11.how is the molar solubility of a slightly soluble salt affected by the addition of an ion that is common to the salt equilibrium?

The complete ionic and balanced equation of displacement reaction will be - Ca + 2H20 – Ca(OH)2 + H2

In the given equation Calcium and Water yield together to form Calcium Hydroxide and Hydrogen. The reaction which takes place between calcium and water is the example of displacement reaction. In the displacement reaction in the given equation calcium is displaced by hydrogen from the water so to form Calcium Hydroxide.

In a displacement reaction atoms are displaced by another atom in any given molecule. Here the more reactive element displaces the less reactive element. Similar concept is used in the above equation where Calcium takes hydrogen with itself as it is more reactive in nature and forms a new compound of Calcium Hydroxide and Hydrogen releases.

Learn more about displacement reaction here:

https://brainly.com/question/29307794

#SPJ4

Answer:

one milliliter

Explanation:

In the metric system, the prefix m stands for “milli”, which means “1/1,000 of”. So 1 ml (milliliter) is only 1/1,000 of 1 l (liter). Therefore, 1 ml is smaller than 1 l.

The type of the soil where the water drains too rapidly and it dry our quickly is the sandy soil. The sandy soil has large space between the particles for passing out water through the soil.

The soil that has the large space between the  particles , so that the water can pass out quickly and the soil dry out quickly. The sandy soil is has the rough texture. . The sandy soil drains out quickly as compared to the other soil. The sandy soil is very good for the plants as it has the good drainage.

Thus , the soil that drains out too rapidly and dry out quickly is the sandy soil.

To learn more about soil here

https://brainly.com/question/21966736

#SPJ4

Answer:

Balanced equation:

2 moles of Al react with 6 moles of HCl. 2 moles of AlCl₃ and 3 moles of H₂ are produced.

The answer is C.

The mathematical tool used to determine the ratio of elements in a compound is called stoichiometry.

Stoichiometry is a tool that uses the balanced chemical equation of the reaction to calculate the ratio of elements in a compound. Stoichiometry is based on the concept of the law of conservation of mass, which states that the total mass of the reactants must equal the total mass of the products. By using the balanced chemical equation, we can calculate the ratio of elements in a compound using a set of mathematical calculations called stoichiometric calculations. These calculations involve using the balanced chemical equation and the molar masses of the elements to determine the number of moles of each element in the compound. This information can then be used to determine the ratio of elements in the compound.

Learn more about Stoichiometry here: brainly.com/question/26387374

#SPJ4

Generally, There are several types of chemical reactions, including synthesis, decomposition, single replacement, double replacement, and combustion.

In conclusion, it is important to understand the different types of chemical reactions as they can have different outcomes and uses in various fields such as chemistry, biology and material science.

Read more about Types of Reactions Analysis and conclusion

https://brainly.com/question/2506879

#SPJ1

Neil Bohr's model of an atom as a central nucleus which contain protons and neutrons with the orbits in an circular orbit  at specific distances and the electrons in an atom are arranged in shells that surrounds the nucleus.

Bohr model of the atom was proposed by Neil Bohr in 1915. It came into existence with the modification of Rutherford’s model of an atom. Rutherford’s model introduced the nuclear model of an atom, in which he explained that a nucleus which is (positively charged) surrounded by the negatively charged electrons. Electrons in an atom are arranged in shells which surround the nucleus, with each successive shell being farther away from the nucleus. Subshells consist of one or more atomic orbitals and electron shells consist of one or more subshells.

To know more about nucleus here

https://brainly.com/question/23366064

#SPJ4

Maltose is a disaccharide formed by the formation of alpha 1,4glycosidic bond between glucose and alpha D glucose unit

A disaccharide is a type of carbohydrate that is created by combining two units of glucose. Succrose, maltose, and lactose are the three most prevalent kinds of disaccharide. The other disaccharides are lactulose, trehalose, and cellobiose, which are less well-known. Dehydration reactions are those that occur when one water molecule is eliminated by combining two monosaccharides, resulting in the formation of a molecule of a disaccharide.

Two alpha D glucose units make up the disaccharide maltose, usually referred to as malt. An alpha 1,4 glycosidic linkage connects the two glucose units. The enzymes maltase and isomaltase break down the molecules of maltose into two glucose molecules in the human small intestine mucosa, which are then absorbed by the body. After cellulose, starch is the carbohydrate that is most prevalent in plant cells.

Formula --C12H22O11

To know  more about Disaccharides,Refer to:

https://brainly.com/question/12921453

#SPJ4

Thompson's model concluded that the atom contained something small and negative. The correct option to this question is C.

