The horizontal distance the fish travels before hitting the water is independent of the height the fish is dropped from, and the speed at which the pelican is traveling. The horizontal distance is determined only by the time the fish is in the air, which can be found using the equation:
Distance = Speed * Time
To find the time, we use the equation:
Time = sqrt(2 * Distance / Acceleration due to gravity)
Where distance is the height the fish is dropped from (5.4m) and the acceleration due to gravity is 9.8 m/s^2
Time = sqrt(2 * 5.4 / 9.8) = sqrt(2 * 5.4 / 9.8) = sqrt(1.08) = 1.03s
So the fish is in the air for 1.03s and the horizontal distance it travels is given by:
Distance = Speed * Time = 5.0m/s * 1.03s = 5.15m
So the fish will travel horizontally 5.15m before hitting the water.
The power lines are at a high potential relative to the ground, so there is an electric field between the power lines and the ground. To maximize the potential difference between one end of the fluorescent tube and the other, how should the tube be held? Select the best answer from the choices provided. View Available Hint(s) Select the best answer from the choices provided. The potential difference between the ends of the tube does not depend on the tube's orientation. The tube should be held horizontally, parallel to the ground. The tube should be held vertically, perpendicular to the ground.
Answer:
The tube should be held vertically and perpendicular to the ground.
Explanation:
Answer: The tube should be held vertically and perpendicular to the ground. The reason is as follows:
Reasoning:
The power lines are parallel to the ground hence, their electric field will be perpendicular to the ground and equipotential surface will be cylindrical.
Hence, if you will put fluorescent tube parallel to the ground then both the ends of the tube will lie on the same equipotential surface and the potential difference will be zero.
So, to maximize the potential the ends of the tube must be on different equipotential surfaces. The surface which is near to the power line has high potential value and the surface which is farther from the line has lower potential value.
hence, to maximize the potential difference, the tube must be placed perpendicular to the ground.
Select the correct answer.
The oceanic Nazca plate is being subducted beneath the continental South American plate. Which type of plate boundary is this?
OA continental-oceanic convergent
ОВ. oceanic-oceanic convergent
OC divergent
OD. strike-slip
ОЕ.
transform
Reset
Next
Answer:
A. continental-oceanic convergent
Explanation:
I knew it couldn't be B because it's oceanic and continental, not oceanic and oceanic.
Next, I noticed the word convergent, which implies "coming together" to me.
I looked it up and noticed the term convergent referred to a plate boundary where a plate slips under (subducted) another, so I knew it was A.
Hopefully, this helps you understand the question better. Have a great day!
I need help on a homework question.
Chris shines a white light onto a surface, and the surface appears to be green. What color will the surface appear if he shines a combination of blue and green light on the surface?
A. brown
B. white
C. green
D. black
Answer:
green
Explanation:
the the board is going to be green
Answer:
The surface will appear green if he shines the combination of blue and green light.
Explanation:
When Chris shines white light on the surface it appears green it means the surface is scattering only green light.it is called scattering of light.The material of the surface is absorbing rest of the colors.What is scattering of light ?When light passes through a medium , the particles of the medium or surface allows to reflect only a particular color ( wavelength), this phenomenon is called scattering of light.
Hence the surface will appear green .
Read it also for better understanding:-
https://brainly.com/question/9922540
#SPJ2
Jack weighs 170 lbs and is 72 inches tall. He is pulling horizontally on a door handle situated at his shoulder height. Actually, it is his body weight and lean that creates this pulling action (a hint). His center of mass while standing erect is 61 percent of his body height, measured from the floor upwards. The door handle is 60 inches above the ground, and again he is pulling purely horizontally on this handle.
If Jack's lean angle is 20 degrees and he is leaning back - pivoting about his heels, how much force does he apply to the door handle?
Include units in your answer, lbs.
Express your answer to the nearest 0.1 lbs.
Answer:
He is pulling horizontally on a door handle situated at his shoulder height. ... His Center Of Mass While Standing Erect Is 61 Percent Of His Body Height, Measured ... Actually, it is his body weight and lean that creates this pulling action (a hint).
72ibs
Energy Transformation and Conservation
Explain how different forms of energy are related.
Answer:
Energy transformation is when energy changes from one form to another – like in a hydroelectric dam that transforms the kinetic energy of water into electrical energy. While energy can be transferred or transformed, the total amount of energy does not change – this is called energy conservation.
Explanation:
HELP ITS FOR SCIENCE
1. Explain why a wrecking ball can destroy a building, but a yo-yo can’t. Use the term kinetic energy in your explanation.
