor by 1°C.

Learn more about molality at https://brainly.com/question/10949809

#SPJ11

A given volume of methane diffuses in 20 seconds how long will it take the same volume of sulphur(IV) oxide to diffuse under the same condition

Answers

The rate of diffusion of a gas is inversely proportional to the molecular weight of the gas.r ∝ 1/√Molecular weight. On comparing the molecular weight of methane (CH4) and sulfur (IV) oxide (SO2) we have The molecular weight of methane (CH4) = 12 + (4 × 1) = 16, Molecular weight of sulfur (IV) oxide (SO2) = 32 + (2 × 16) = 64.

Since the molecular weight of SO2 is greater than that of CH4, then its rate of diffusion will be slower than that of CH4.

To determine how long SO2 will take to diffuse under the same condition, we can make use of Graham’s Law of diffusion.r1/r2 = sqrt(M2/M1), Where: r1 is the rate of diffusion of the first gas (CH4)r2 is the rate of diffusion of the second gas (SO2), M1 is the molecular weight of the first gas (CH4)M2 is the molecular weight of the second gas (SO2).

Hence:r1/r2 = sqrt(M2/M1)r1 = rate of diffusion of methane = 1 (given), r2 = rate of diffusion of sulfur (IV) oxide, M1 = molecular weight of methane = 16, M2 = molecular weight of sulfur (IV) oxide = 64, r2 = r1 * sqrt(M1/M2)r2 = 1 * sqrt(16/64) = 0.5.

Therefore, it will take the same volume of sulfur (IV) oxide (SO2) twice the time it takes for methane (CH4) to diffuse under the same conditions.

Learn more about Graham’s Law of diffusion here ;

https://brainly.com/question/12415336

#SPJ11

The enthalpy of fusion, or heat of fusion (AHfusion), of water is positive and corresponds to which physical change? H2O(l)-H2O(s) 1.10 H20(g)--H2O(s) H20(s) H2O(g) H2O(s)-H200)

Answers

The value of AHfusion for water is approximately 6.01 kJ/mol, which is relatively high compared to other substances due to the strong hydrogen bonding between water molecules.

The enthalpy of fusion, or AHfusion, refers to the energy required to melt or freeze a substance at its melting point. In the case of water, the AHfusion value is positive, indicating that it requires energy input to melt ice and convert it to liquid water.

Therefore, the physical change that corresponds to the AHfusion of water is H2O(s) - H2O(l). This means that when solid ice (H2O(s)) is heated to its melting point, energy is required to break the hydrogen bonds between water molecules and convert them into liquid water (H2O(l)). The value of AHfusion for water is approximately 6.01 kJ/mol, which is relatively high compared to other substances due to the strong hydrogen bonding between water molecules. This property of water plays an important role in its unique behavior and properties, such as its high specific heat capacity and thermal stability.

To learn more about hydrogen bonding visit:

brainly.com/question/30885458

#SPJ11

what type of alcohol results when a grignard reagent reacts with a ketone (followed by h2o)? primary secondary tertiary

Answers

Tertiary type of alcohol results when a grignard reagent reacts with a ketone.

Option C is correct.

What are Grignard Reagents?

An organomagnesium compound known as a Grignard reagent has the chemical formula "R-Mg-X," where R denotes an alkyl or aryl group and X denotes a halogen. They are typically made by reacting magnesium with an aryl or alkyl halide.

How does Grignard reagent function?

A halogen compound's number of halogen atoms can be determined using Grignard reagents. Grignard degradation is utilized in numerous cross-coupling reactions and the chemical analysis of specific triacylglycerols for the formation of numerous carbon-carbon and carbon-heteroatom bonds.

Incomplete question:

what type of alcohol results when a grignard reagent reacts with a ketone (followed by h2o)?

A. primary

B.  secondary

C. tertiary

Learn more about Grignard reagent:

brainly.com/question/16040954

#SPJ4

How many coulombs of charge are required to cause reduction of 0.20 mole of Cr3+ to Cr? A) 0.60 C B) 3.0 C C) 2.9

Answers

The correct number of coulombs of charge required to cause a reduction of 0.20 mole of Cr3+ to Cr is 0.60 C. The correct option is (a).

To determine how many coulombs of charge are required to cause a reduction of 0.20 mole of Cr3+ to Cr, we need to use Faraday's constant, which is the amount of charge carried by one mole of electrons. Faraday's constant is equal to 96,485 coulombs per mole of electrons.