Thomson's description of the atomic model is one of many scientific models of the atom. Created by J.J. Thomson in 1904, shortly after the electron was discovered. However, the atomic nucleus had not yet been discovered at that time. So he proposed a model based on the known properties available at the time. Known properties are:

Atoms are neutrally charged

Inside an atom are negatively charged particles called electrons. According to the assumptions of Thomson's atomic model, an atom resembles a positively charged sphere with electrons (negatively charged particles) inside.

For more information on Thompson's model kindly visit to

https://brainly.com/question/14246826

#SPJ1

Quantity of heat released = -63.1 kJ

Given:

Enthalpy of vaporization of water, ΔHvap = 40.7 kJ/mol

Mass of water, m = 27.9 g

To determine:

The amount of heat (Q) released

The reaction is: H2O(g) ↔ H2O(l)

The amount of heat evolved during condensation which involves a phase transition from vapor to liquid is given as:

Q=n*Delta H vape

n = moles of water

Since this is a condensation process: ΔHcond = -ΔHvap

Q=27.9g/18g mol * -40.7 k j/mol=63.1 k j

To learn more about quantity of heat refers to;

https://brainly.com/question/4353541

#SPJ4

The highest zeff , effective nuclear charge for its valence electron from the give option is the F with the value of 5.2.

The Zeff can be calculated by the following formula :

Zeff = Z - s

where ,

Z is the atomic number

s is the shielding effect

F = 9 - (0.35 × 6 + 0.85 × 2 )

F = 5.2 for its valence electrons.

Li = 3 - 1.7

    = 1.3

O = 8 - ( 2 × 0.85 + 5 × 0.35 )

   = 4.5

C = 6 - (2 × 0.85 + 3 × 0.35)

   = 3.25

Na = 11 - ( 2 × 1 ) + (  8 × 0.85 )

Na = 2.20

To learn more about Zeff here

https://brainly.com/question/2005778

#SPJ4

The minimum number of grams of propane for the given question is calculated as 55.39 g.

Propane is a three-carbon alkane with molecular formula of C₃H₈. It is a gas at a standard temperature and pressure but is compressible to a transportable liquid.

Given, mass of ice = mass of water = 4.10 kg = 4100 g

and temperature of ice = -16 °C ; Temperature of water = 75.5 °C

Heat required to change  ice to water under the specified conditions is:-

As we know, q = q(-16 C to 0°C) + q(fusion) + q (0 C to 75.5 °C)

So q  = m*c(ice)*ΔT(ice) + m*ΔHfusion + m*c(water)*ΔT(water)

 = 4100[2.03(0-(-16)) + 334 + 4.18(75.5-0)]

q = 2796 kJ

As the enthalpy change for combustion of propane is -2220 kJ/mol

Therefore, now the number of moles of propane corresponding to required energy of 2796 kJ ;

= 1 mole * 2796 kJ/2220 kJ

= 1.259 moles of propane

As we know molar mass of propane = 44 g/mol

So, mass of propane required = 1.259 moles * 44 g/mol

Hence we get, mass of propane required  = 55.39 g

To know more about propane, refer

https://brainly.com/question/1458180

#SPJ1

OSHA would only require the use of eight of the nine pictograms that the GHS employs. Although not required, the environmental pictogram could be employed to provide supplementary information.

Anything without risks to one's physical safety and health is not dangerous and does not need a safety data sheet (SDS). Be aware that many dusts, including flour as well as hardwood dusts, contain potential health risks and demand an SDS.

Wood or wood-based items. the definition of explosives in the Explosives Act. radioactive nuclear substances as defined by the Nuclear Safety as well as Control Act. hazardous waste which is being bought and sold either through recovery, recycling, and disposal.

To know more about pictograms

https://brainly.com/question/29898314

#SPJ4

Process of separating components of mixture is called chromatography . To get the process started, mixture is dissolved in a substance called mobile phase, which carries it through a second substance which is stationary phase.

Stationary phase is the phase that doesn't move and the mobile phase is the phase that moves. Mobile phase moves through the stationary phase picking up the compounds that is to be tested.

There are intermolecular forces, such as hydrogen-bonding and dipole-dipole interactions in chromatography, that helps retain the analyte to stationary phase of the column. The stronger is the intermolecular forces, stronger and longer is the compound is retained in column.

To know more about chromatography, refer

https://brainly.com/question/11960023

#SPJ1

The best-fit line of an experimental scatterplot is used to identify any linear patterns in the scattered data.