2. How is speed related to kinetic energy?
Answer:
A wrecking ball has the capability to destroy a building due to the greater mass and kinetic energy than the yo-yo.
An electrically charged object creates an electric field. The electric potential due to this object:Group of answer choicesis a vector that points either towards or away from the object, depending on the sign of the chargeis a vector that makes circular paths around the objectis a non-negative scalaris a scalar but will be positive or negative depending on the sign of the charge
Answer:
It's a scalar but will be positive or negative depending on the sign of the charge.
Explanation:
The electric potential, at a given point, can be defined as the work per unit charge needed to bring a positive test charge from infinity to this point.It's positive if the charge creating the potential is positive (because it's needed that an external force do work on the test charge against the electric field that repels the positive charge).It's negative if the charge creating the potential is negative, because in this case the field will attract the positive test charge.Young David who slew Goliath experimented with slings before tackling the giant. He found that he could revolve a sling of length 0.600 m at the rate of 5.00 rev/s. If he increased the length to 0.900 m, he could revolve the sling only 3.00 times per second. (a) What is the speed of the stone for each rate of rotation
Answer:
Explanation:
For circular motion of stone the formula is
v = ω R where ω is angular velocity , v is linear velocity .
For first motion ,
R = length of sling = .6 m
ω = 2π n , n is no of revolution per second
ω = 2 x 3.14 x 5 = 31.4 rad /s
v = 31.4 x .6 = 18.84 m /s
For second motion ,
R = length of sling = .9 m
ω = 2π n , n is no of revolution per second
ω = 2 x 3.14 x 5 = 31.4 rad /s
v = 31.4 x .9 = 28.26 m /s
4. What is the acceleration of the car in each section?
b
с
d
a
Answer:
0-4 acceleration comes at 12 m/s where (B) stagnates at 12 m/s and remains for 4 seconds (C) is breaks being activated slowing the car to 6 m/s in 2 seconds and (D) over the course of 4 seconds brings the car to 10 m/s.
Explanation:
The name of the SI unit for magnetic field strength, such as that created around a current-carrying wire, is the
.
The name of the SI unit for magnetic field strength is Tesla. Magnetic fields are formed by moving electric charges.
What is Magnetic field strength?Magnetic field strength alludes to an actual amount that is utilized as one of the essential proportions of the power of the attractive field.
The SI unit of attractive field is tesla (T). 1 Tesla is defined as the magnetic field that carries 1C charge at the speed of 1m/s which is perpendicular to the force of 1 N.
Find more information about magnetic field strength here:
brainly.com/question/18651668
a surfer talks about riding a 20-foot wave. Which measurement of waves is the surfer describing?
frequency
amplitude
wavelength
speed
60 POINTS!!
Answer:
C. Amplitude
Explanation: Amplitude is the maximum displacement from the equilibrium of a wave. Basically the height.
A question to think about on units: Suppose we wanted to exchange scientific information with a newly discovered species of intelligent life living on a planet orbiting the star Alpha Centauri. And suppose that our new friends have managed to become fluent in our language, but have not yet had the opportunity to visit the Earth. Which of the following statements would they understand?
a. The mass of the electron is 9.10938188 x 10^-31.
b. The speed of light is 2.99792458 x 10^8 meters/second.
c. The ratio of the proton's mass to the electron's mass is 1836.153. Explain your reasoning
Answer:
b. The speed of light is 2.99792458 x 10^8 meters/second.
Explanation:
Speed of light is a universal constant and its value is same throughout the universe . So alien living near Alpha Centauri will quickly understand about it . But other statements are not universal . Mass of electron can vary as per relativistic formula of Einstein . Similarly , mass of proton can also vary according to relativistic concept . It depends upon the velocity of particle . So, the ratio of mass of proton and mass of electron will also vary from one star to another .
A 150.0 g baseball has a velocity of 28.5 m/s. What is its kinetic energy in J
Answer:
KE = 60.91875 J
Explanation:
First, convert the mass of the ball into kg, since we want the answer in J (SI system):
150 g = 0.15 kg
then use the kinetic energy formula
[tex]KE=\frac{1}{2} m*v^{2} \\KE=\frac{1}{2} (0.15)*(28.5)^{2}\\KE=60.91875 J[/tex]
2. The storage in a river reach at a specified time is 3 hectare-meters. At the same instant, the inflow to the reach is 15 m3/s and the outflow is 20 m3/s. One hour later, the inflow is 20 m3/s and the outflow is 20.5 m3/s. Determine the change in storage in the reach that occurred, during the hour. What is the storage at the end of the hour? (1 hectare = 10000 m2).