The balanced equation for the reduction of Cr3+ to Cr is:

Cr3+ + 3e- → Cr

From the equation, we can see that 3 moles of electrons are required to reduce 1 mole of Cr3+ to Cr. Therefore, to reduce 0.20 mole of Cr3+ to Cr, we need:

0.20 mol Cr3+ × (3 mol e- / 1 mol Cr3+) = 0.60 mol e-

Now, we can use Faraday's constant to convert the number of moles of electrons to coulombs of charge:

0.60 mol e- × (96,485 C / 1 mol e-) = 57,891 C

Therefore, the correct option is (a).

For more such questions on coulombs:

https://brainly.com/question/12498766

#SPJ11

The correct number of coulombs of charge required to cause a reduction of 0.20 mole of Cr3+ to Cr is 0.60 C. The correct option is (a).

To determine how many coulombs of charge are required to cause a reduction of 0.20 mole of Cr3+ to Cr, we need to use Faraday's constant, which is the amount of charge carried by one mole of electrons. Faraday's constant is equal to 96,485 coulombs per mole of electrons. 

The balanced equation for the reduction of Cr3+ to Cr is:Cr3+ + 3e- → CrFrom the equation, we can see that 3 moles of electrons are required to reduce 1 mole of Cr3+ to Cr. Therefore, to reduce 0.20 mole of Cr3+ to Cr, we need:0.20 mol Cr3+ × (3 mol e- / 1 mol Cr3+) = 0.60 mol e-Now, we can use Faraday's constant to convert the number of moles of electrons to coulombs of charge:0.60 mol e- × (96,485 C / 1 mol e-) = 57,891 C Therefore, the correct option is (a).

Learn more about coulombs here :

brainly.com/question/12498766#SPJ11

#SPJ11

What is the boiling point, in °C, of
a 1.3 m solution of C6H14 in
benzene?

Answers

The boiling point of the 1.3 m solution of C₆H₁₄ in benzene is  83.5 °C.

What is the boiling point, of a 1.3 m solution of C6H14 in benzene?

The boiling point of the 1.3 m (molality) solution of C₆H₁₄ in benzene is determined using the equation:

ΔT = Kb * m

where

ΔT is the boiling point elevation,Kb is the molal boiling point elevation constant of the solvent (benzene), andm is the molality of the solution.

Given data:

Kb (benzene) = 2.65 °C/m

m = 1.3 m

Substituting the values into the equation:

ΔT = 2.65 °C/m * 1.3 m

ΔT = 3.445 °C

Boiling point of the solution = Boiling point of benzene + ΔT

Boiling point of the solution = 80.10 °C + 3.445 °C

Boiling point of the solution  = 83.545 °C

Learn more about boiling point at: https://brainly.com/question/1530966

#SPJ1

Calculate the energy required to heat 1.40kg of iron from −5.5°C to 15.7°C. Assume the specific heat capacity of iron under these conditions is 0.449J·g−1K−1. Be sure your answer has the correct number of significant digits

Answers

The energy required to heat 1.40 kg of iron from -5.5°C to 15.7°C is approximately 1.34 x 10^4 J.

The formula to calculate the energy (Q) required to heat a substance is given by:

Q = mcΔT

where Q is the energy, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature.

Given:

Mass of iron (m) = 1.40 kg

Specific heat capacity of iron (c) = 0.449 J·g^−1·K^−1

Change in temperature (ΔT) = 15.7°C - (-5.5°C) = 21.2°C

To use the specific heat capacity in joules per kilogram per degree Celsius, we need to convert the mass from kilograms to grams.

1 kg = 1000 g

Therefore, the mass of iron (m) in grams is 1.40 kg * 1000 g/kg = 1400 g.

Substituting the values into the formula:

Q = (1400 g) * (0.449 J·g^−1·K^−1) * (21.2°C)

Calculating the result:

Q = 13369.536 J

Rounded to the correct number of significant digits:

Q = 1.34 x 10^4 J

Therefore, the energy required to heat 1.40 kg of iron from -5.5°C to 15.7°C is approximately 1.34 x 10^4 J.

Learn more about specific heat capacity here:

https://brainly.com/question/28302909

#SPJ11

Most of the carbon in amino acid biosynthesis comes from A) citric acid cycle intermediates B) citric acid cycle intermediates and glycolysis products C) glycolysis products. D) glycolysis intermediates and products

Answers

Most of the carbon in amino acid biosynthesis comes (B) from citric acid cycle intermediates and glycolysis products.

