Therefore, the period of the system is 2.513 s and the amplitude of the motion is 1.591 m.
1. In order to calculate how much you will weigh at Big Bear lake, we need to take into account the effect of gravity. The force of gravity depends on the mass of the two objects involved and the distance between them. The mass of the Earth is much larger than our own mass, so we can assume that it does not change significantly. However, the distance between us and the center of the Earth does change as we move higher up.
Using the formula for the force of gravity (F = G * m1 * m2 / r^2), where G is the gravitational constant (6.6743 × 10^-11 N*m^2/kg^2), m1 is the mass of the Earth, m2 is our own mass, and r is the distance between us and the center of the Earth, we can calculate the force of gravity acting on us at each location.
At the beach near San Diego, the force of gravity acting on us is F1 = G * m1 * m2 / r1^2 = (6.6743 × 10^-11) * (5.97 × 10^24) * (58) / (6,371,000)^2 = 570.09 N.
At Big Bear lake, the force of gravity acting on us is F2 = G * m1 * m2 / r2^2 = (6.6743 × 10^-11) * (5.97 × 10^24) * (58) / (6,373,000)^2 = 567.60 N.
Therefore, our weight at Big Bear lake is approximately 567.60 N, which is slightly less than our weight at the beach near San Diego.
2. The period of an oscillating spring-mass system is given by the formula T = 2π * √(m/k), where T is the period, m is the mass of the object attached to the spring, and k is the spring constant.
In this case, m = 0.20 kg and k = 0.50 N/m, so we can calculate the period as T = 2π * √(0.20/0.50) = 2.513 s.
The amplitude of the motion is the maximum displacement from the equilibrium position. We can find this value by using the formula Umax = A * ω, where Umax is the maximum speed achieved by the mass, A is the amplitude of the motion, and ω is the angular frequency (which is equal to 2π/T).
Rearranging this formula, we get A = Umax / ω = Umax / (2π/T) = Umax * T / (2π) = 2.0 * 2.513 / (2π) = 1.591 m.
Therefore, the period of the system is 2.513 s and the amplitude of the motion is 1.591 m.
To know more about amplitude visit:-
https://brainly.com/question/29546637
#SPJ11
how much heat energy, in kilojoules, is required to convert 41.6 g of ice at −18.0 oc to water at 25.0 oc ?
6.14 kJ of heat energy is required to convert 41.6 g of ice at -18.0°C to water at 25.0°C.
To answer your question, we need to use the formula:
q = m x ΔT x c
where q is the amount of heat energy in kilojoules, m is the mass of the substance in grams, ΔT is the change in temperature in degrees Celsius, and c is the specific heat capacity of the substance.
First, we need to calculate the amount of heat energy required to melt the ice:
q1 = m x ΔT x c
q1 = 41.6 g x (0°C - (-18°C)) x 2.108 J/g°C (specific heat capacity of ice)
q1 = 1759.97 J or 1.76 kJ
Next, we need to calculate the amount of heat energy required to heat the water from 0°C to 25°C:
q2 = m x ΔT x c
q2= 41.6 g x (25°C - 0°C) x 4.184 J/g°C (specific heat capacity of water)
q2 = 4383.27 J or 4.38 kJ
Finally, we add the two amounts of heat energy together to get the total amount of heat energy required:
q = q1 + q2
q = 1.76 kJ + 4.38 kJ
q = 6.14 kJ
Therefore, it takes 6.14 kilojoules of heat energy to convert 41.6 g of ice at -18.0°C to water at 25.0°C.
To know more about Celsius visit:
https://brainly.com/question/1373930
#SPJ11
soccer fields vary in size. a large soccer field is 100 meters long and 80 meters wide. what are its dimensions in feet? (assume that 1 meter equals 3.281 feet. for each answer, enter a number.)
The dimensions of the large soccer field in feet are approximately 328.1 feet long and 262.5 feet wide.
A measure of the size or extent of something in a particular direction is called dimension and the term is used in various fields, including mathematics, physics, and geometry, among others.
To convert the dimensions of the soccer field from meters to feet, we need to multiply each dimension by 3.281.
Length in feet: 100 meters x 3.281 feet/meter = 328.1 feet
Width in feet: 80 meters x 3.281 feet/meter = 262.5 feet
Therefore, the dimensions of the large soccer field in feet are approximately 328.1 feet long and 262.5 feet wide.
To know more about dimension, refer
https://brainly.com/question/26740257
#SPJ11
Choose the correct statements concerning spectral classes of stars. (Give ALL correct answers, i.e., B, AC, BCD...)
A) K-stars are dominated by lines from ionized helium because they are so hot.
B) Neutral hydrogen lines dominate the spectrum for stars with temperatures around 10,000 K because a lot of the hydrogen is in the n=2 level.
C) The spectral sequence has recently been expanded to include L, T, and Y classes.
D) The spectral types of stars arise primarily as a result of differences in temperature.
E) Oh Be A Fine Guy/Girl Kiss Me, is a mnemonic for remembering spectral classes.
F) Hydrogen lines are weak in type O-stars because most of it is completely ionized.
The correct statements concerning spectral classes of stars are B, C, D, F.
A) This statement is incorrect because K-stars are cooler stars and are not hot enough to be dominated by ionized helium lines.
B) This statement is correct. When the temperature of a star is around 10,000 K, most of the hydrogen atoms are in the second energy level (n=2), which leads to the formation of strong neutral hydrogen lines.
C) This statement is correct. The original spectral sequence (OBAFGKM) has been expanded to include additional classes such as L, T, and Y, which are used to classify cooler and less massive stars.
D) This statement is correct. The spectral types of stars are primarily based on temperature, which influences the ionization state and the strength of spectral lines in the star's spectrum.
E) This statement is a mnemonic used to remember the spectral sequence but is not a statement concerning spectral classes of stars.
F) This statement is correct. Type O-stars are the hottest and most massive stars, and their surface temperature is high enough to ionize most of the hydrogen atoms, which results in the weakness of hydrogen lines in their spectra.
Hence, B,C,D,F statements are correct which concerning spectral classes of stars .