Answer:
The change in storage in the reach that occurred, during the hour = 43200 m3
The storage at the end of the hour = 129600 m3
Explanation:
Given
Storage = 3 hectare-meters
Inflow volume = 15 m3/s
Outflow volume = 20 m3/s
Storage in one hour of change
Inflow volume = 20 m3/s
Outflow volume = 20.5 m3/s
Outflow volume - Inflow volume = 0.5 m3/s = 0.5 * 24*60 * 60 = 43200 m3
Storage at the end of one hour
43200 m3 + (20-15) * 24*60 * 60 = 129600 m3
*How much energy is
transferred in lifting a 5 kg
Mass 3m
Answer:
147 J
Explanation:
The energy transferred to potential energy is :
U = m * g * h = (5 kg) * (9.8 m/s^2) * (3 m) = 147 J
A child holds a sled at rest on frictionless snow covered hill. if the sled weighs 77N,find the force T exerted by the rope on the sled and the force n exerted by the hill on the sled
Answer:62
Explanation:
The weight of the sled is 77 N. The force by the hill on the sled is equal to its weight that is 77 N. Then the tension force exerted by the rope on the sled is being 77N sin θ, where θ be the angle of inclination.
What is force?Force is an external agent acting on an object to change its motion or to deform it. There are various kinds of force like magnetic force, tension force, frictional force, gravitational force etc.
The weight that an object experience on earth is due to the gravitational force. The force that is exerted by a rope on an object is tension force since it is pulling from a side.
The normal force by the hill on the sled is equal to its weight that is 77 N. The tension force on the sled by the rope is dependent on the angle of inclination θ. If know the angle we can find T by the equation:
T = 77 sin θ.
Find more on tension force:
https://brainly.com/question/29124835
#SPJ5
how could you get the pancake to cook faster without burning it?
Answer:
put it in medium to full heat and set an alarm so that it doesn't burn
Answer:
when you're cooking your pancakes, use clarified butter and cook on medium heat.
Scientists have investigated how quickly hoverflies start beating their wings when dropped both in complete darkness and in a lighted environment. Starting from rest, the insects were dropped from the top of a 50 - cm tall box. In the light, those flies that began flying 200 m s after being dropped avoided hitting the bottom of the box 87 % of the time, while those in the dark avoided hitting only 25 % of the time.
Required:
a. How far would a fly have fallen in the 200 ms before it began to beat its wings?
b. How long would it take for a fly to hit the bottom if it never began to fly? In seconds.
Answer:
Explanation:
a )
Hoverfly will fall with acceleration equal to g .
Initial velocity of fall of hoverflies u = 0
displacement ( vertical ) h = ?
time t = 0.2 s
acceleration due to gravity g = 9.8 m / s²
h = ut + 1/2 g t²
= 0 + .5 x 9.8 x .2²
= .196 m
= 19.6 cm
b )
Time taken to fall by 50 cm or 0.5 m under free fall from initial position .
.5 = 0 + .5 x 9.8 t²
t² = .1020
t = .319 s = 319 ms .
Example 2.1
A car travels at an average speed of 100 kmh-1
what distance does it cover in 5 minutes?
Answer:
5 min 20 km --------
Explanation:
5 min 20 km --------
Can someone help please
Answer:
The average blood speed is 0.39 m/s
Explanation:
According to Poiseuille’s law, the volume flow rate, Q (m³/s) of a fluid of
viscosity η through a tube or pipe of radius r and length L is:
Q = πr⁴ΔP/8ηL
where ΔP is the change in pressure or pressure difference of the fluid; L is length of the pipe
Also, the volume flow rate, Q, is related to the average velocity v, by the formula:
Q = Av
where A is the cross-sectional area of the pipe; A = πr²
Q = πr²v
Thus, the Poiseuille’s becomes: πr²v = πr⁴ΔP/8ηL
v = r²ΔP/8ηL
From the given values:
r = 2.5 mm = 0.0025 m
L = 15 cm = 0.15 m
ΔP = 380 Pa
η = 5 * 10⁻³ Pa.s
substituting the given values in the equation
v = {(0.0025)² * 380} / (8 * 5 * 10⁻³ * 0.15)
v = 0.39 m/s
Therefore, the average blood speed is 0.39 m/s
Tyler and Jim race each other up a mountain on their bicycles. Tyler rides a road bike on the switchbacks of the twisting and turning mountain road. Jim rides a mountain bike and follows a direct, but steeper, straight-line path up the mountain. They start at the same time and place at the bottom of the mountain and finish at the same time and place at the top of the mountain. From start to finish a. whose distance traveled was longer? b. whose displacement was longer? c. which rider had the faster average speed? d. which rider had the faster average velocity? e. who won the race?