The carbon in amino acid comes from a variety of sources, but the primary ones are intermediates from the citric acid cycle and glycolysis. The citric acid cycle generates the reducing power and intermediates that are required for amino acid biosynthesis, while glycolysis provides the precursors for amino acid biosynthesis. Specifically, glycolysis provides the three-carbon precursor molecule pyruvate, which can be converted into alanine and several other amino acids. The carbon atoms from citric acid cycle intermediates and glycolysis products are ultimately used to build the amino acids that are used to make proteins, which are components of all living cells. Overall, both the citric acid cycle and glycolysis play critical roles in providing the carbon and energy necessary for amino acid biosynthesis.

To know more about carbon visit:

https://brainly.com/question/22530423

#SPJ11

TRUE/FALSE.Methane absorbs red light readily, so we would expect a planet with a mostly methane atmosphere to appear blue.

Answers

Methane absorbs red light readily, so we would expect a planet with a mostly methane atmosphere to appear blue. The statement is false.

Methane absorbs red light, but it does not readily absorb it. Methane primarily absorbs light in the infrared range, particularly wavelengths longer than red light. This absorption gives rise to the characteristic reddish color observed in some gas giants, such as Jupiter. In the case of a planet with a mostly methane atmosphere, the methane would scatter and absorb light differently depending on the wavelengths involved. While methane absorbs longer-wavelength light, it scatters shorter-wavelength light more effectively. As a result, the scattered light may have a bluish hue.

Therefore, a planet with a predominantly methane atmosphere would not appear blue as a direct consequence of methane’s absorption of red light. The actual appearance of such a planet would depend on various factors, including the specific composition of the atmosphere, the presence of other molecules or aerosols, and the scattering and absorption properties of those substances across the entire visible spectrum.

Learn more about Methane here:

https://brainly.com/question/12645626

#SPJ11

Identify the electron configuration for each of the following ions: (a) A carbon atom with a negative charge (b) A carbon atom with a positive charge (c) A nitrogen atom with a positive charge (d) An oxygen atom with a negative charge

Answers

Here are the electron configurations for each of the ions that are mentioned:

(a) A carbon atom with a negative charge:
To determine the electron configuration for a negative ion, we add electrons to the neutral atom's electron configuration. For carbon, the neutral atom has 6 electrons. Adding one electron gives us:
1s² 2s² 2p³
(b) A carbon atom with a positive charge:
To determine the electron configuration for a positive ion, we remove electrons from the neutral atom's electron configuration. For carbon, the neutral atom has 6 electrons. Removing one electron gives us:
1s² 2s² 2p²
(c) A nitrogen atom with a positive charge:
To determine the electron configuration for a positive ion, we remove electrons from the neutral atom's electron configuration. For nitrogen, the neutral atom has 7 electrons. Removing one electron gives us:
1s² 2s² 2p³
(d) An oxygen atom with a negative charge:
To determine the electron configuration for a negative ion, we add electrons to the neutral atom's electron configuration. For oxygen, the neutral atom has 8 electrons. Adding one electron gives us:
1s² 2s² 2p⁴.

To know more about electronic configuration visit:

https://brainly.com/question/31812229

#SPJ11

calculate the mass percent of a sucrose solution that is made by mixing 4.84 grams of sucrose into 14.7 grams of water. report your answer to one place past the decimal.

Answers

The correct answer is  24.8%.

To calculate the mass percent of sucrose, we need to follow the given steps.

First, we need to calculate the total mass of the solution:

Total mass = mass of sucrose + mass of water

Total mass = 4.84 g + 14.7 g

Total mass = 19.54 g

Next, we need to calculate the mass of the sucrose in the solution:

Mass of sucrose in solution = 4.84 g

Now we can calculate the mass percent of sucrose in the solution:

Mass percent = (mass of sucrose in solution / total mass of solution) x 100%

Mass percent = (4.84 g / 19.54 g) x 100%

Mass percent = 24.8%

Therefore, the mass percent of the sucrose solution is 24.8%.

To know more about the mass percent of sucrose, refer here

https://brainly.com/question/30692810#

#SPJ11

Consider the following reaction:
CO(g)+2H2(g)⇌CH3OH(g)
Kp=2.26×104 at 25 ∘C. Calculate ΔGrxn for the reaction at 25 ∘C under each of the following conditions.
Part A:
standard conditions
Part B:
at equilibrium
Part C:
PCH3OH= 1.1 atm ;
PCO=PH2= 1.3×10−2 atm
Express your answer using two significant figures.