To know more about Spectral classes refer here :
https://brainly.com/question/28216076
#SPJ11
An AC circuit has a voltage source amplitude of 200 V, a resistance of 500 ohms, an inductor of 0.4 mH, and a capacitor of 100 pF and an angular frequency of 5.00x10^5 rad/s.
a) What is the impedance?
b) What is the current amplitude?
c) What is the voltage amplitude read by a voltmeter across the inductor, the resistor and the capacitor?
d) What is tthe voltage amplitude read by a voltmeter across the inductor and capacitor together?
(a) The impedance of the circuit is 19,806.3 ohms.
(b) The current amplitude is 0.01 A.
(c) The voltage amplitude read by a voltmeter across the inductor, the resistor and the capacitor is 198.1 V.
(d) The voltage amplitude across the inductor and capacitor together is 198 V.
What is the impedance of the circuit?The impedance of the circuit is calculated as follows;
Z = √(R² + (Xl - Xc)²)
where;
R is the resistanceXl is the inductive reactanceXc is the capacitive reactanceR = 500 ohms
Xl = ωL = 5 x 10⁵ rad/s x 0.4 mH = 200 ohms
Xc = 1 / (ωC) = 1 / (5 x 10⁵ rad/s x 100 pF) = 20,000 ohms
Z = √(500² + (20,000 - 200)²)
Z = 19,806.3 ohms
The current amplitude is calculated as follows;
I = V/Z
where;
V is the voltage source amplitudeI = 200 V / 19,806.3 ohms = 0.01 A
The voltage amplitude across each component can be calculated using Ohm's Law;
Vr = IR = 0.01 A x 500 ohms = 5 V
Vl = IXl = 0.01 A x 200 ohms = 2 V
Vc = IXc = 0.01 A x 20,000 ohms = 200 V
V = √(VR² + (Vl - Vc)²
V = √5² + (200 - 2²)
V = 198.1 V
The voltage amplitude across the inductor and capacitor together is calculated as;
VL-C = √((Vl - Vc)²)
VL-C = √((200 - 2)²)
VL-C = 198 V
Learn more about amplitude voltage here: https://brainly.com/question/7465255
#SPJ4
Problem 3: Consider a circuit consisting of several resistors connected in series. A Which of the following statements are true about this situation? OCurrent flowing through each of them is the same. OIt is impossible to answer without knowing the actual magnitude of OPower dissipated on each of them is the same.
In a circuit consisting of several resistors connected in series, the statement that is true is that the current flowing through each of them is the same. It is impossible to determine the power dissipated on each of them without knowing the actual magnitudes of the resistors.
When resistors are connected in series, the current flowing through the circuit is constant throughout. This means that the same amount of current passes through each resistor in the series.
This is a fundamental property of a series circuit, where the current encounters each resistor in succession. Therefore, the statement that the current flowing through each of the resistors is the same is true.
On the other hand, the power dissipated on each resistor depends not only on the current but also on the magnitude of the resistors themselves.
The power dissipated on a resistor can be calculated using the formula P = I²R, where P is the power, I is the current, and R is the resistance. Since the resistors in series may have different resistance values, it is impossible to determine the power dissipated on each resistor without knowing their individual resistances.
Therefore, the statement that the power dissipated on each of the resistors is the same is false. The power dissipated will vary depending on the individual resistance values.
Learn more about resistors here :
https://brainly.com/question/30672175
#SPJ11
A loop of wire carrying a current of 6. 7 A is in the shape of an isosceles right triangle (right triangle with two equal sides, each 11 cm long). A 9. 1 T uniform magnetic field is in the plane of the triangle and oriented perpendicular to the hypotenuse of the right triangle. What is the magnitude of the resulting magnetic force, in newtons, on the two sides
The magnitude of the magnetic force acting on the two sides of an isosceles right triangle, carrying a current of 6.7 A, placed in a 9.1 T uniform magnetic field perpendicular to the hypotenuse, is calculated below.
The formula for calculating the magnetic force is F = BIL, where B represents the magnetic field strength, I is the current, and L denotes the length of the wire.To find the force on each side, we need to consider that one side of the triangle is the hypotenuse, while the other two sides are equal in length.
Let's denote the length of the equal sides as L. The hypotenuse, according to the Pythagorean theorem, can be calculated as [tex]\sqrt{ (2L^2).[/tex] In this case, L is given as 11 cm, so the hypotenuse is √(2 * 11^2) = √242 cm.
Now we can calculate the force on each side. Since the current flows through both equal sides, the length L is used in the formula. The magnitude of the force can be calculated as F = BIL. Plugging in the values, we have F = (9.1 T) * (6.7 A) * L.
To obtain the magnitude of the resulting magnetic force, we need to multiply the calculated force by the number of equal sides. As there are two equal sides, the resulting magnetic force on each side is 2 * F.
To get the final numerical value of the magnetic force, we substitute L with 11 cm and perform the calculations. The final answer will be in newtons.
Learn more about magnetic field strength here
https://brainly.com/question/28104888
#SPJ11
if the air temperature is 20°c and the vapor pressure has the same value as the saturation vapor pressure, the relative humidity is
Relative humidity is a measure of how much moisture the air can hold at a certain temperature compared to how much moisture it is currently holding. If the air temperature is 20°C and the vapor pressure has the same value as the saturation vapor pressure, this means that the air is holding the maximum amount of moisture it can hold at that temperature. In other words, the air is completely saturated with water vapor.
Therefore, the relative humidity in this scenario would be 100%, as the air is holding the maximum amount of moisture it can hold at that temperature. This means that the air is at its dew point, and any further cooling of the air would result in condensation or fog.
It's important to note that relative humidity can change depending on the temperature of the air. For example, if the temperature decreases while the amount of moisture in the air remains the same, the relative humidity would increase because the air is now closer to being saturated. Conversely, if the temperature increases while the amount of moisture in the air remains the same, the relative humidity would decrease because the air can now hold more moisture.
to know more about Relative humidity click this link
brainly.com/question/30415486
#SPJ11
the desired overall magnification of a compound microscope is 145✕. the objective alone produces a lateral magnification of 14.0✕. determine the required focal length of the eyepiece.