Answer:
Explanation:
Displacement is minimum distance between initial and final point .
Distance is total length of path covered in a journey .
a )
Tyler covered a longer distance in the journey because total length of path covered by him is longer due to curved path .
b )
Both have same displacement , because minimum distance between initial and final point in both the case is same .
c )
average speed = distance / time
as time is same for both the case ,
average speed ∝ distance
As distance covered by Tyler is more , his average speed is more .
d )
average velocity = displacement / time
As both displacement and time are same in both the case , average velocity in both the case is same .
e )
They start at the same time and place at the bottom of the mountain and finish at the same time , both have tie and nobody won the race , in spite of speed of Tyler being greater .
To increase the gravitational force between the two objects above, I could
Your answer:
A. increase the mass of the objects and decrease the distance between the objects.
B. increase BOTH the distance and the mass between the two objects
C. decrease the mass of the objects and increase the distance between the objects.
D. decrease BOTH the mass and distance between the two objects.
Answer:
Option A
Explanation:
Write the laws of reflection
Answer:
i) Angle of Reflection = Angle of Incident
ii) Total Angle = 2x Angle of reflection/incidence
iii) The incident ray, reflected ray and the point of incidence lie in the same plane
Hope it helped u,
pls mark as the brainliest - Ayaan707 for help :) -
^_^
Sketch the resultant field pattern around the following current carrying conductors and
show the direction of the forces acting on the conductor.
What does a mass extinction look like in the fossil record?
O A. A layer of rock contains only fossils of living things that no longer
exist on Earth.
B. A layer of rock contains only fossils of species that presently exist
on Earth.
O C. A younger layer of rock contains a much greater variety of fossils
than a slightly older layer of rock does.
D. An older layer of rock contains a much greater variety of fossils
than a slightly younger layer of rock does.
Answer:
the answer is D
Explanation:
Mass extinctions were first identified by the obvious traces they left in the fossil record. ... Such dramatic changes in adjacent rock layers make it clear that mass extinctions were geologically rapid and suggest that they were caused by catastrophic events (e.g., a period of intense volcanic activity).
Mass extinction events wiped out many species at the same time resulting in older rock layers having more fossil variety than younger rock layers.
What are mass extinction events?Mass extinction events are events which resulted in the mass death of many species of organisms.
Mass extinction events are presumed to have occurred in the past as seen from gaps in the fossils records.
Mass extinction events are thought to have occurred through intense volcanic activity in a particular area.
A mass extinction event in the fossil record will show an older layer of rock containing a much greater variety of fossils than a slightly younger layer of rock does.
Therefore, mass extinction events wiped out many species at the same time.
Learn more about mass extinction at: https://brainly.com/question/242208
#SPJ2
Estimate the constant rate of withdrawal (in m3 /s) from a 1375 ha reservoir in a month of 30 days during which the reservoir level dropped by 0.75 m in spite of an average inflow into the reservoir of 0.5 Mm3 /day. During the month, the average seepage loss from the reservoir was 2.5 cm, total precipitation on the reservoir was 18.5 cm and the total evaporation was 9.5 cm
Answer:
Explanation:
1 ha = 10⁴ m²
1375 ha = 1375 x 10⁴ m² = 13.75 x 10⁶ m²
In flow in a month = .5 x 10⁶ x 30 m³ = 15 x 10⁶ m³
Net inflow after all loss = 18.5 - 9.5 - 2.5 cm = 6.5 cm = .065 m
Net inflow in volume = 13.75 x 10⁶ x .065 m³= .89375 x 10⁶ m³
Let Q be the withdrawal in m³
Q - 15 x 10⁶ - .89375 x 10⁶ = 13.75 x 10⁶ x .75 = 10.3125 x 10⁶
Q = 26.20 x 10⁶ m³
rate of withdrawal per second
= 26.20 x 10⁶ / 30 x 24 x 60 x 60
= 26.20 x 10⁶ / 2.592 x 10⁶
= 10.11 m³ / s
The rate of withdrawal is 10.11 cubic meter per second
Given-
Total reservoir is 1375 hectare. which is equal to [tex]1375\times 10^4[/tex] meter square.
The average seepage loss from the reservoir is 2.85 cm or 0.0285 m.