Answers

ΔGrxn=-6.2 kJ/mol under standard conditions, 0 kJ/mol at equilibrium, and -7.7 kJ/mol at given pressures.


ΔGrxn is the change in Gibbs free energy for the reaction CO(g)+2H2(g)⇌CH3OH(g), and it can be calculated using the equation ΔGrxn=ΔHrxn-TΔSrxn, where ΔHrxn is the change in enthalpy and ΔSrxn is the change in entropy.

Under standard conditions, ΔGrxn is -6.2 kJ/mol.

At equilibrium, the reaction has reached a state of minimum Gibbs free energy, so ΔGrxn is 0 kJ/mol.

Under the given pressures of PCH3OH=1.1 atm and PCO=PH2=1.3×10−2 atm, ΔGrxn is -7.7 kJ/mol.

These calculations show the thermodynamic feasibility and spontaneity of the reaction under different conditions

For more such questions on equilibrium, click on:

https://brainly.com/question/13414142

#SPJ11.

Equilibrium is a state where the forward and reverse reactions of a chemical equation are occurring at equal rates. In other words, the concentrations of reactants and products are constant over time. The value of Kp, the equilibrium constant, helps determine the position of the equilibrium and the relative amounts of reactants and products at equilibrium.

To calculate ΔGrxn for the given reaction at 25 ∘C under different conditions, we can use the equation ΔGrxn = -RTln(Kp), where R is the gas constant and T is the temperature in Kelvin.
Part A:
Under standard conditions, the pressure is 1 atm and the concentration of all species is 1 M. Therefore, we can use the standard value of Kp = 2.26×10⁴ to calculate ΔGrxn.
ΔGrxn = -RTln(Kp) = -(8.314 J/mol K)(298 K)ln(2.26×10⁴) = -43.1 kJ/mol
Part B:
At equilibrium, the reaction quotient Qp is equal to Kp. Therefore, we can use the equilibrium pressure values given to calculate Qp and then use that to calculate ΔGrxn.
Qp = PCH3OH / (PCO x PH2²) = (1.1 atm) / (1.3×10⁻² atm x (1.3×10^-2 atm))^2 = 23.1
ΔGrxn = -RTln(Qp) = -(8.314 J/mol K)(298 K)ln(23.1) = 13.8 kJ/mol
Part C:
The given pressures are not at equilibrium, so we need to calculate Qp using these values and then use that to calculate ΔGrxn.
Qp = PCH3OH / (PCO x PH2²) = (1.1 atm) / (1.3×10⁻²atm x (1.3×10⁻²atm))²= 23.1
ΔGrxn = -RTln(Qp/Kp) = -(8.314 J/mol K)(298 K)ln(23.1/2.26×10⁴) = 41.9 kJ/mol

Learn more about concentration here:

https://brainly.com/question/3045247

#SPJ11

Find the enthalpy of hydration for an iodide ion in the process Rbl - Rb+ +|-. Use AHsol = - Hat + Hhydr.


AHsoi = 31. 0 kJ/mol


A Hiat = -630. 0 kJ/mol


AHnydr of Rb* = -315. 0 kJ/


mol


0-661. 0 kJ/mol


0-661 kJ/mol


0-284. 0 kJ/mol


0-284 kJ/mol

Answers

To find the enthalpy of hydration (ΔHhydr) for an iodide ion (I-) using the given equation ΔHsol = -ΔHat + ΔHhydr, we need to substitute the given values.

Given:

ΔHsol = 31.0 kJ/mol

ΔHat = -630.0 kJ/mol

ΔHhydr of Rb+ = -315.0 kJ/mol

Using the equation ΔHsol = -ΔHat + ΔHhydr, we rearrange it to solve for ΔHhydr:

ΔHhydr = ΔHsol + ΔHat

Substituting the values:

ΔHhydr = 31.0 kJ/mol + (-630.0 kJ/mol)

ΔHhydr = -599.0 kJ/mol

Therefore, the enthalpy of hydration for the iodide ion (I-) in this process is approximately -599.0 kJ/mol. The negative sign indicates an exothermic process, where energy is released during the hydration of the iodide ion.