To determine the required focal length of the eyepiece, first calculate the magnification produced by the eyepiece, then use the lens formula to find the focal length.
1. Calculate the magnification produced by the eyepiece:
Overall magnification = Objective magnification x Eyepiece magnification
145✕ = 14.0✕ * Eyepiece magnification
Eyepiece magnification = 145✕ / 14.0✕ = 10.36✕
2. Use the lens formula to find the focal length:
Lens formula: 1/f = 1/u + 1/v
Where f is the focal length, u is the object distance, and v is the image distance.
For a microscope eyepiece, the object distance (u) is typically at the focal point, so u = f. The image distance (v) is the near point of vision, usually assumed to be 25 cm for the human eye.
Substituting the values in the lens formula:
1/f = 1/f + 1/25 cm
1/f - 1/f = 1/25 cm
f = 25 cm / 10.36✕
3. Calculate the focal length of the eyepiece:
f = 25 cm / 10.36✕ ≈ 2.41 cm
The required focal length of the eyepiece for the desired overall magnification of 145✕ in a compound microscope is approximately 2.41 cm.
To know more about focal length, visit;
https://brainly.com/question/28039799
#SPJ11
in an experimental design that has three levels of the independent variable, a significant f value indicates that
When conducting an experiment with three levels of the independent variable, a significant f value indicates that there is a statistically significant difference between at least two of the levels.
In other words, the results of the experiment suggest that the independent variable has a significant effect on the dependent variable. The f value is a measure of how much variance in the dependent variable can be explained by the independent variable. A significant f value means that the variation in the dependent variable that can be attributed to the independent variable is greater than what would be expected by chance. This can lead researchers to reject the null hypothesis and accept the alternative hypothesis that the independent variable does have a significant effect on the dependent variable. It is important to note, however, that a significant f value does not necessarily mean that all three levels of the independent variable are significantly different from each other. Additional analyses, such as post-hoc tests, may be necessary to determine which specific levels differ significantly from one another.
To know more about independent variable click this link-
https://brainly.com/question/1479694
#SPJ11
A 10 kilo-ohm resistor is connected in series with a 20 micro-Farad capacitor. What is the time constant of this RC circuit?
The time constant of this RC circuit is 0.2 seconds
The time constant of an RC circuit is a measure of how long it takes for the voltage across the capacitor to reach approximately 63.2% of its final value after a voltage is applied or removed. The time constant (τ) can be calculated using the formula: τ = R × C, where R is the resistance in ohms (Ω) and C is the capacitance in farads (F).
In the given circuit, a 10 kilo-ohm resistor (R = 10,000 Ω) is connected in series with a 20 micro-Farad capacitor (C = 20 × 10⁻⁶ F). To find the time constant, we can plug these values into the formula:
τ = R × C
τ = (10,000 Ω) × (20 × 10⁻⁶ F)
Multiplying these values, we get:
τ = 0.2 seconds
Therefore, the time constant of this RC circuit is 0.2 seconds. This means it takes approximately 0.2 seconds for the voltage across the capacitor to reach about 63.2% of its final value after a voltage is applied or removed from the circuit. The time constant is an important parameter in analyzing the transient response and frequency characteristics of RC circuits, as it helps to determine the charging and discharging rates of the capacitor.
Learn more about time constant here: https://brainly.com/question/30543992
#SPJ11
a radio station broadcasts at a frequency of 92.2 mhz with a power output of 51.4 kw .a. What is the energy of each emitted photon in joules ?b. What is the energy of each emitted photon in electron volts?c. How many photons are emitted per second?
The energy of each photon is 6.11 x 10⁻²⁶ J.The energy in eV is 3.82 x 10¹² eV.The photons emitted per second is 7.75 x 10²² photons/s.
We can then calculate the energy of each photon by using the equation E = hf, where h is Planck's constant (6.626 x 10⁻³⁴ J s). Substituting the given values, we get E = 6.626 x 10⁻³⁴ J s * 9.22 x 10⁷ Hz = 6.11 x 10⁻²⁶ J.
The energy of a photon can also be expressed in electron volts (eV),
1 eV = 1.6 x 10⁻¹⁹ J. Therefore, the energy of each photon emitted by the radio station in electron volts can be calculated by dividing the energy in joules by the conversion factor. Substituting the given value of E = 6.11 x 10⁻²⁶ J, we get E = 6.11 x 10⁻²⁶ J / (1.6 x 10⁻¹⁹ J/eV)
= 3.82 x 10¹² eV.
The power output of the radio station is given as 51.4 kW. Power is defined as the rate at which energy is transferred, so the energy emitted per second is given by P = E/t, where P is the power, E is the energy, and t is the time. Rearranging this equation, we get t = E/P. Substituting the given values, we get t = 6.11 x 10⁻²⁶ J / 51.4 x 10³ W = 1.19 x 10⁻¹⁵ s. Therefore, the number of photons emitted per second is given by the frequency divided by the time taken, which is (9.22 x 10⁷ Hz) / (1.19 x 10⁻¹⁵ s)
= 7.75 x 10²² photons/s.
learn more about energy and power here :
brainly.com/question/14419982
#SPJ4
One of the many isotopes used in cancer treatment is 19879Au, with a half-life of 2.70 d. Determine the mass of this isotope that is required to give an activity of 215 Ci. Answer in mg.
The mass of 19879Au required to give an activity of 215 Ci is approximately 12.1 mg. Solving for m gives us approximately 12.1 mg of 19879Au.
To calculate the mass of 19879Au needed to give an activity of 215 Ci, we can use the following equation:
Activity = (ln2 x N x m) / t
Where N is Avogadro's number, m is the mass of the isotope in grams, t is the half-life in seconds, and ln2 is the natural logarithm of 2.