Total precipitation on the reservoir is 18.5 cm or 0.185 m.
Total evaporation is 9.5 cm or 0.085 m.
The average inflow into the reservoir is [tex]0.5\times10^6[/tex] cubic meter per day.
The total inflow in a month can be calculate is
[tex]=0.5\times 30=1500\times10^4[/tex]
Net inflow is equal to the total precipitation on the reservoir subtract by all the losses.It can be represent as,
[tex]Q_{net}=0.185 - 0.095 - 0.025[/tex]
[tex]Q_{net}=0.065[/tex]
Total volume inflow is equal to the product of net inflow and total reservoir,
[tex]V_{net} =1375\times 10^4\times Q_{net}[/tex]
[tex]V_{net} =1375\times 10^4\times 0.065[/tex]
[tex]V_{net} =89.375[/tex]
The constant rate of withdrawal in cubic meter can be calculated by adding the net inflow in a month, total volume inflow and the reservoir.
[tex]Q=1375\times 10^4\times 0.75+89.375\times 10^4+1500\times10^4[/tex]
[tex]Q=2620\times10^4[/tex]
For per second withdrawal,
[tex]Q=\dfrac{2620\times10^4}{30\times24\times60\times60}[/tex]
[tex]Q=10.11[/tex]
Hence, the rate of withdrawal is 10.11 cubic meter per second.
For more about the flow, follow the link below,
https://brainly.com/question/1410288
Question 15 of 25
What is the period of a wave that has a frequency of 30 Hz?
Answer:
0.033 seconds
Explanation:
Period = 1/30 = 0.033 seconds
Answer:
The answer is 0.03 s
Explanation:
A.P.E.X.
1 What is a vector field?
2 How do you know that potential energy is converted into kinetic energy in certain force fields?
3 What is the rule on electric charges attracting or repelling?
Opposites attract, equals repel
4 How can atoms use electric charges to bond?
5 Where is the potential energy of a magnet stored?
6 How can you tell which pole is the north and which pole is the south in a magnet?
7 How can you increase the potential energy of a magnetic field?
8 If you have two charges alone in space, what will they do to each other?
9 What must occur in magnets to have it generate a magnetic field?
10 What is an electromagnet? A magnet that is made from metal and electrified and with a coil
Answer:
1. a vector field is an assignment of a vector to each point in a subset of space.
2. The direct answer is that it happens through Newton’s second law. If an object is in a potential field that is different at different points in space, then the object will experience a force in the direction in which the potential energy decreases. Newton’s second law says that a force causes a change in motion, which changes the kinetic energy.
3. According to Coulomb, the electric force for charges at rest has the following properties: Like charges repel each other; unlike charges attract. Thus, two negative charges repel one another, while a positive charge attracts a negative charge. The attraction or repulsion acts along the line between the two charges.
4. Ions are charged atoms that form when an atom donates or accepts one or more negatively charged electrons. Cations (ions with a positive charge) are attracted to anions (ions with a negative charge). This attraction is called an ionic bond.
5. Magnetic Field
Hope it Helps!!!!
1. A wheel with spokes of length r has four masses
attached at various points where the spokes intersect the
circumference of the wheel. The wheel and spokes are
massless and spokes are all 30° apart. Determine the net
torque on the wheel.
(A) Zero (B) 22 (C) 13/2
(D) 1
a 6.25-gram bullet traveling at 365 ms strikes and enters a 4.50-kg crate. The crate slides 0.15 m along a wood floor until it comes to rest. What is the change in kinetic energy of the system after the collision
Answer:
the change in kinetic energy of the system is 0.577 J
Explanation:
Given;
mass of the bullet, m₁ = 6.25 g = 0.00625 kg
initial velocity of the bullet, u₁ = 365 m/s
mass of the crate, m₂ = 4.5 kg
initial velocity of the crate, u₂ = 0
distance moved by the system after collision, d = 0.15 m
Determine the final velocity of the system after collision;
m₁u₁ + m₂u₂ = v (m₁ + m₂)
0.00625 x 365 + 4.5 x 0 = v(0.00625 + 4.5)
2.2813 + 0 = v(4.5063)
2.2813 = v(4.5063)
v = 2.2813 / 4.5063
v = 0.506 m/s
The change in kinetic energy of the system after collision is calculated as;
ΔK.E = ¹/₂ (m₁ + m₂)v²
ΔK.E = ¹/₂ (4.506) x 0.506²
ΔK.E = 0.577 J
Therefore, the change in kinetic energy of the system is 0.577 J