A line of best fit is a straight line that minimizes the distance between it and certain data. The line of best fit is used to represent a connection in a scatter plot with several data points. Regression analysis' byproduct serves as a tool for predicting indicators and price fluctuations.

A scatter plot's data is most accurately represented by a straight line known as the line of best fit. It is possible for this line to pass through some, all, or none of the points.

To learn more about best fit line refers to:

brainly.com/question/23957040

#SPJ4

When 30000 g of C2H2 burns completely, 29.34 g of CO2 will be produced.

Burns are a type of injury to the skin caused by heat, cold, electricity, radiation, friction, or chemicals.

The reaction of acetylene (C2H2) with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O) can be written as follows:
2 C2H2(g) + 5 O2(g) → 4 CO2(g) + 2 H2O(g)
To calculate the amount of CO2 produced when 30000 g of C2H2 burns completely, we can use the balanced chemical equation to determine the ratio of moles of CO2 produced per mole of C2H2. Since the equation shows that 4 moles of CO2 are produced for every 2 moles of C2H2, we can set up the following equation to solve for the mass of CO2 produced:
Mass of CO2 = (2 mol C2H2/30000 g C2H2) * (4 mol CO2 * 44.01 g CO2/1 mol CO2)
Solving for the mass of CO2, we get:
Mass of CO2 = 29.34 g CO2
Therefore, when 30000 g of C2H2 burns completely, 29.34 g of CO2 will be produced.

To learn more about burns
https://brainly.com/question/25148363
#SPJ1

6.02 x10^23 carbon atoms have a mass of 12.04 grams.

An element's atomic mass is the average mass of its atoms measured in atomic mass units (amu, also known as daltons, D). The atomic mass is a weighted average of all the isotopes of that element, calculated by multiplying the mass of each isotope by its abundance.

The atomic mass of carbon is 12.0107 grams/mol. Since 1 mole of carbon atoms is equal to 6.02 x 10^23 atoms, the mass of 6.02 x 10^23 atoms can be calculated by multiplying the atomic mass of carbon by 6.02 x 10^23. 12.0107 grams/mol x 6.02 x 10^23 = 12.04 grams. This is the mass of 6.02 x 10^23 carbon atoms.

For more questions like Mass the link below:

https://brainly.com/question/30193521

#SPJ4

Option - C : Steam is the physical states of water contains particles with the highest kinetic energy. Because water in a gaseous form, has its particles moving around the most. Therefore, having the highest kinetic energy .

Kinetic energy is the energy that a moving item possesses. An item can only be accelerated through the application of a force. Applying force requires effort on our part. Following completion of the work, energy is transferred to the object, which then moves at a new, constant speed. Kinetic energy is the force that drives motion, and it may be observed in the motion of objects and subatomic particles. Every particle and moving object contains kinetic energy. Walking, a baseball flying through the air, food falling from a table, and a charged particle in an electric field are some examples of kinetic energy in action. The power is the energy , an object in motion possesses.

The word "kinetic" derives from the Greek "kinesis," which means motion.

For such more questions on Kinetic energy:

brainly.com/question/26472013

#SPJ4

Stoichiometry and the mole concept state that a reaction between 1 x 1010 molecules and extra hydrogen produced 2 x 1010 molecules of ammonia.

A chemical reaction's stoichiometry involves figuring out the ratios of its constituent elements or molecules. The underlying laws of the associated relationships are the law of mass preservation and the law on combining weights & volumes.

To determine the amounts of different compounds contained in the sample, stoichiometry is employed in quantitative analysis.

The balance of chemical equations requires it.

In the example provided, since 1 molecule of nitrogen creates 2 molecules of ammonia, 2 x 1010 molecules o ammonia will be created when 2 x 10101/2=1 molecule.

As a result, 1 x 1010 molecules formed 2 x 1010 molecules of ammonia when they were combined with extra hydrogen.

To know more about stoichiometry visit:

https://brainly.com/question/30215297

#SPJ4

Answer: 2.0g NH3

Explanation:

First we have to make a balanced equation (should be: N2 + 3H2 -> 2NH3) then we convert the N2 (Nitrogen gas) to moles by finding the molar mass of N2 (28.02g) divide that and multiply by the number of moles of Ammonia (NH3). This would give us 2.0g of NH3. Hope that helps!

Aluminum oxide has a chemical formula of Al2O3.