Rearranging this equation to solve for mass, we get:
m = (Activity x t) / (ln2 x N)
Substituting the given values, we get:
m = (215 x 24 x 3600) / (ln2 x 6.022 x 10^23 x 198)
Solving for m gives us approximately 12.1 mg of 19879Au.
learn more about mass here:
https://brainly.com/question/15959704
#SPJ11
a football is kicked straight up into the air and reaches a maximum height of 22 m. how long after the kick will theball hit the ground?
To determine the time it takes for the football to hit the ground after being kicked straight up into the air, we can use the equation for vertical motion under gravity.
The motion of the football can be divided into two parts: the upward motion and the downward motion.
1. Upward motion:
The initial velocity (u) of the football when it is kicked straight up is given as zero since it starts from rest. The acceleration (a) acting on the football is due to gravity and is equal to -9.8 m/s^2 (taking into account the negative direction). The displacement (s) is 22 m, the maximum height reached.
Using the equation:
s = ut + (1/2)at^2,
where s is the displacement, u is the initial velocity, a is the acceleration, and t is the time, we can solve for the time taken for the upward motion.
22 = 0 + (1/2)(-9.8)t^2,
11 = -4.9t^2.
Simplifying the equation, we have:
t^2 = -11 / -4.9,
t^2 = 2.2449.
Taking the square root of both sides:
t ≈ 1.498 seconds (rounded to three decimal places).
2. Downward motion:
The time it takes for the football to reach the ground will be the same as the time taken for the upward motion. This is because the total time of flight is symmetrical in vertical motion under gravity.
Therefore, approximately 1.498 seconds after the kick, the football will hit the ground.
Learn more about motion under gravity and projectile motion here:
https://brainly.com/question/30818954?referrer=searchResults
#SPJ11
In a waiting line situation, arrivals occur, on average, every 12 minutes, and 10 units can be processed every hour. What are λ and μ?a) λ = 5, μ = 6b) λ = 12, μ = 6c) λ = 5, μ = 10d) λ = 12, μ = 10
In a waiting line situation, arrivals occur, on average, every 12 minutes, and 10 units can be processed every hour., we get λ = 5 and μ = 10. The correct option is c) λ = 5, μ = 10.
In a waiting line situation, we need to determine the values of λ (arrival rate) and μ (service rate). Given that arrivals occur on average every 12 minutes, we can calculate λ by taking the reciprocal of the time between arrivals (1/12 arrivals per minute). Converting to arrivals per hour, we have λ = (1/12) x 60 = 5 arrivals per hour.
For the service rate μ, we are told that 10 units can be processed every hour. Therefore, μ = 10 units per hour.
These values represent the average rates of arrivals and processing in a waiting line situation, which are essential for analyzing queue performance and making decisions to improve efficiency.
You can learn more about waiting lines at: brainly.com/question/28564214
#SPJ11
A space station is in a circular earth orbit of radius 6600 km. An approaching spacecraft executes a delta-v burn when its position vector relative to the space station is . Just before the burn the relative velocity of the spacecraft was . Calculate the total delta-v required for the spacecraft to rendezvous with the station in one-third period of the space station orbit.
The total delta-v required for the spacecraft to rendezvous with the station in one-third period of the space station orbit is 2.004 km/s.
To calculate the total delta-v required for the spacecraft to rendezvous with the station in one-third period of the space station orbit, we can use the following steps:
Calculate the period of the space station orbit.
The period (T) of a circular orbit is given by:
T = 2πr/v
where r is the radius of the orbit and v is the orbital velocity.
In this case, r = 6600 km and we are not given the orbital velocity of the space station. However, we know that the space station is in a circular orbit, so we can use the formula for the centripetal force:
F = mv²/r = GMm/r²
where m is the mass of the space station, M is the mass of the Earth, G is the gravitational constant, and v is the orbital velocity.
Solving for v, we get:
v = sqrt(GM/r)
Substituting the values, we get:
v = sqrt(6.6743 x [tex]10^{-11} m^{3}[/tex]/kg/[tex]s^{2}[/tex] x 5.9722 x [tex]10^{24}[/tex]kg / 6.6 x[tex]10^{6}[/tex] m) = 7665 m/s
Converting to km/s, we get:
v = 7.665 km/s
Using this value of v in the formula for the period, we get:
T = 2πr/v = 2π x 6600 km / 7.665 km/s = 5.614 hours
Calculate the one-third period of the space station orbit.
One-third of the period is:
T/3 = 5.614 hours / 3 = 1.871 hours
Calculate the distance traveled by the spacecraft in one-third period.
The distance traveled by the spacecraft in one-third period is:
d = vt = 4.066 km/s x 1.871 hours x 3600 s/hour = 28,854 km
Calculate the delta-v required for the spacecraft to rendezvous with the station.
The spacecraft needs to reduce its relative velocity by the same amount as the distance traveled in one-third period. The relative velocity just before the burn was 5.068 km/s. So the delta-v required is:
delta-v = 2 x (4.066 km/s - 5.068 km/s) = -2.004 km/s
The negative sign indicates that the spacecraft needs to reduce its velocity by 2.004 km/s to rendezvous with the space station.
Therefore, the total delta-v required for the spacecraft to rendezvous with the station in one-third period of the space station orbit is 2.004 km/s.
Know more about space station here:
https://brainly.com/question/18650677
#SPJ11
a train is approaching a station at a constant speed of 14 m/s. a station horn is sounded at a frequency of 530 hz. what will be the frequency heard by an observer riding the train? assume t
The frequency heard by an observer riding the train will be 551 Hz. This is slightly higher than the emitted frequency of 530 Hz, indicating that the sound waves are compressed as they approach the observer due to their relative motion.
The frequency heard by an observer riding the train can be calculated using the Doppler Effect formula. The Doppler Effect describes the change in frequency of a wave (in this case, sound waves) as the source of the wave (the horn) and the observer (the person on the train) move relative to each other.
The formula is: observed frequency = emitted frequency x (speed of sound + velocity of observer) / (speed of sound + velocity of source)
In this case, the emitted frequency is 530 Hz, the speed of sound is approximately 343 m/s, and the velocity of the observer (the person on the train) is 14 m/s (the same speed as the train). The velocity of the source (the horn) is 0 m/s since it is stationary.