Learn more about enthalpy of hydration here

https://brainly.com/question/31180293

#SPJ11

Other Questions
Which Sung dynasty innovation most helped sea trade flourish?gunpowderthe compassthe Silk Roadthe Grand Canal Q1/ Complete the dialogues.1 A: Does your finger hurt?B: Yes, it's very painful2 A: What's wrong with Dimitrios?B: He feels.**********I think it's something he ate.3 A: Did you hit your foot?B: Yes, and it really......4 A: My hand's bleeding quite badly.B: Well, put a5 A: Your finger's.B: I know. I cut it using that knife.6 A: Does Tanya still.B: Yes, she gets them all the time.7 A: What's the matter?round it.from bad headaches?........from sitting at that computer all day.illness.B: My back...........8 A: I understand Lena has had quite aB: Yeah. She was in hospital for over a week.Q/2 Find five more pairs of words. Why are they pairs?lung heart surgeon tablets/pills attack liveroperation cancer hepatitis sore medicine throatlung and cancer - because you can get lung cancer. Problem #5 (10pts) Design the source follower in the following figure for a drain current of 1mA and a voltage gain of 0.8. Assume nCox=100A/V2, VTH=0.4V, =0, VDD=1.8V, and RG=50k. Find RG ,Rs ,and (W/L). monday went by like a small summer cloud, like a dream in the first hours of dawn. in the united states (2006), 94% of the category of nonfatal occupational injury and illness consisted of injuries. True or False Mabel spends 444 hours to edit a 333 minute long video. She edits at a constant rate. How long does Mabel spend to edit a 999 minute long video? Given the circle below with secant ZY X and tangent W X, find the length of W X. Round to the nearest tenth if necessary. Jalisa earned $71. 25 today babysitting, which is $22. 50 more than she earned babysitting yesterday. The equation d 22. 50 = 71. 25 can be used to represent this situation, where d is the amount Jalisa earned babysitting yesterday. Which is an equivalent equation that can be used to find the amount Jalisa earned babysitting yesterday? 71. 25 minus 22. 50 = d 71. 25 22. 50 = d d 71. 25 = 22. 50 d minus 22. 50 = 71. 25. What is the order of Translation for a Paged Segmentation Scheme that only has one TLB, which is used for the Page Table?(Assume all Cache Lookups are Misses and RAM is Physically Addressed)Virtual Address -> Segment Table -> Page Table -> TLB -> Cache -> RAMChoiceVirtual Address -> Segment Table -> TLB -> Page Table -> Cache -> RAMChoiceVirtual Address -> Segment Table -> Page Table -> Cache -> TLB -> RAM Automatism defense includes a focus on the following issues (mark only one): A. mens rea, mental disease or defect B. actus rea, consciousness/whether voluntary C. actus rea, consciousness/whether voluntary, mental disease or defect D. mens rea, actus rea, mental disease or defect, consciousness/whether voluntary the sole (only) function of the gonads, the testes and ovaries, is the production of gametes, sperm and egg, respectively. true or false a rectangular glass block has a length of 100 mm, width 50 mm and depth 20 mm at 293 k. when heated to 353 k its length increases by 0.054 mm. what is the coefficient of linear expansion of glass? a. find the first four nonzero terms of the maclaurin series for the given function. b. write the power series using summation notation. c. determine the interval of convergence of the series. 7e^-2x. The first nonzero term of the Maclaurin series is According to some cross-sectional research, most siblings remain emotionally close during middle adulthood. O remain in touch, but become emotionally distant because of marriage. O have less contact during the child-raising years, but reestablish contact during middle and late adulthood. O fail to support one another when caring for elderly parents. f is 0 on irrational numbers and 1/q for y=p/q. (True or False) When a mass is attached to a spring, the period of oscillation is approximately 2.0 seconds. When the mass attached to the spring is doubled, the period of oscillation is most nearly a) 0.5 s b) 1.0 s c) 1.4 s d) 2.0 s e) 2.8 s 28. Identify the incorrectly punctuated sentence. (1 point) O He is a tough young man. O Many friendly, eager students are here.O We try to be honest polite people. O He's an intelligent, athletic sophomore.pls hurry X( a photograph is 5.5in long and 3.6 in wide it must be enlarged so that both dimensions are 2.6 times greater how wide will the photograph be then when operating near the suspected area of origin, fire fighters should be especially careful to: The cylinder has a diameter of 3.81 cm and a height of 25.4 cm. each sphere in the cyline has a diameter of 3.79 cm. how much of the cylinder is space that is not filled by the spheres