A white, odorless powder known as aluminum oxide. Insoluble in water. The preparation process affects the properties (both physical and chemical); various preparation techniques result in various crystalline changes. The variation created at really high temperatures is chemically quite inert. Technical grade alumina is mostly made of alpha-Alumina. Natural aluminum oxide is corundum. Aluminum oxide comes in an impure crystalline version called Emery. (NIOSH, 2022).

an aluminum oxide that can be found in nature as different minerals such as bauxite, corundum, etc. It is employed in the production of dental cement, and refractories, and as a catalyst, desiccating agent, and adsorbent.

Know more about Aluminum oxide at:

https://brainly.com/question/11251774

#SPJ4

I think its Thermal Energy

Answer:

She is using magnetic force

Explanation:

You must divide when converting from grams to moles or from particles to moles, you must divide the number of grams by the molar mass.

Following the grammes to moles formula, n = m / M, where M is the material's molar mass, will allow you to accurately calculate the number of moles, n, of a substance with a given mass, m, (in grammes).

A mole-mass conversion is the most straightforward sort of manipulation that uses molar mass as a conversion factor (or its reverse, a mass-mole conversion). We convert mole units into mass units in this conversion by using the molar mass of the substance as a conversion factor (or, conversely, mass units into mole units).

To know more about mole-mass visit:

brainly.com/question/24191825

#SPJ1

Answer:

Below

Explanation:

Each mole is Avagadro's Number (6.022 x 10^23 ) molecules

6.022 x 10^23   x 3.54 = 21.32 x 10^23 = 2.132 x 10^24 molecules

Gold metal had the highest price movement when viewed in glco function.

During economic recession , investments in gold has increased unexpectedly, which resullted in the highest price movement of gold.

Gold is the most ductile and malleable element on our planet. It is a great metal for jewellery because it never tarnishes.

The color and luster of gold are what make this metal so attractive. Gold is found as the free metal and in tellurides. It is widely distributed and almost always associated with pyrite or quartz.  

Gold is a good conductor of electricity and heat. It is not affected by exposure to air or to most reagents. It is inert and a good reflector of infrared radiation. Gold is usually alloyed to increase its strength.

To know more about gold here

https://brainly.com/question/18044463

#SPJ4

The sigma bonds and pi bonds does the given  molecule have  is :

(CH₃)₂CCHCH₂CCCOOH , 19 sigma bond and 4 pi bond.

The given molecule given below :

(CH₃)₂CCHCH₂CCCOOH

     H         H   H               O

      |           |     |                 ||

H₂ - C - C = C - C - C ≡ C - C - O - H

            |             |

     H - C - H      H

            |

           H

The single bond in the molecule represent the one sigma bond . the double bond in the molecule represent the one sigma bond and the one pi bond. The triple bond in the molecule represent the one sigma bond and the two pi bond.

To learn more about bond here

https://brainly.com/question/14018074

#SPJ4

A mole ratio is the ratio between the amounts in moles of any two compounds involved in a balanced chemical reaction

What is salt formation equation?

.

To learn more about salt refers to;

https://brainly.com/question/24897763

#SPJ1

Once upon a time, there was a spacecraft named "Dawn" that was launched on a mission to study the dwarf planet Ceres. The spacecraft was equipped with state-of-the-art technology and a team of highly skilled scientists and engineers were aboard to control and monitor the mission.

As Dawn approached Ceres, the team was amazed at the vast, barren landscape that stretched out before them. They couldn't wait to start collecting data and analyzing the planet's surface. However, soon after they arrived, they encountered a problem. The spacecraft's landing gear malfunctioned and they were unable to land on the surface.

The team quickly came up with a plan B and decided to study Ceres from orbit. They began to collect data and take pictures of the planet's surface. They were shocked to find that Ceres had a surprisingly varied landscape, with towering mountains, deep craters, and mysterious bright spots.

As the mission continued, the team discovered that Ceres had a subsurface ocean beneath its icy crust. The team was thrilled at this discovery and knew that it would greatly contribute to the understanding of our solar system.

However, just as they were about to wrap up their studies, the team received a distress signal from a nearby spacecraft that was in trouble. Without hesitation, the team of Dawn set course to investigate and assist.

As they neared the other spacecraft, they saw that it was under attack by a group of rogue asteroids. The team of Dawn quickly came up with a plan and using their advanced technology, they were able to defend the other spacecraft and destroy the asteroids.

The other spacecraft, grateful for the help, thanked the team of Dawn and they continued on their journey. The team of Dawn, proud of their bravery and the success of their mission, returned to Earth with a wealth of new data and knowledge about Ceres and the Solar System.

The Dawn spacecraft mission was a great success and it helped scientists understand more about the dwarf planet Ceres, and it also demonstrated the courage, resourcefulness, and the sense of camaraderie of the team.