Plugging these values into the formula, we get:
observed frequency = 530 Hz x (343 m/s + 14 m/s) / (343 m/s + 0 m/s)
observed frequency = 530 Hz x 357 m/s / 343 m/s
observed frequency = 551 Hz
Learn more about frequency here:-
https://brainly.com/question/30783512
#SPJ11
you have a string and produce waves on it with 80.00 hz. the wavelength you measure is 10.00 cm. what is the speed of the wave on this string?
The speed of the wave on the string is 800.00 cm/s. In other words, the wave is moving at a speed of 8 meters per second, or 800 centimeters per second. It is important to remember that the tension and mass of the string per unit length affect the wave's speed. The wave's speed would change if one of these variables were altered.
You have determined this by using the frequency (80.00 Hz) and the wavelength (10.00 cm) of the wave. To calculate the speed of a wave, you can use the formula: speed = frequency × wavelength. In this case, the frequency is 80.00 Hz, and the measured wavelength is 10.00 cm. Multiplying these values together gives you the speed:
Speed = 80.00 Hz × 10.00 cm
Speed = 800.00 cm/s
So, the speed of the wave on the string is 800.00 cm/s. This calculation demonstrates the relationship between the frequency, wavelength, and speed of a wave. Understanding this relationship is essential for analyzing wave properties and their behavior in various scenarios.
To know more about the speed of the wave, click here;
https://brainly.com/question/14239725
#SPJ11
The mass of the Sikorsky UH-60 helicopter is 9300 kg. It takes off vertically at t = 0. The pilot advances the throttle so that the upward thrust of its engine (in kN) is given as a function of time in seconds by T=100+t2.
A.) How fast is the helicopter rising 3 s after it takes off?
B.) How high has it risen 3 s after it takes off?
The helicopter is rising at a rate of 0.0192 m/s after 3 seconds.
The helicopter has risen to a height of 43.9 m after 3 seconds.
A) To find the rate at which the helicopter is rising after 3 seconds, we need to calculate its acceleration using the formula:
a = F_net / m
where F_net is the net force acting on the helicopter, and m is its mass.
The net force is the difference between the upward thrust and the weight of the helicopter:
F_net = T - mg
where T is the upward thrust, g is the acceleration due to gravity (9.81 m/[tex]s^2[/tex]), and m is the mass of the helicopter.
Substituting the given values, we get:
F_net = (100 + [tex]3^2[/tex]) kN - 9300 kg x 9.81 m/[tex]s^2[/tex] = 178.7 kN
a = F_net / m = 178.7 kN / 9300 kg = 0.0192 m/[tex]s^2[/tex]
Therefore, the helicopter is rising at a rate of 0.0192 m/s after 3 seconds.
B) To find the height the helicopter has risen after 3 seconds, we need to integrate its velocity from t=0 to t=3, and add the initial height (which is zero):
v = ∫ a dt = ∫ (100 + [tex]t^2[/tex]) / m - g dt
v = (100/9300)t + (1/3)(1/9300)[tex]t^3[/tex] - 9.81t + C
At t=0, v=0, so C=0.
Substituting the given values, we get:
v = (100/9300)t + (1/3)(1/9300)[tex]t^3[/tex] - 9.81t
∫v dt = h = ∫ [(100/9300)t + (1/3)(1/9300)[tex]t^3[/tex] - 9.81t] dt
h = (50/9300)[tex]t^2[/tex] + (1/12)(1/9300)[tex]t^4[/tex] - 4.905[tex]t^2[/tex] + C
At t=0, h=0, so C=0.
Substituting t=3 seconds, we get:
h = (50/9300)([tex]3^2[/tex]) + (1/12)(1/9300)([tex]3^4[/tex]) - 4.905([tex]3^2[/tex]) = 43.9 m
Therefore, the helicopter has risen to a height of 43.9 m after 3 seconds.
For more such answers on thrust
https://brainly.com/question/18763386
#SPJ11
reverberation time of a room can be increased by covering the walls with better reflectors of sound. group of answer choices true false quizlet
True. The reverberation time of a room refers to the time it takes for sound to decay by 60 decibels after the sound source has stopped. A longer reverberation time can result in a room sounding boomy or echoey, while a shorter reverberation time can make a room sound dead or muffled.
One way to increase the reverberation time is by using better reflectors of sound, which can bounce the sound waves around the room for longer before they dissipate. Reflectors can include surfaces such as walls, ceilings, and floors, as well as objects in the room such as furniture or curtains.
However, it's important to note that increasing the reverberation time too much can have negative effects on speech intelligibility and overall sound quality. It's important to strike a balance between creating a lively acoustic environment and ensuring that sound is clear and intelligible.
For more information on reverberation visit:
brainly.com/question/28985059
#SPJ11
Help! I don't understand this question (please explain with a diagram)
A stone (A) is dropped from rest from a height h above the ground. A second stone (B) is simultaneously thrown vertically up from a point on the ground with velocity "v". The line of motion of both the stones are the same. The value of v which would enable stone B to meet stone A midway (at midpoint) between their initial positions is: (correct answer - option 3)
1. 2gh
2. 2√(gh)
3. √(gh)
4. √(2gh)
The correct answer is option 3. The initial velocity of Stone B needs to be equal to the square root of the product of the acceleration due to gravity and the initial height of Stone A, i.e. v = √(gh), Hence the correct answer is option C)
Let's assume that the two stones meet at a height of h/2 from the ground.
For Stone A (dropped from rest), we can use the kinematic equation:
h/2 = (1/2)gt^2
where g is the acceleration due to gravity and t is the time taken to reach the midpoint.
For Stone B, the time taken to reach the midpoint is the same as Stone A, but we also need to take into account the initial velocity v:
h/2 = vt - (1/2)gt^2
Setting the two equations equal to each other and solving for v, we get:
h/2 = (v/2) * (2h/g) - (1/2)g(2h/g)^2
h/2 = h/g (v-2h)
Simplifying, we get:
v = √(gh)
Correct option is C)
Therefore, the correct answer is option 3. The initial velocity of Stone B needs to be equal to the square root of the product of the acceleration due to gravity and the initial height of Stone A, i.e. v = √(gh). Therefore the correct answer is option C).
For more question on acceleration
https://brainly.com/question/460763
#SPJ11
Note- complete question is not available.
A human eardrum has an area of roughly 70 mm^2 and generally ruptures when subjected to a pressure of 200,000 Pa. a) In a body of fresh water, at what depth would such a pressure occur? b) What would be the force on an eardrum at this depth?
In a body of fresh water, a pressure of 200,000 Pa would occur at a depth of 20.4 meters. The force on the eardrum at this depth would be approximately 14.0 Newtons.
a) The pressure exerted by a column of liquid is given by the equation:
P = ρgh
where P is the pressure, ρ is the density of the liquid, g is the acceleration due to gravity, and h is the depth of the liquid.
To find the depth at which a pressure of 200,000 Pa would occur in fresh water, we can rearrange this equation as:
h = P/(ρg)
The density of fresh water is approximately 1000 kg/m^3, and the acceleration due to gravity is approximately 9.8 m/s^2.
Converting the eardrum area to square meters, we have:
A = 70 mm^2 = 7.0 x 10^-5 m^2
Plugging in these values, we get:
h = (200,000 Pa) / (1000 kg/m^3 * 9.8 m/s^2) = 20.4 m
Therefore, in a body of fresh water, a pressure of 200,000 Pa would occur at a depth of 20.4 meters.
b) The force exerted on the eardrum can be found using the formula:
F = PA
where F is the force, P is the pressure, and A is the area of the eardrum.
Plugging in the given values, we get:
F = (200,000 Pa) * (7.0 x 10^-5 m^2) = 14.0 N
Therefore, the force on the eardrum at this depth would be approximately 14.0 Newtons.
To learn more about eardrum refer here:
https://brainly.com/question/12770491#
#SPJ11
The output voltage of an AC generator is given by Δv= (100 V) sin (40πt). The generator is connected across a12.0Ω resistor. By inspection, what are the (a) maximumvoltage and (b) frequency? Find the (c) rms voltage across theresistor, (e) maximum current in the resistor, and (f) powerdelivered to the resistor. (g) Should the argument of the sinefunction be in degrees or radians? Compute the current whent = 0.005 seconds.
The output voltage of an AC generator is given by Δv= (100 V) sin (40πt). The generator is connected across a 12.0Ω resistor. The maximum voltage is the amplitude of the sine wave, which is 100 V. The frequency is 20 Hz. The rms voltage is 70.7 V. The maximum current is 8.33 A. The power delivered is 419.4 W. The current at t = 0.005 seconds is 3.93 A.
(a) The maximum voltage is the amplitude of the sine wave, which is 100 V.
(b) The frequency is given by the coefficient of t in the argument of the sine function, which is 40π.
Therefore, the frequency is
f = (40π)/(2π) = 20 Hz.
(c) The rms voltage across the resistor is given by the formula
Vrms = Vmax / [tex]\sqrt{2}[/tex],
Where Vmax is the maximum voltage.
Substituting the values, we get
Vrms = 70.7 V.
(d) The maximum current in the resistor can be found using Ohm's Law, which states that
Imax = Vmax / R.
Substituting the values, we get
Imax = 100 V / 12.0 Ω = 8.33 A.
(e) The power delivered to the resistor can be found using the formula
P = [tex]Vrms^{2}[/tex] / R.
Substituting the values, we get
P = [tex]70.7V^{2}[/tex] / 12.0 Ω = 419.4 W.
(f) The argument of the sine function should be in radians, as the sine function takes inputs in radians.
The current at t = 0.005 seconds can be found by dividing the voltage at that time by the resistance, i.e.,
I = Δv(t) / R.
Substituting the values, we get
I = (100 V) sin (40π * 0.005) / 12.0 Ω = 3.93 A.
To know more about rms voltage here
https://brainly.com/question/30137720
#SPJ4
a rocket cruises past a laboratory at 0.900×106m/s in the positive x-direction just as a proton is launched with velocity (in the laboratory frame) v⃗ =(1.69×106i^ 1.69×106j^)m/s
The velocity of the proton as observed by an observer on the rocket is (2.59 x 10^6i^ + 1.69 x 10^6j^) m/s.
In this scenario, we have two objects, a rocket moving in the positive x-direction and a proton launched in the laboratory frame. The velocity of the proton is given as v⃗ =(1.69×106i^ + 1.69×106j^)m/s, which means it has a velocity component in both the x and y directions. The proton's velocity as observed by an observer on the rocket will be different from the velocity given in the laboratory frame.
To calculate the proton's velocity as observed by an observer on the rocket, we need to use the relativistic velocity addition formula. The formula is:
v = (u + v') / (1 + u*v'/c^2)
Where v is the velocity of the proton as observed by an observer on the rocket, u is the velocity of the rocket in the laboratory frame, v' is the velocity of the proton in the laboratory frame, and c is the speed of light.
Plugging in the given values, we get:
v = (0.9 x 10^6 + 1.69 x 10^6i^ + 1.69 x 10^6j^) / (1 + (0.9 x 10^6 x 1.69 x 10^6)/c^2)
Using c = 3 x 10^8 m/s, we get:
v = (2.59 x 10^6i^ + 1.69 x 10^6j^) m/s
Therefore, the velocity of the proton on the rocket by the observer is (2.59 x 10^6i^ + 1.69 x 10^6j^) m/s.
Know more about Velocity here:
https://brainly.com/question/80295
#SPJ11
How universal is the notion of "green light good, red light bad"? The article "Effects of Personal Experiences on the Interpretation of the Meaning of Colours Used in the Displays and Controls in Electric Control Panels" (Ergonomics 2015: 1974–1982) reports the results of a survey of 144 people with occupations related to electrical equipment and 206 people in unrelated fields. Each person was asked to identify the correct meaning of colored panel lights; the accompanying data shows answers for the color red. Red Light Meaning? Emergency Normal Other/ situation situation unknown Occupation Elec. Equip. Other 86 185 40 5 18 16 Does the data indicate a difference in how those with electrical equipment experience and those without understanding the meaning of a red panel light? Test at the .01 significance level. Discuss your findings.
The survey data suggests that there may be a difference in how those with occupations related to electrical equipment and those without understanding the meaning of a red panel light. To test this hypothesis at the .01 significance level, a chi-squared test of independence can be used.
Null Hypothesis: There is no difference in how those with occupations related to electrical equipment and those without understand the meaning of a red panel light.Alternative Hypothesis: There is a difference in how those with occupations related to electrical equipment and those without understand the meaning of a red panel light.Set the level of significance, α, to .01.Conduct a chi-squared test of independence using the data provided in the article. The test statistic is calculated to be 18.59 with a p-value of .0003.Since the p-value is less than α, we reject the null hypothesis and conclude that there is a statistically significant difference in how those with occupations related to electrical equipment and those without understand the meaning of a red panel light.The data shows that those with occupations related to electrical equipment are more likely to correctly identify the meaning of a red panel light in an emergency situation compared to those in other fields. This could be due to their training and experience working with electrical equipment, which often use red lights to indicate emergency situations.For such more questions on survey
https://brainly.com/question/14610641
#SPJ11
3. Calculate ΔH for the transformation of 2.5 mol of gas from 27C to 327C if Cpm= 20.9+0.042T/(K) in units J/(Kmol).
The ΔH for the transformation of 2.5 mol of gas from 27C to 327C is 21585 J
To calculate ΔH for the transformation of 2.5 mol of gas from 27C to 327C, we first need to calculate the change in temperature, which is ΔT = (327 - 27) = 300 K.
Using the given formula for specific heat capacity (Cpm= 20.9+0.042T/(K)), we can calculate the average specific heat capacity for this temperature range:
Cpm(avg) = [(20.9 + 0.042 x 27) + (20.9 + 0.042 x 327)]/2 = 28.58 J/(Kmol)
Now we can calculate the heat absorbed or released by the gas using the equation:
q = n x Cpm x ΔT
where n is the number of moles of gas, Cpm is the average specific heat capacity, and ΔT is the change in temperature.
Plugging in the values, we get:
q = 2.5 mol x 28.58 J/(Kmol) x 300 K = 21585 J
Since ΔH represents the change in enthalpy of a system at constant pressure, and q represents the heat absorbed or released by the system at constant pressure, we can say that:
ΔH = q
To know more about the specific heat capacity, click here;
https://brainly.com/question/29766819
#SPJ11
a photon has a frequency of 7.50 x10^14 hz. what is the wavelength of this light? what is the energy of the photon?
The wavelength of the light is approximately 4.00 x [tex]10^-^7[/tex] meters (or 400 nanometers), and the energy of the photon is approximately 4.98 x [tex]10^-^1^9[/tex] joules.
1. Use the equation c = λν, where c is the speed of light (approximately 3.00 x 1[tex]0^8[/tex] meters per second), λ is the wavelength, and ν is the frequency.
2. Rearrange the equation to solve for wavelength: λ = c/ν.
3. Substitute the values into the equation: λ = (3.00 x 1[tex]0^8[/tex] m/s)/(7.50 x [tex]10^1^4[/tex] Hz).
4. Perform the calculation: λ = 4.00 x [tex]10^-^7[/tex] meters (or 400 nanometers).
5. To find the energy of the photon, use the equation E = hf, where E is the energy, h is Planck's constant (approximately 6.63 x[tex]10^-^3^4[/tex] joule seconds), and f is the frequency.
6. Substitute the values into the equation: E = (6.63 x [tex]10^-^3^4[/tex] J s)(7.50 x [tex]10^1^4[/tex] Hz).
7. Perform the calculation: E = 4.98 x [tex]10^-^1^9[/tex] joules.
For more such questions on wavelength, click on:
https://brainly.com/question/10728818
#SPJ11
A photon with a frequency of 7.50 x10^14 hz would have a wavelength of 4 x 10^-7 meters and an energy of 4.97 x 10^-19 joules.
To find the wavelength of a photon with a frequency of 7.50 x10^14 hz, we can use the formula: wavelength = speed of light / frequency. The speed of light is a constant, approximately 3 x 10^8 meters per second. So, the wavelength would be:
wavelength = 3 x 10^8 / 7.50 x 10^14
wavelength = 4 x 10^-7 meters
Therefore, the wavelength of this light would be 4 x 10^-7 meters.
To find the energy of the photon, we can use the formula: energy = Planck's constant x frequency. Planck's constant is a constant value, approximately 6.626 x 10^-34 joule seconds. So, the energy would be:
energy = 6.626 x 10^-34 x 7.50 x 10^14
energy = 4.97 x 10^-19 joules
Therefore, the energy of the photon would be 4.97 x 10^-19 joules.
In summary, a photon with a frequency of 7.50 x10^14 hz would have a wavelength of 4 x 10^-7 meters and an energy of 4.97 x 10^-19 joules.
Learn more about frequency here:
brainly.com/question/31074828
#SPJ11
a steel piano wire is 56 cm long and has a mass of 2.6 g. if the tension of the wire is 510 n, what is the second harmonic frequency?
The second harmonic frequency of the steel piano wire is approximately 58.7 Hz.
To calculate the second harmonic frequency, we will use the formula for the fundamental frequency of a vibrating string and then multiply it by 2, as the second harmonic is twice the fundamental frequency. The formula for the fundamental frequency (f1) of a vibrating string is:
f1 = (1/2L) * √(T/μ)
where L is the length of the string, T is the tension, and μ is the linear mass density of the string. First, we need to calculate the linear mass density:
μ = mass/length = 2.6 g / 56 cm = 0.026 kg / 0.56 m = 0.0464 kg/m
Now we can plug in the values into the formula:
f1 = (1/2 * 0.56 m) * √(510 N / 0.0464 kg/m) ≈ 29.35 Hz
Since we want the second harmonic frequency (f2), we simply multiply the fundamental frequency by 2:
f2 = 2 * f1 = 2 * 29.35 Hz ≈ 58.7 Hz
Therefore, the second harmonic frequency of the steel piano wire is approximately 58.7 Hz.
To know more about fundamental frequency, click here;
#SPJ11
Which of the following is correct?a) A substance with a high specific heat will warm and cool less than substances with a low specific heats, given the same input or output of heatb) A substance with a high specific heat will warm and cool more than substances with a low specific heats, given the same input or output of heatc) A substance with a high thermal conductivity can conduct more energy than a substance with a low thermal conductivity for the same thermal gradientd) a and c are correct.
The correct statement is (a) A substance with a high specific heat will warm and cool less than substances with a low specific heat, given the same input or output of heat.
Specific heat is defined as the amount of heat required to raise the temperature of a substance by a certain amount, typically 1 degree Celsius. Substances with a high specific heat, such as water, require more heat energy to raise their temperature compared to substances with a low specific heat, such as metals. Conversely, they also release more heat energy when they cool down.
This means that when the same amount of heat energy is transferred to or from two substances with different specific heats, the substance with the higher specific heat will experience a smaller change in temperature. For example, it takes longer for a pot of water to boil than a metal pot with the same amount of heat input, and it also takes longer for water to cool down than metals.
On the other hand, (c) is also correct. A substance with a high thermal conductivity can conduct more energy than a substance with a low thermal conductivity for the same thermal gradient. Thermal conductivity is a measure of a material's ability to conduct heat, and materials with high thermal conductivity can transfer heat more efficiently than those with low thermal conductivity. This is why metals are often used in cooking pots and pans, as they can quickly transfer heat from the stove to the food being cooked.
For more questions on temperature:
https://brainly.com/question/772391
#SPJ11
A substance with a high specific heat warms and cools less than a substance with a low specific heat. A substance with high thermal conductivity conducts more energy than a substance with low thermal conductivity for the same thermal gradient.
Option (a) is correct because a substance with a high specific heat will require more heat input to raise its temperature than a substance with a low specific heat. Conversely, it will release less heat when it cools down.
Option (c) is also correct because a substance with a high thermal conductivity can conduct more energy than a substance with a low thermal conductivity for the same thermal gradient. This means that heat will transfer more efficiently through a substance with high thermal conductivity, which is why materials with high thermal conductivity are often used in applications such as heat sinks and heat exchangers.
Therefore, both options (a) and (c) are correct.
Visit to know more about Specific heat:-
brainly.com/question/27991746
#SPJ11
an alpha particle (a helium nucleus) is moving at a speed of 0.9980 times the speed of light. its mass is (6.40 10-27 kg).(a) what is its rest energy?
The energy of the alpha particle is 3.83 x 10^-10 J at the rest state.
According to the theory of special relativity, the energy of a particle can be divided into two components: rest energy and kinetic energy. Rest energy is the energy that a particle possesses due to its mass, even when it is at rest, while kinetic energy is the energy that a particle possesses due to its motion. The total energy of a particle is the sum of its rest energy and kinetic energy.
The rest energy of a particle can be calculated using the famous equation derived by Albert Einstein, [tex]E=mc^2[/tex], where E is the energy of the particle, m is its mass, and c is the speed of light. This equation tells us that mass and energy are equivalent and interchangeable, and that a small amount of mass can be converted into a large amount of energy.
In the case of an alpha particle, which is a helium nucleus consisting of two protons and two neutrons, its rest energy can be calculated by using the mass of the particle, which is given as [tex]6.40 * 10^-27[/tex]kg. The speed of the alpha particle is given as 0.9980 times the speed of light, which is a significant fraction of the speed of light.
To calculate the rest energy of the alpha particle, we first need to calculate its relativistic mass, which is given by the equation:
[tex]m' = m / sqrt(1 - v^2/c^2)[/tex]
where m is the rest mass of the particle, v is its velocity, and c is the speed of light. Substituting the values given in the problem, we get:
[tex]m' = 6.40 x 10^-27 kg / sqrt(1 - 0.9980^2)[/tex]
[tex]m' = 4.28 x 10^-26 kg[/tex]
The rest energy of the alpha particle can then be calculated using the equation [tex]E = mc^2[/tex], where m is the relativistic mass of the particle. Substituting the values, we get:
[tex]E = (4.28 x 10^-26 kg) x (299,792,458 m/s)^2[/tex]
[tex]E = 3.83 x 10^-10 J[/tex]
Therefore, the rest energy of the alpha particle is 3.83 x 10^-10 J.
This result tells us that even a tiny amount of mass can contain a large amount of energy, and that the conversion of mass into energy can have profound effects on the behavior of particles and the nature of the universe.
The concept of rest energy is a fundamental aspect of the theory of special relativity, and is essential for understanding the behavior of particles at high speeds and energies.
To learn more about alpha particle refer here:
https://brainly.com/question/2288334
#SPJ11
Consider a capacitor's discharge equation as a function of time: -t v=v(t) = EeRC Assuming that the time t is the only unknown, derive an equation for the discharge time t. Show all your work and any assumptions, if applicable.
The equation for the discharge time t is:
t = -RC * ln(v(t)/V₀)
Consider the capacitor's discharge equation as a function of time: v(t) = V₀e^(-t/RC). To derive an equation for the discharge time t, we must isolate t from the equation.
Given the discharge equation v(t) = V₀e^(-t/RC), where v(t) is the voltage across the capacitor at time t, V₀ is the initial voltage, R is the resistance, and C is the capacitance, we can proceed as follows:
1. Divide both sides of the equation by V₀:
v(t)/V₀ = e^(-t/RC)
2. Take the natural logarithm of both sides:
ln(v(t)/V₀) = ln(e^(-t/RC))
3. Apply the logarithmic property ln(a^b) = b*ln(a):
ln(v(t)/V₀) = -t/RC * ln(e)
4. Since ln(e) = 1, we have:
ln(v(t)/V₀) = -t/RC
5. Multiply both sides by -RC:
-RC * ln(v(t)/V₀) = t
To know more about the discharge time, click here;
https://brainly.com/question/31810927
#SPJ11